A little help in Sacramento?

Related:
Insta Hub
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/3/2020 2:01pm
12/3/2020 2:01pm
Wingalls wrote:
Had some RM Cash burning a hole in my pocket. He has some red/black Acerbis handgaurds on the way!

Cheers,
Wingalls
Those will be very useful the first time he goes up Big Moe at Hangtown!

Hammer
6
Whymee 12/3/2020 3:27pm
12/3/2020 3:27pm
The Matrix toolbox ought to show up on Friday.

Curious: Is Mayson a member here? If he is not, encourage him to join!

Good job everyone!!
10
kaiguy702
Profile picture for user kaiguy702
Posts
38
Joined
2/5/2016
Location
North Las Vegas, NV, USA
kaiguy702 12/3/2020 4:00pm
12/3/2020 4:00pm
Hammer 663s wrote:
I know a kid lives out near Placerville. He's been my boy's best friend since they were 5. Mayson is 14 and just got a well-used...
I know a kid lives out near Placerville. He's been my boy's best friend since they were 5. Mayson is 14 and just got a well-used CRF150r. They don't have a ton of $$$. Anyone in the Sac area want to help me give his suspension a rebuild? Both ends need seals, oil, probably bushings. I'll pay for the parts.

Hammer 663s
Just finishing my day at work and read through the majority of this thread... once I read about his parents and what he's been through the tears started rolling, no lie. Anyway its so awesome to see such good especially during these strange times; this really made my day!

P.S.- I sent a little PayPal your way Hammer.

Dirt bikes are neat.

Kai
10
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/3/2020 7:03pm
12/3/2020 7:03pm
Mayson had to pick up his room a bit since the pile is starting to take over.



Hammer
30

The Shop

See All »
Motoxdoc
Profile picture for user Motoxdoc
Posts
2712
Joined
11/8/2009
Location
Steamboat Springs, CO, USA
Motoxdoc 12/3/2020 7:11pm
12/3/2020 7:11pm
This thread is still delivering....literally!! Everytime I check on this thread my eyes well up with tears of happiness for Mayson! Handguards and a toolbox just in the few posts on this page....you guys people rock!
12
Brownie281 12/3/2020 10:32pm
12/3/2020 10:32pm
Wow.. just wow. What an absolutely amazing group of people. With everything that gone on this year, and in this young mans life it’s been fair to say 2020 has been a year to be forgotten, but I can say honestly for myself and likely many others that reading all these awesome messages and seeing the photos were what WE needed. You should all be so proud of yourselves and showing this young man that good people exist and are all around. I grew up with a little sister who was put through the operating room 30 times for brain surgery and came out a miracle from people in our community who selflessly donated so much so my family could afford to take her to the mayo clinic. Empathy, kindness and compassion are truly the things that allowed her to become the human she did, and you all are cut from that very same cloth. That same community. I had tears in my eyes reading as well and am going to wake my wife up in the morning to get her take on what we could send to help out this young mans motorcycle adventure. Your all truly amazing people, especially you Hammer. Best thread ever.
14
Troy
Profile picture for user Troy
Posts
82
Joined
5/17/2007
Location
Draper, UT, USA
Troy 12/4/2020 7:21am
12/4/2020 7:21am
RM says it should arrive by 12/8.
16
omalley
Profile picture for user omalley
Posts
1528
Joined
7/27/2016
Location
Snohomish, WA, USA
omalley 12/4/2020 7:22am
12/4/2020 7:22am
Brownie281 wrote:
Wow.. just wow. What an absolutely amazing group of people. With everything that gone on this year, and in this young mans life it’s been fair...
Wow.. just wow. What an absolutely amazing group of people. With everything that gone on this year, and in this young mans life it’s been fair to say 2020 has been a year to be forgotten, but I can say honestly for myself and likely many others that reading all these awesome messages and seeing the photos were what WE needed. You should all be so proud of yourselves and showing this young man that good people exist and are all around. I grew up with a little sister who was put through the operating room 30 times for brain surgery and came out a miracle from people in our community who selflessly donated so much so my family could afford to take her to the mayo clinic. Empathy, kindness and compassion are truly the things that allowed her to become the human she did, and you all are cut from that very same cloth. That same community. I had tears in my eyes reading as well and am going to wake my wife up in the morning to get her take on what we could send to help out this young mans motorcycle adventure. Your all truly amazing people, especially you Hammer. Best thread ever.
Great post. It occurred to me today that Mayson isn’t the only one benefiting from this...I think everyone here is, too.

Although I am obviously using it myself, I have typically been critical of the internet and social media...but this thread has reminded me that like so many other things, it’s how it’s used that matters.

This young man and this thread are a testament to just how great motocross can be.

16
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 8:36am
12/4/2020 8:36am
Time to update the list again. Come on Vitards, you got this!!!!

Mayson is 5'7" and 120.
30 pant, medium jersey, medium glove
10 boot
Helmet size Medium
Prefers red & black color theme.

Bike is 07 CRF150r Expert (big wheel)

Cash in hand - $2050 total
Suspension service - Slipdog and others
Levers - Tim 969v
Boots Tech 7s - onefiveeight
Air filters - JTM
Grips - Motosport
Gear set - larryloupout
TP199 knee guards, socks, shirt - Wyatt
Plastics/Graphics - omalley & Decal Works!
Goggle set - Justin
Chain & Sprockets - Moto849TD
Seat cover - Nathaniel129
Maxima chain kit - SlowGTI
Hand tools - DCMX & Tools: Dan the Tool Man
Wrench set - BigBoreFan58
Neck Brace - AHarmon237
Honda Hoodie - BudLong82
Kenda tires, new tubes, and fresh brake pads - Chris Walent
Thor Helmet - Titanium
Maxima chain kit and tie downs - CaptMoto
Track chairs & bike stand - slowGTI
Bars and barpad - Seth505
2 pair TLD gloves - TeamGreen
RacerX subscription - Dimblewambie
Oils/Lubes - cwolf96
Fork Guards w/graphics & Tusk shift/brake levers - Hammer 663s
Bling - Works Connection
X Brand Goggles and WTS Swag - David Pingree (Ping 101)
Funnel and clutch/throttle cables - MXRacer816
Craftsman 3/8" Torque wrench - AJ565
CRF150rb shop manual - AHRMA361 -
Case Honda engine AND trans oil - Phoenix Racing Honda
Matrix Toolbox - Whymee
Training vids and books - bigmaico
Acerbis hand guards - Wingalls
Moto casual wear - Troy

KTM race rig tour @ Hangtown 2021 - courtesy of Mag23 & the Vohlands!


Hammer 663s
5
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 10:09am
12/4/2020 10:09am Edited Date/Time 12/4/2020 10:10am
Slipdog is checking out the bike. Needs a new rear rotor so I used PayPal funds to order a fresh set front and rear.

Plus fresh disk and SPROCKET BOLTS - Torque them right Mayson!

Hammer 663s
7
Ryan625
Profile picture for user Ryan625
Posts
1689
Joined
9/14/2019
Location
Lynnwood, WA, USA
Ryan625 12/4/2020 10:20am
12/4/2020 10:20am
Hammer 663s wrote:
Slipdog is checking out the bike. Needs a new rear rotor so I used PayPal funds to order a fresh set front and rear. Plus fresh...
Slipdog is checking out the bike. Needs a new rear rotor so I used PayPal funds to order a fresh set front and rear.

Plus fresh disk and SPROCKET BOLTS - Torque them right Mayson!

Hammer 663s
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state of the bike. I am really excited to see this thing get built!!

Hammer, what are your thoughts on doing a build thread!?
2
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 11:24am
12/4/2020 11:24am
Ryan625 wrote:
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state...
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state of the bike. I am really excited to see this thing get built!!

Hammer, what are your thoughts on doing a build thread!?
He hasn't really dug into it yet. He's got some suspension due out before the weekend. He did say at first look it's in really decent condition for an 07. Rear rotor bent, headset a little notchy. I expect he will find dry bearings there, maybe recoverable with some cleaning and a re-grease. I'd bet he find the same in the linkage and swingarm, but those are usually not recoverable and we might need to do all new bearings there. I'm sure all the fluids need replaced.

As far as a build thread, I think we could do that if someone local (and there are a couple offers) wants to lead it with Mayson. It's a great opportunity to let him use his new tools to install all these new parts and gain experience and pride.

Hammer 663s
3
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 12:07pm
12/4/2020 12:07pm
Ryan625 wrote:
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state...
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state of the bike. I am really excited to see this thing get built!!

Hammer, what are your thoughts on doing a build thread!?
Hammer 663s wrote:
He hasn't really dug into it yet. He's got some suspension due out before the weekend. He did say at first look it's in really decent...
He hasn't really dug into it yet. He's got some suspension due out before the weekend. He did say at first look it's in really decent condition for an 07. Rear rotor bent, headset a little notchy. I expect he will find dry bearings there, maybe recoverable with some cleaning and a re-grease. I'd bet he find the same in the linkage and swingarm, but those are usually not recoverable and we might need to do all new bearings there. I'm sure all the fluids need replaced.

As far as a build thread, I think we could do that if someone local (and there are a couple offers) wants to lead it with Mayson. It's a great opportunity to let him use his new tools to install all these new parts and gain experience and pride.

Hammer 663s
Well that escalated quickly. An OTHG buddy in Sac will help Mayson do a full strip of the bike. This gentleman happens to own a commercial vehicle paint business, so I think we will see a freshly painted frame in the near future, and a build that uses the tools and parts you all have so generously supplied! Photos will be taken!

Mayson will help on the tear-down and build. He will learn quite a bit I believe.

I haven't seen a good air pressure gauge and a tire pump on the list. Hint hint.......

Hammer 663s

8
1
spimx
Profile picture for user spimx
Posts
1314
Joined
3/25/2019
Location
Port Isabel, TX, USA
spimx 12/4/2020 12:14pm
12/4/2020 12:14pm
Vital needs to make a video with this kid
8
2
Nathaniel129 12/4/2020 12:31pm
12/4/2020 12:31pm Edited Date/Time 12/4/2020 12:36pm
Ryan625 wrote:
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state...
Is it possible for Slipdog to post an update of what all he finds on the bike under disassembly? I am curious of the true state of the bike. I am really excited to see this thing get built!!

Hammer, what are your thoughts on doing a build thread!?
Hammer 663s wrote:
He hasn't really dug into it yet. He's got some suspension due out before the weekend. He did say at first look it's in really decent...
He hasn't really dug into it yet. He's got some suspension due out before the weekend. He did say at first look it's in really decent condition for an 07. Rear rotor bent, headset a little notchy. I expect he will find dry bearings there, maybe recoverable with some cleaning and a re-grease. I'd bet he find the same in the linkage and swingarm, but those are usually not recoverable and we might need to do all new bearings there. I'm sure all the fluids need replaced.

As far as a build thread, I think we could do that if someone local (and there are a couple offers) wants to lead it with Mayson. It's a great opportunity to let him use his new tools to install all these new parts and gain experience and pride.

Hammer 663s
Hammer 663s wrote:
Well that escalated quickly. An OTHG buddy in Sac will help Mayson do a full strip of the bike. This gentleman happens to own a commercial...
Well that escalated quickly. An OTHG buddy in Sac will help Mayson do a full strip of the bike. This gentleman happens to own a commercial vehicle paint business, so I think we will see a freshly painted frame in the near future, and a build that uses the tools and parts you all have so generously supplied! Photos will be taken!

Mayson will help on the tear-down and build. He will learn quite a bit I believe.

I haven't seen a good air pressure gauge and a tire pump on the list. Hint hint.......

Hammer 663s

Nice! Pretty sure I know who that guy is, he's good people. Helped a lot of amateurs back in my day, right? Early 2000's.
1
AHRMA361 12/4/2020 12:40pm
12/4/2020 12:40pm
Hammer 663s wrote:
Well that escalated quickly. An OTHG buddy in Sac will help Mayson do a full strip of the bike. This gentleman happens to own a commercial...
Well that escalated quickly. An OTHG buddy in Sac will help Mayson do a full strip of the bike. This gentleman happens to own a commercial vehicle paint business, so I think we will see a freshly painted frame in the near future, and a build that uses the tools and parts you all have so generously supplied! Photos will be taken!

Mayson will help on the tear-down and build. He will learn quite a bit I believe.

I haven't seen a good air pressure gauge and a tire pump on the list. Hint hint.......

Hammer 663s

That's so awesome! Many thanks to the OTHG guy!

That repair manual better have lots of greasy fingerprints on its pages Mayson!!
2
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 12:54pm
12/4/2020 12:54pm Edited Date/Time 12/4/2020 12:56pm
I'll suggest 2 items. One small, one for someone with deeper pockets.

VP Fuel jug. Everyone needs one.

Set of Tusk wheels. He's got new tubes and tires, sprockets, chain, rotors, and bolts coming. Wheels aren't cheap, but man would a set of black rims with red hubs look bitchin, especially with a fresh red frame and new plastics/graphics! Hey Rocky Mountain - help us out!


Hammer
4
2

Pit Row

See All »
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 1:16pm
12/4/2020 1:16pm
Look at that guys - we got pinned top of the board!

Hammer
10
1
NorCalMXDad
Profile picture for user NorCalMXDad
Posts
24
Joined
11/11/2020
Location
Wheatland, CA, USA
NorCalMXDad 12/4/2020 2:37pm
12/4/2020 2:37pm
McIntosh family has a VP fuel jug on the way to Mayson
11
JTM5427
Profile picture for user JTM5427
Posts
184
Joined
11/10/2017
Location
Pittsburgh, PA, USA
JTM5427 12/4/2020 2:59pm
12/4/2020 2:59pm
Hammer 663s wrote:
I'll suggest 2 items. One small, one for someone with deeper pockets. VP Fuel jug. Everyone needs one. Set of Tusk wheels. He's got new tubes...
I'll suggest 2 items. One small, one for someone with deeper pockets.

VP Fuel jug. Everyone needs one.

Set of Tusk wheels. He's got new tubes and tires, sprockets, chain, rotors, and bolts coming. Wheels aren't cheap, but man would a set of black rims with red hubs look bitchin, especially with a fresh red frame and new plastics/graphics! Hey Rocky Mountain - help us out!


Hammer
I have a contact at RM. Let me see if I can pull some strings and see what they can do!
7
Ryan625
Profile picture for user Ryan625
Posts
1689
Joined
9/14/2019
Location
Lynnwood, WA, USA
Ryan625 12/4/2020 6:36pm
12/4/2020 6:36pm
Hammer 663s wrote:
I'll suggest 2 items. One small, one for someone with deeper pockets. VP Fuel jug. Everyone needs one. Set of Tusk wheels. He's got new tubes...
I'll suggest 2 items. One small, one for someone with deeper pockets.

VP Fuel jug. Everyone needs one.

Set of Tusk wheels. He's got new tubes and tires, sprockets, chain, rotors, and bolts coming. Wheels aren't cheap, but man would a set of black rims with red hubs look bitchin, especially with a fresh red frame and new plastics/graphics! Hey Rocky Mountain - help us out!


Hammer
JTM5427 wrote:
I have a contact at RM. Let me see if I can pull some strings and see what they can do!
I’d be willing to donate a bit to the wheels. Who doesn’t love red hubs!?
2
slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog 12/4/2020 7:34pm
12/4/2020 7:34pm
Sorry I haven't checked in sooner but it's been a busy week for me. For its age, Mayson's bike is in pretty good condition. I pulled off the front end today and the steering bearings were dry and rusty, especially the lower. I wiped them down, ran some fine Emory around the races, and put some fresh grease on them but they are still notchy and need to be replaced. I will check out the swingarm/linkage when I tear the rear apart but like the front end, I'd assume they've never seen anything but the OEM grease. I will also pop off the tank and valve cover and see how the clearances are looking.

Mayson's grandpa Rick is a really nice guy and seems really blown away and appreciative of all the help that is being offered. We spoke for about an hour when he dropped off the bike and he has a cool background and ties to the sport himself.

18
Hammer 663s
Profile picture for user Hammer 663s
Posts
3115
Joined
6/2/2016
Location
None, AE, USA
Hammer 663s 12/4/2020 7:48pm
12/4/2020 7:48pm
slipdog wrote:
Sorry I haven't checked in sooner but it's been a busy week for me. For its age, Mayson's bike is in pretty good condition. I pulled...
Sorry I haven't checked in sooner but it's been a busy week for me. For its age, Mayson's bike is in pretty good condition. I pulled off the front end today and the steering bearings were dry and rusty, especially the lower. I wiped them down, ran some fine Emory around the races, and put some fresh grease on them but they are still notchy and need to be replaced. I will check out the swingarm/linkage when I tear the rear apart but like the front end, I'd assume they've never seen anything but the OEM grease. I will also pop off the tank and valve cover and see how the clearances are looking.

Mayson's grandpa Rick is a really nice guy and seems really blown away and appreciative of all the help that is being offered. We spoke for about an hour when he dropped off the bike and he has a cool background and ties to the sport himself.

Thanks Slipdog! Rick and Mayson's Dad spent quite a bit of time with me and my boy over the years building our tracks, watching Super/Motocross, going to Hangtown, and more. He and his wife are good people. If they run Hangtown this year I am coming down for it come hell or high water.

Let me know what you need and I will order the parts for delivery to you. Maybe we leave it all stripped down and do the frame paint before it goes back together. Especially considering there are races to be pounded out of the head tube.

Hammer 663s
6
LungButter
Profile picture for user LungButter
Posts
8684
Joined
1/9/2016
Location
Yellow Pine, ID, USA
LungButter 12/5/2020 7:58am
12/5/2020 7:58am
Wow, this is not what I expected when I clicked on this thread. Pretty unbelievable.

I'm gonna dig around in the garage this weekend and send a few "consumables" Mayson's way to help him keep riding down the road. Not sure what it will be yet, but it will all be new/unopened and stuff he'll be able to use.

Good job Hammer and good job Vital.

7
Chance1216
Profile picture for user Chance1216
Posts
8976
Joined
4/1/2018
Location
Carson, CA, USA
Chance1216 12/5/2020 10:18am
12/5/2020 10:18am Edited Date/Time 12/5/2020 10:30am
Hammer, your kindness reminds me of family friend I’ve known since I was a kid. I lived with my grandparents and he lived across the street from us. He was like a dad to me. He taught me a lot through his example. He left California and moved to Portland when I was 12.
When I left California for the PNW @ 20, he was the first person I looked up. We’ve been friends/family for over 37 years.
I’m sure Mayson will remember what you and everyone else involved has done the rest of his life.
Happy holidays to you and your family.
9
NITRODOG
Profile picture for user NITRODOG
Posts
450
Joined
3/25/2010
Location
TEMECULA, CA, USA
NITRODOG 12/5/2020 11:02am
12/5/2020 11:02am
Just sent another $25 via Venmo, pitch in Guys! even if you can only afford $5 or $10 it goes a long ways! Let's make sure he has his gate fee/practice/gas/lunch money to go riding!
5
Radical
Profile picture for user Radical
Posts
2939
Joined
10/20/2012
Location
San Diego, CA, USA
Radical 12/5/2020 11:30am
12/5/2020 11:30am
yak651 wrote:
Was thinking the exact thing but didn’t want to wreck the vibe of this awesome thread pointing it out. Ignore it, always have to be that...
Was thinking the exact thing but didn’t want to wreck the vibe of this awesome thread pointing it out. Ignore it, always have to be that one person...
Hammer 663s wrote:
Yeah you are right. Worn out after 20 gate drops over 2 days, and with a couple of beers in me, my inner keyboard warrior came...
Yeah you are right. Worn out after 20 gate drops over 2 days, and with a couple of beers in me, my inner keyboard warrior came out. Wink It’s been a great thread so far full of positive vibes!!!!

Hammer
omalley wrote:
I’m hoping (big stretch, but maybe...) that he just did a crappy job of expressing his support. But the way it reads, it’s hard to say.
I agree. My interpretation is that he thinks it's awesome that we're doing this. Doesn't understand how a request for servicing suspension turned into something this incredible, and hopes we do this again.

Let's give people the benefit of the doubt, and keep things positive!

Merry Christmas everyone!
Radical
2
Radical
Profile picture for user Radical
Posts
2939
Joined
10/20/2012
Location
San Diego, CA, USA
Radical 12/5/2020 12:05pm
12/5/2020 12:05pm Edited Date/Time 12/5/2020 1:02pm
Mayson has a Joe's Racing 0-60psi Tire pressure gauge (same model I use) and a set of Motion Pro tire irons (08-0049) on the way!
I already had these in the cart when I saw he doesn't have a tire pressure gauge Smile .

Update: These and the tire pump will arrive next week.
3
Radical
Profile picture for user Radical
Posts
2939
Joined
10/20/2012
Location
San Diego, CA, USA
Radical 12/5/2020 12:15pm
12/5/2020 12:15pm
Tire Pump on the way too.
3

Post a reply to: A little help in Sacramento?