Added reply in a thread New Garage- Must have tools? 4/28/2020 5:10 PM

Thought I would update: Day 2 of framing, cant wait to get it finished to start tinkering

Started new thread Anybody got a Generac Pressure washer? 4/7/2020 6:45 PM

Considering the 6024 or 6692, 3100PSI, 2.7GPM. $319... I know nothing about it, says it has an axial cam pump. is that good or bad?

This forum thread has 6 replies

Added reply in a thread My gun of the month 4/6/2020 8:33 PM

I just put together a nice budget friendly 10/22 build. Cant wait to zero it in and take care of some critters

Added reply in a thread Electric powerwashers: junk? 3/29/2020 8:41 PM

can electric clean concrete?

Added reply in a thread The best moto of your life. 3/14/2020 6:50 PM

I used to love racing at my local track on Saturday nights. I always won practice when they had open practice days

Added reply in a thread New Garage- Must have tools? 2/9/2020 10:47 AM

I will post pics once I get some more progress. I used to do electrical work so I will definitely have lots of outlets and lights. Thinking i need to make sure my compressor hose is strategically located so i can also service my cars in other bays

Started new thread New Garage- Must have tools? 2/8/2020 8:37 PM

Already got the footers poured an block about 3/4 of the way done. Building an oversized 3 car garage, (38W x32D). I have one bay to use as a workshop/bike garage. What are the must haves for working on bikes? So far I know I am going to build a good ... more »

This forum thread has 25 replies

Added reply in a thread @PING 2/3/2020 7:13 PM

Hey Ping- Where can I get my hands on some primal impulse graphics from 2000? We are restoring a clapped out 2000 RM125 and want it to look like the team bike.

Added reply in a thread builder?? Wall support-block size 1/29/2020 6:55 PM

no, just a standard 6x8x12 conder block, not filled with mortar.

Started new thread builder?? Wall support-block size 1/28/2020 9:20 PM

Anybody ever use 6" block instead of 8 for non load bearing walls? opinions on using 6" vs 8 ?

This forum thread has 4 replies

Added reply in a thread Milky Oil?? KX80 1/27/2020 7:04 PM

replaced the bearing, but not the shaft..... guess that is next

Started new thread Milky Oil?? KX80 1/27/2020 6:11 PM

I have changed out the water pump seal twice. Is there another way coolant can leak into oil or do I just completely suck at putting in a seal? engine is completely rebuilt, new piston, bottom end, cylinder replated, etc.... every bearing and seal replaced. ... more »

This forum thread has 5 replies

Started new thread Nissin brake parts? 1/15/2020 6:19 PM

I need to rebuild my rear brakes on 89 KX80.is there a way to find Nissin part numbers to buy direct or online somewhere?

This forum thread has 3 replies

Started new thread 2016 KX250F FMF complete Titanium Exhaust RCT 12/29/2019 6:01 PM

Selling bike and not letting this go with bike. Exhaust in great shape. $500

This forum thread has 1 reply

Started new thread Crank install? 12/28/2019 6:45 PM

Got crankshaft installed, used the dry ice and heat method for the clutch side and crank puller on flywheel side. When I installed crank in right case half crank fell right into place perfectly. However, now that I have engine all together it looks like

... more »

This forum thread has 4 replies

Added reply in a thread Crank bearings- reinstall 12/22/2019 9:45 PM

Welp, had crank checked, got it back, put it back together and the damn thing is still binding up. #&#&×&×^# A!!! used cank pulling tool and everything

Added reply in a thread Crank bearings- reinstall 12/7/2019 3:17 PM

Should any machine shop be able to check the trueness?

Added reply in a thread Crank bearings- reinstall 12/4/2019 7:19 PM

I pulled it ack apart and put some calipers on it with it still in the clutch side case. everything appeared to line up, do these things really get knocked out of true that easily?

Added reply in a thread Crank bearings- reinstall 11/29/2019 1:16 PM

Really appreciate the tips guys, hoping I can get this finished over the weekend

Added reply in a thread Crank bearings- reinstall 11/28/2019 8:55 PM

I actually did that the for thebright side. I was struggling with getting transmission in so by the time I got to the left side the crank was not too cold. going to give it another shot tomorrow, will out the case in my electric smoker to heat it back ... more »