All

I tried the stock muffler with one screen removed and it may have made a little difference. I didn’t remove the deeper (2nd) screen. Then my T6 pipe came in. The screenless air filter cage seemed to help throttle response. The T6 pro circuit pipe made a big difference.. I’ve also tried both the 50T and 51T sprockets. My thought is if you’re running the stock muffler with or without screens the 51T sprocket is the better choice. However, with the T6 I think I’m going back to the 50T with the stock 120/80 rear tire. 51T if I run...

Loctite this bolt. I’ve heard of a couple people having it fall out and lose the chain slider.

I tried to get this answer several pages ago, but I couldn’t, so I just bit the bullet. I went with the T-6 to save a few bucks and because it was available immediately. I’m very happy with the performance, but I never even rode the bike without it.

I ordered a DT1 filter to check the fitment with our domed air filter cage. I have always been a fan of the neoprene lip they use. Fit our cage great, and I’ll tell you if anyone is worried about sealing issues at all, this filter you would never have to worry. It fits so snug into the airbox with the neoprene lip it puts lots of pressure on the metal clips to hold the filter cage super tight to the air box. The neoprene doesn’t fold or move like the lip on a stock filter or Twin Air. Twin...

I would swap springs. My suspension guy is going to install.52's in mine just like my 22. I'm at the track now and I dropped my forks flush, bike still carves nicely, going to leave them. I did like MXA and turned in the high speed and damnit it's so much better. I didn't realize how bad it was wallowing.

I took my first ride on my new bike last night and came away very impressed. Prior to even starting the bike, I did quite a bit to it to get it ready. 1)Greased everything, 2)torqued the spokes, 3)oiled the air filter, 4)tossed the stock exhaust and installed a PC T-6, 5)programmed in the Tickle map, 6)pulled the rubber plug from the airbox and tore the foam off the back side of the left number plate, 7)went from the stock 5.5 to a 6.0 shock spring, 8)took off the fork caps and added 50ml of oil to each fork, 9)took...

I installed a Gold Valve kit in my 2019 to improve the hold up of the forks. I added 50ml of oil to each fork yesterday. I’ll be taking the bike out for the first ride tomorrow afternoon. I can’t wait to try it!

I had a PC pipe and silencer on order anyway, so I tried removing the baffle and screens last night. I was able to cut the baffles out, but couldn’t figure out how to remove the screens, so the whole muffler got tossed in the trash. I took my 25% off coupon to Harbor Freight and picked up the swivel sockets I’ll need to change out the head pipe. FedEx just notified me that my package from PC will get dropped off today. I have everything greased, put on my heavier shock spring last night and added 50ml of oil...