Do you use t-handles?

Micahdogg
Profile picture for user Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
Micahdogg
Edited Date/Time 4/22/2020 6:01pm
Thats all. Just wondering if you use t-handles or 8, 10, 12 mm sockets.
2
|
scott_nz 4/18/2020 10:01pm
4/18/2020 10:01pm
yes, have 8 10 12 t bars in the toolbox,
4
chump6784
Profile picture for user chump6784
Posts
1776
Joined
5/9/2011
Location
AU
chump6784 4/18/2020 10:09pm
4/18/2020 10:09pm
Nope, I use a ratchet with an extension bar and sockets. I find T handles have limitations where they can't get to as easy as a ratchet with extension bar
2
Mossy
Profile picture for user Mossy
Posts
438
Joined
7/6/2018
Location
Newport News, VA, USA
Mossy 4/18/2020 10:14pm
4/18/2020 10:14pm
Sometimes i pull out the ratchet and extension if its more convenient but I like my T handles as well Cool
3
pbody
Profile picture for user pbody
Posts
350
Joined
12/9/2014
Location
Phoenix, AZ, USA
pbody 4/18/2020 10:19pm
4/18/2020 10:19pm
Mossy wrote:
Sometimes i pull out the ratchet and extension if its more convenient but I like my T handles as well Cool
Second this.....t-handles for all the quick and easy stuff. Ratchets for harder to reach spots.
6

The Shop

See All »
Moto_Geek
Profile picture for user Moto_Geek
Posts
1826
Joined
6/26/2007
Location
Golden, CO, USA
Moto_Geek 4/18/2020 10:41pm
4/18/2020 10:41pm
Ratchet with extensions. T seems to speed up the project. I enjoy it with a ratchet. more foreplay.
5
slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog 4/18/2020 10:49pm
4/18/2020 10:49pm
I still have the same set of T's my dad bought when I was a kid. I mostly use my Motion Pro 3/8 drive T and just change the sockets so I only have one T on the bench.
8
Tonynz
Profile picture for user Tonynz
Posts
848
Joined
9/21/2014
Location
NZ
Tonynz 4/18/2020 11:01pm
4/18/2020 11:01pm
scott_nz wrote:
yes, have 8 10 12 t bars in the toolbox,
Gotta have a 13mm 🤔
5
bvm111
Profile picture for user bvm111
Posts
10130
Joined
7/1/2008
Location
Las Vegas, NV, USA
bvm111 4/18/2020 11:02pm
4/18/2020 11:02pm
slipdog wrote:
I still have the same set of T's my dad bought when I was a kid. I mostly use my Motion Pro 3/8 drive T and...
I still have the same set of T's my dad bought when I was a kid. I mostly use my Motion Pro 3/8 drive T and just change the sockets so I only have one T on the bench.
I have 1/4 drive MP and really like it for 8-10mm bolts for side panels, seat bolts and triple clamps and such!
3
Chance1216
Profile picture for user Chance1216
Posts
8797
Joined
4/1/2018
Location
Carson, CA, USA
Chance1216 4/18/2020 11:15pm
4/18/2020 11:15pm
Tonynz wrote:
Gotta have a 13mm 🤔
Rim locks?
nascarnate326
Profile picture for user nascarnate326
Posts
3008
Joined
11/3/2014
Location
Charlotte, MI, USA
nascarnate326 4/18/2020 11:16pm
4/18/2020 11:16pm
Motion pro t handles. Love them.
3
scott_nz 4/18/2020 11:22pm
4/18/2020 11:22pm
chump6784 wrote:
Nope, I use a ratchet with an extension bar and sockets. I find T handles have limitations where they can't get to as easy as a...
Nope, I use a ratchet with an extension bar and sockets. I find T handles have limitations where they can't get to as easy as a ratchet with extension bar
i still carry a socket set, but use the t bars where they are more useful,
mattyhamz2 4/18/2020 11:30pm
4/18/2020 11:30pm
8, 10, 12, 14 and 17mm T-Handles for me. They are my go to’s for almost everything on the bike. By far my favorite tools in my toolbox.
6
FWYT
Profile picture for user FWYT
Posts
3558
Joined
5/25/2014
Location
San Diego, CA, USA
FWYT 4/18/2020 11:59pm
4/18/2020 11:59pm
I made a 4-way that has an 8, 10 and 12 and then the fourth is a male 3/8 drive receiver for whatever else. I use that for everything; it has replaced all my T-handles. It frigging rules.
5
Rotaholic
Profile picture for user Rotaholic
Posts
1753
Joined
4/2/2013
Location
NZ
Rotaholic 4/19/2020 12:24am
4/19/2020 12:24am
3/8 T Handle that I can swap the sockets on is perfect, normally have 8/10/12mm. Love that tool
2
headlightracer 4/19/2020 1:01am
4/19/2020 1:01am
Rotaholic wrote:
3/8 T Handle that I can swap the sockets on is perfect, normally have 8/10/12mm. Love that tool
That's also for me the way to go. Can swap the sockets between the ratchet and the t handle.
CG118
Profile picture for user CG118
Posts
653
Joined
6/27/2014
Location
Kennesaw, GA, USA
CG118 4/19/2020 2:02am
4/19/2020 2:02am
FWYT wrote:
I made a 4-way that has an 8, 10 and 12 and then the fourth is a male 3/8 drive receiver for whatever else. I use...
I made a 4-way that has an 8, 10 and 12 and then the fourth is a male 3/8 drive receiver for whatever else. I use that for everything; it has replaced all my T-handles. It frigging rules.
Pic?
Riesenberg448 4/19/2020 2:34am
4/19/2020 2:34am
If I have them at my home shop easy to grab, always the right T first, if at the track, I have an old ASV "Y-Handle" with sockets and if I need something other than those 3 I go into the box for a wrench or ratchet based on the location and need.

If I had a permanent trailer with mounted/easy to find location, I'd always just use the T or Y handle.
Boomslang 4/19/2020 3:00am
4/19/2020 3:00am
Micahdogg wrote:
Thats all. Just wondering if you use t-handles or 8, 10, 12 mm sockets.
Probably the most used tools of any reputable mechanic.

Pit Row

See All »
shuggs
Profile picture for user shuggs
Posts
1826
Joined
8/6/2008
Location
Dunfermline, GB
shuggs 4/19/2020 3:16am
4/19/2020 3:16am
T handles for most things, like this set just bought

cwel11
Profile picture for user cwel11
Posts
2741
Joined
12/4/2019
Location
Orangeville, PA, USA
cwel11 4/19/2020 4:10am
4/19/2020 4:10am
Motion pro T handles at home and a shorter (tusk I think) set for in my track box
1
wwdiii
Profile picture for user wwdiii
Posts
2579
Joined
4/15/2019
Location
League City, TX, USA
wwdiii 4/19/2020 5:27am
4/19/2020 5:27am
I have a tee Handle ratchet, it’s handy.
dfr136 4/19/2020 5:41am
4/19/2020 5:41am


I have had one of these since like 2004. I can almost take apart my whole bike with this with an 8,10,12 on it.
5
Paw Paw 271
Profile picture for user Paw Paw 271
Posts
3632
Joined
4/3/2013
Location
Benton, LA, USA
Paw Paw 271 4/19/2020 5:45am
4/19/2020 5:45am
T handles all the way.

Paw Paw
1983YZ125
Profile picture for user 1983YZ125
Posts
383
Joined
2/18/2018
Location
Gulf Shores, AL, USA
1983YZ125 4/19/2020 5:48am
4/19/2020 5:48am
I recently had to kill $8 to get free shipping so i wouldn't spend $15, website i was buying parts from was very limited so i found a 1/4" drive MP T-handle. Figured this will be lighter to carry in my trail pouch than a ratchet....It is not Laughing

Been wanting one regardless for plastic bolts and what not so not all a loss, but a bit disappointed as i've been trying to get my trail tool kit built back up.
dirtwalker 4/19/2020 5:57am
4/19/2020 5:57am
I always us a 5/16” instead of 8mm. Fits snugger and reduces wear over time.
3
SEE ARE125 4/19/2020 6:01am
4/19/2020 6:01am
I have the best of both. My wife picked up an extendable, ratcheting T-handle with interchangeable sockets as a stocking stuffer one year. Made by Skil and it’s handy as hell. Came in a little box with several sockets, hex heads, torx bits, and multiple Phillips and flat heads. Only thing is the sockets it came with are SAE, so I have to carry some 1/4” drive metric sockets.

Retracted:


Extended:



1
BobPA
Profile picture for user BobPA
Posts
8334
Joined
10/31/2013
Location
USA
BobPA 4/19/2020 6:18am
4/19/2020 6:18am
Most of the time I use a ratchet and extension. T-handles when I remember that I have them. Got a 1/4" and 3/8" drive Motion Pro setup in my track box. I think a ratchet is better all around..
1
KMC440
Profile picture for user KMC440
Posts
7764
Joined
4/1/2008
Location
USA
KMC440 4/19/2020 6:26am
4/19/2020 6:26am
SEE ARE125 wrote:
I have the best of both. My wife picked up an extendable, ratcheting T-handle with interchangeable sockets as a stocking stuffer one year. Made by Skil...
I have the best of both. My wife picked up an extendable, ratcheting T-handle with interchangeable sockets as a stocking stuffer one year. Made by Skil and it’s handy as hell. Came in a little box with several sockets, hex heads, torx bits, and multiple Phillips and flat heads. Only thing is the sockets it came with are SAE, so I have to carry some 1/4” drive metric sockets.

Retracted:


Extended:



Daymm that's sexy !

How is the torque it can handle extended?
Husky Cat
Profile picture for user Husky Cat
Posts
5
Joined
1/29/2020
Location
Shawnee Mission, KS, USA
Husky Cat 4/19/2020 6:28am
4/19/2020 6:28am
T handles for 8 and 10mm also with rare earth magnets glued in to hold bolts. No dropped bolts!
2
DynoDan22
Profile picture for user DynoDan22
Posts
769
Joined
9/7/2011
Location
Victorville, CA, USA
DynoDan22 4/19/2020 6:53am
4/19/2020 6:53am
Gotta have both T-handles and sockets. I use T-handles mostly for plastic and disassembly. For assembly I use sockets/torque wrench but still use T handles for all M5 or M6 fasteners for plastics etc.
2

Post a reply to: Do you use t-handles?