Recent Activity
All
HackMan162 Added a reply to Powder Coated Frames
3/8/2016 8:41am I've got a couple more questions...are you guys doing a clear powder coat over the color coat? Are you masking bolt holes, or just chasing them when you get it back? And, what is the yellow color code everyone is using on those cool yellow RM frames?
More »
HackMan162 Added a reply to 2004 RM250 built
3/4/2016 7:07am No, you don't really know much. If I had the $3600 scratch, I would jump on this in a heartbeat. I would swap my non-Akit onto the bike, and sell it for close to $3000 here in Texas very quickly. Then I would have an Akit for $600.
HackMan162 Added a reply to New post made I didn't kno I made that big mistake
3/2/2016 7:54am I think replacing the power band with the elusive purple one from the 1991? RMZ125 would help a lot. It also helps if you go up one spring rate on the piston return spring. I guarantee you will kick that YZ250's arse if you do these mods.
HackMan162 Added a reply to 81-82 RM 125s
2/23/2016 8:40am $800 in that condition, with the Ohlins shock? Dayum! Big score!
HackMan162 Added a reply to Got Our Suspension Back And!
2/23/2016 6:58am Kind of gives me a chubbie!
HackMan162 Added a reply to Preferred ACL reconstruction in our community?
2/18/2016 8:19am Do you have out of network coverage? Doc Mark isnt a preferred provider on my insurance either, but the difference between in-network and out of network, is only 10%, as well as a higher deductible. Call Mike in his office to discuss your situation.
HackMan162 Added a reply to re anodize forks uppers
2/10/2016 1:52pm So any idea what the ano color code is?
HackMan162 Added a reply to re anodize forks uppers
2/10/2016 12:50pm Hard to tell for sure in the pic...are those ano'd Flo yellow, like the Suzuki Factory team forks and wheels? Or is it gold? If it's the yellow, do you know which dye color they used?
HackMan162 Added a reply to Best Tire Deals?
1/31/2016 2:15pm Can you send them back? Scariest front tire ever made, in my opinion. Epic fail by Dunlop.
HackMan162 Added a reply to Cycle Ranch Closing?
1/25/2016 8:28am The track was awesome on Saturday. Turnout was very good. Was quite crowded. Perfect weather, perfect track conditions!
HackMan162 Added a reply to Best looking MX gear line of all time
1/18/2016 9:31am Pretty sure I have an old set of those in a box somewhere...
HackMan162 Added a reply to Texas is on a roll! More tracks!
1/13/2016 2:20pm You guys in H-Town are lucky. We need another track in the mix in the Austin area...hopefully soon
HackMan162 Added a reply to WTB 2007-2008 RM250 Frame
1/13/2016 7:54am Oh, okay. Was hoping not something catastrophic! You like the 07-08 better than 06?
HackMan162 Added a reply to WTB 2007-2008 RM250 Frame
1/12/2016 7:48am ruh-roh. What happened?
HackMan162 Added a reply to Gearbox Porn
1/11/2016 4:44pm I think you failed to see my humor. I agree. Well worth it.
HackMan162 Added a reply to Gearbox Porn
1/11/2016 3:58pm
HackMan162 Added a reply to RMZ to RM fender swap
1/9/2016 1:09pm You drill new holes through the angle. It's not too difficult. Just carefully mark where to drill using your old fender. Or, you could get creative. One guy here gab'd a bracket. Another guy pressed the plastic plat or something, I havent seen a pic of that.
HackMan162 Added a reply to RM Hubs
1/6/2016 5:55am Thanks for the info dbrunski. I may have a set of hubs done then.
HackMan162 Added a reply to San Antonio, Where to ride now that Cycle Ranch is closing?
1/5/2016 3:28pm Yeah, I have heard the Seguin rumor too. Also, Johnson City MX COULD happen, but it's politcal BS right now. I have ridden on the property, and it has the potential to be the best in Texas, bar none. It has hills, and some pretty steep!
HackMan162 Added a reply to RM Hubs
1/5/2016 3:01pm I know Vince over at FasterUSA says NOT to turn down the RM hubs. They have had too many failures, because on the RMs specifically, there just isn't much material left afterwards.