Added reply in a thread Disappointed with Mad Skills Mx3 1/4/2021 9:14 PM

Is it out? Heard a bunch about it awhile back, then crickets...

Added reply in a thread Pete Fox new company 1/4/2021 7:01 PM

Added reply in a thread Twisted tea knock out 1/4/2021 10:11 AM

From FB Marketplace...lol

Added reply in a thread HRC spec powervalve spacer 1/4/2021 9:55 AM

No worries. I’m going to have to dust the brain off really good on this one, but I believe that part of the function is that the chamber only has access to exhaust gases in a certain phase of PV movement and/or at one end of the RPM range. Thus giving ... more »

Added reply in a thread Yz 490 transmission help 1/4/2021 7:37 AM

Had this on my 78 CR250....would’ve sworn all bearings were seated. Turned out one had caught the edge of the case (probably didn’t heat enough) and a small burr rolled up to the point that the bearing wasn’t totally bottomed out in the blind hole. I ... more »

Added reply in a thread HRC spec powervalve spacer 1/3/2021 7:25 PM

It’s been forever since my last 92-01 CR250R ownership...that said, as I recall, it tricks the engine into thinking it has more pipe volume than it does.

Added reply in a thread Varner Motorsports issues 1/3/2021 1:42 PM

Maybe he meant July

laughing
Added reply in a thread Varner Motorsports issues 1/3/2021 7:23 AM

Missed those, apparently....cliff notes?

Added reply in a thread Varner Motorsports issues 1/1/2021 2:40 PM

That’s funny. So can I. I used Tom Morgan. Great work, great service, nice guy, and to my knowledge, never the subject of one of these threads. These threads have popped up regarding Harris, Gorr, and Varner. Multiple disappointments, multiple shafted ... more »

Added reply in a thread Varner Motorsports issues 1/1/2021 2:34 PM

Good cast lol

Added reply in a thread Varner Motorsports issues 1/1/2021 2:05 PM

MySpace? Is that on that newfangled info highway thing?

Added reply in a thread Varner Motorsports issues 1/1/2021 2:02 PM

Most likely, the closest he’s been to a YZ250 is when he rides past his local Yamaha dealer on his Chinese dual-sport from Pep Boys.

Added reply in a thread Varner Motorsports issues 12/31/2020 5:03 PM

Terry, is that you?

Added reply in a thread Varner Motorsports issues 12/30/2020 8:33 PM

Yep...Eric or Mike I think it was. Did a motor for at least one friend of mine, and it ripped. As I recall, he worked for or out of Brothers Honda?

Added reply in a thread Varner Motorsports issues 12/30/2020 2:05 PM

His family was waiting for a response. Yes or no. Only on the internet would a guy trying to help someone he’s never met be criticized for being helpful. Who pissed in your wheaties this morning?

Added reply in a thread Varner Motorsports issues 12/30/2020 2:02 PM

There was a similar thread about EG on here awhile back.... Honestly, send stuff to TMR and live happily ever after. No fuss, just solid work, at a fair price, from a nice guy who gives a shit about his customers. What a concept.

Added reply in a thread Rockstar leaving? 12/28/2020 12:54 PM

Swipe Right Motorsports...

Added reply in a thread Question for engine builders - 2018 KX450f 12/28/2020 12:26 PM

I’m a semi-fat over 40 B/C rider, so take this for what it’s worth. On my ‘18 I did a PC T-6 full system and a remap from Tokyo Mods-otherwise stock. The pipe and remap totally filled in the soft spots, and that’s with a pump gas tune. I’m guessing a ... more »

Added reply in a thread Rockstar leaving? 12/27/2020 6:57 PM

While I despise energy drinks and the fact that so many people (especially kids) are hooked on the swill, the reality is that you can kiss pro MX/SX goodbye without them.

Added reply in a thread Unexpected Christmas morning surprise (wallet speaking style) 12/25/2020 10:31 AM

Used to have that problem. Cost me 50% of my stuff to solve it, but it was worth it, lol