Goggles

7/24/2025 4:57pm Edited Date/Time 7/24/2025 4:57pm

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

1
JnDubZ
Posts
201
Joined
9/29/2022
Location
AU
7/24/2025 5:29pm
I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic. 

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

They are a bit pricey but honestly, I think Oakly airbrakes would suit you and be a comfortable fit. 

JnDubZ
Posts
201
Joined
9/29/2022
Location
AU
7/24/2025 5:52pm

What's Cairoli wear?

It's a brand called AVA. He used to run the 100% RACR goggles for ages. 

The Shop

chad_111
Posts
303
Joined
4/22/2016
Location
CA
7/24/2025 8:24pm

This is why I still run my 3 pairs of 12 year old Thor Hero goggles.  I stocked up on lenses and tear offs when they were clearing them out after discontinuing the goggles and am good for another couple years yet. 

2
CASH476
Posts
633
Joined
2/27/2009
Location
Perth, AU
7/24/2025 10:00pm
Surely if your goggles are moving that means you’re helmet is moving aswell? If you’re a bigger guy it might be a option to look at...

Surely if your goggles are moving that means you’re helmet is moving aswell? If you’re a bigger guy it might be a option to look at a premium fox helmet where you can customise the cheek pads etc to get the right fit, Also do you have the goggles strap adjusted properly, so that the foam makes a seal to your face? Another factor is that a premium goggle has a lot more flexibility to fit with the better quality foams. Through experience I was always a guy who was real picky about goggle fitment to the point I would check my strap adjustment on the line, this issue is obviously having a big impact on your riding experience otherwise you wouldn’t have posted. Perhaps find a local dealer who sells premium brands and spend some time tailoring a set up that suits you 

My helmet is a Fly Formula CP. The goggles definitely feel like they are squeezed in at the top hitting the helmet and it pushes down...

My helmet is a Fly Formula CP. The goggles definitely feel like they are squeezed in at the top hitting the helmet and it pushes down on my right nostril damn near closed 

I had a similar problem with a Formula CC. The helmet fit was great and was super comfortable but I could only use small framed goggles as it sat a bit lower than other helmets or the eyeport was a bit lower and even then they pushed down a little. Either way, it drove me crazy and after about 6 months I gave it to a mate who couldn't be happier with it. 

1
7/24/2025 10:05pm Edited Date/Time 7/24/2025 10:05pm
CR92 wrote:
I have the same issue. I got a pair of oakley airbrakes and they fit so much better around the nose. The whole goggle lens, frame...

I have the same issue. I got a pair of oakley airbrakes and they fit so much better around the nose. The whole goggle lens, frame, and system are phenomenal. 

That said, I almost immediately went back to my 100% armegas because of the strap that holds the oakleys on your helmet. The thing is much smaller than the 100%'s and no matter how much I tighten the strap they are incredibly loose. 

Has anyone else dealt with this and oakley airbrakes? 

I wear Airbrakes and Armegas 50/50. I don't have that issue but I also have a big squash -- which stretches the straps plenty. You might try reaching out to Oakley. 

7/24/2025 10:29pm Edited Date/Time 7/24/2025 10:31pm

Scott Prospect goggles were recently updated (Prospect 2.0), they opened up the nose foam a lot and solved the issue for me… Except now they barely contact my nose and tickle the nose to death driving me crazy…

2
429 Sterling
Posts
315
Joined
11/19/2023
Location
Boston, MA, USA
7/24/2025 11:44pm
I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic. 

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

JnDubZ wrote:

They are a bit pricey but honestly, I think Oakly airbrakes would suit you and be a comfortable fit. 

If you aren’t picky about color you can find great deals on airbrakes. I’ve picked them up for as little as $50 on discount.

2
sumdood
Posts
9128
Joined
3/11/2013
Location
San Clemente, CA, USA
Fantasy
7/25/2025 3:55am Edited Date/Time 7/25/2025 3:59am

Same problem here. This will sound dumb but when I was racing I wore kids goggles lol. I lost a little peripheral vision with them but I could breathe so the trade off was worth it. I discovered something by accident that really helped. My wife wears glasses so I got her Oakleys that are designed to go over glasses. I borrowed them one time and found I could breathe way easier. The foam is 50% or more thicker than a standard goggle, they pinched less right out of the box, plus the extra thickness gives you more foam to trim around the nose area. I ordered another pair about 6-7 months ago, I forget the official name but they’re the ones designed to fit over glasses. The extra thick foam made a huge difference. 

1
yak651
Posts
8999
Joined
8/26/2006
Location
Appleton, WI, USA
Fantasy
7/25/2025 3:58am
I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic. 

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

Looks like something weird is going on and your goggles aren’t centered. The left side (your right) is pushed over, maybe it’s the camera but it doesn’t look right.

1
Madmax31
Posts
2143
Joined
1/7/2009
Location
Cincinnati, OH, USA
Fantasy
7/25/2025 6:18am

Better try and fix the old smiths haha

Those things were awesome—the best goggles ever. I need to dig out an old pair and send them to a place in China to replicate them. 

1
7/25/2025 6:31am
I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic. 

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

JnDubZ wrote:

They are a bit pricey but honestly, I think Oakly airbrakes would suit you and be a comfortable fit. 

If you aren’t picky about color you can find great deals on airbrakes. I’ve picked them up for as little as $50 on discount.

Yeah between retail sales and MX Locker, I've acquired several pairs for much less than $100. I think (maybe not necessarily Oakley) riders who are sponsored, will wear a pair once or twice and then sell them for 1/3rd of the retail price when they get a new shipment.

1
wwdiii
Posts
2581
Joined
4/15/2019
Location
League City, TX, USA
7/25/2025 8:19am

Since I’ve lost weight and cut my hair shorter, my helmet is probably a tick too large.  Which pushes my goggles down.  I might look at getting one size smaller foam from Bell.  Or better yet excuse to get a new lid.  Either way better than looking like a bobble head going around the track!

The cycle gear in Webster, Tx not far from me sometimes has a few helmet's worth trying on.  May look online see what they have in stock and go try some on.  

1
971_Fan
Posts
1176
Joined
4/11/2024
Location
Los Angeles, CA, USA
7/25/2025 8:48am

EKS for the win, both in and out of court. 

10
wiggins419
Posts
84
Joined
2/14/2016
Location
Motor City, MI, USA
7/25/2025 12:17pm

Scott Primal solved this issue for me. I have a deviated nasal septum and am very sensitive to pressure. The Scott rep told me to try these and they are a game changer. I’ve tried them all and IMO the bigger/ more expensive the goggle, the more it presses on your nose 

1
mvd61
Posts
1327
Joined
10/15/2021
Location
Brandon, SD, USA
7/25/2025 12:59pm
aees wrote:
Scott (owners) is out of MX/Enduro so i would be careful investing in them. They have already started winding down and informed resellers and distributors since...

Scott (owners) is out of MX/Enduro so i would be careful investing in them. They have already started winding down and informed resellers and distributors since a few months back. 

Unless someone buys the business and continue.

Leatt have one of the heavier Goggles so stay away from them. Had the exact same problem you describe. Was bulky when fitted.

 

For real? WTH I love Scott goggles. 

Lineman25
Posts
209
Joined
4/7/2019
Location
Moncks Corner, SC, USA
7/25/2025 3:43pm

Scott fury doesn't pinch my nose 100% and prospect does

wrc777
Posts
3240
Joined
5/21/2020
Location
Greenwood, IN, USA
Fantasy
7/25/2025 4:55pm

Scott, Astars, and Oakley all pinch my nose less than Armega. Oakley is probably the best fit, but they fog for me and seem hotter than the others. 

4DAIVIPAI2K5
Posts
1126
Joined
12/15/2016
Location
Coshocton, OH, USA
7/25/2025 5:34pm
aees wrote:
Scott (owners) is out of MX/Enduro so i would be careful investing in them. They have already started winding down and informed resellers and distributors since...

Scott (owners) is out of MX/Enduro so i would be careful investing in them. They have already started winding down and informed resellers and distributors since a few months back. 

Unless someone buys the business and continue.

Leatt have one of the heavier Goggles so stay away from them. Had the exact same problem you describe. Was bulky when fitted.

 

mvd61 wrote:

For real? WTH I love Scott goggles. 

Well they did just introduce a new mx goggle...

1
pbody
Posts
350
Joined
12/9/2014
Location
Phoenix, AZ, USA
7/25/2025 6:11pm
CH112 wrote:
I have had the same problem with most brands. I came across a thread in here a while back showing how wide the nose port is...

I have had the same problem with most brands. I came across a thread in here a while back showing how wide the nose port is on the new Scott Prospect 2.0 and decided to give it a try. It solved my problem  

Same here....Scott Prospect 2.0 are better.

FGR01
Posts
6144
Joined
10/1/2006
Location
USA
Fantasy
7/26/2025 7:49am

I was the one that posted in the other thread(s) about the Scott Prospect 2.0 wide nose opening.   I've been wearing them and the new 6D ATR-3 for about 9 or 10 months now and it is a total game changer for me.   And recently, I added the INtake nose magnet thingy into the mix.  Holy crap.. I can breath through my nose!  First time in 40+ years of MX.   The Prospect 2.0 and the Intake are a really good match.  The wide opening of the Prospect allows room for the INtake.. and the stiffness of the Intake plastic bridge provides additional support to prevent the goggle from smushing down on your nose.  It's almost like they were designed together.  If you guys doubt this Intake, let me tell you I ride both MX and MTB with a HRM at all times.  And I am getting significantly reduced HR wearing this thing just from being able to breathe through my nose.  Not exaggerating.  And I get less cotton mouth riding MX since I am not full mouth breathing.

If you're wondering if the Intake would benefit you....  look in the mirror, tilt your head back so you can see your nostrils...  breath in hard through your nose.  If your nostrils collapse in on themselves and restrict your breathing.. go order the Intake right now.  LOL

1
7/26/2025 10:34am

I wear Snow Scott Prospects ( with Moto lens) and the Alpinestars Supertech goggles.  I've been told I have a big honker, and the 100% goggles have always pinched my nose too. I found that the snow version of the Scott prospects have a thicker foam. And I have been wearing the snow frames with MX lenses for a couple years .

 

When the Alpinestars goggles came out I decided to give them a try. I got them the day after they were available and love them. They have a great field of vision and the overall frame is smaller for a premium goggle that has such an open field of view. They have a  more molded foam instead of the squared off die cut looking foam that is on most goggles. The foam feels firmer than my Prospects . On my face it feels similar to the Armega foam as far as stiffness goes, but its sculped and they feel like they put more pressure on my forehead and cheeks than my nose. 

The Supertech Goggle has thin channels that allow sweat to escape between Your face and the foam. I was worried about dust being able to get through. But so far that has not been an issue. Even with dust from a sport SXS on a dry track. I wear Alpinestars helmets too and together they work well. I was so surprised at how well I could see out of them without any parts of the frame obstructing my view after noticing they were smaller than the Prospect and Armega frames.

 

I have not tried the Prospect 2 goggles yet. I like the injection molded lens better than a flat lens. I know that there is an injection molded lens for the Prospect available too, but I like the options of running different color lenses.And I think the injection molded lens for the prospect is limited in colors and or types.

2
1
aeffertz
Posts
12766
Joined
7/16/2015
Location
La Crosse, WI, USA
7/26/2025 11:24am
I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic. 

1000013541 0I think I'm going to try and trim away some of the foam which is what is pushing on my nose and not the plastic.

 

Your head is built like mine, I’m assuming you have a big forehead too. 😆 

I’ve had the same problem that is very evident in your picture. Your eyes are sitting at the bottom of the google and most of the lens is protecting your forehead. It all starts with the helmet and where it will place the goggle on your face so unfortunately it’s one of those things where you just have to try on each brand and find one that centers your face the best. If you're committed to that helmet, Spy makes a goggle that is taller/dips lower called the WOOT that fit me well. 
IMG 1407 7.jpeg?VersionId=EivrnJtlEdTcTUfO8fwfx7k60
Another option I haven’t personally tried but want to is the Oakley Frontline. They look to have a similar taller frame and a ‘softer’ nose bend. 
IMG 1408 1

FGR01
Posts
6144
Joined
10/1/2006
Location
USA
Fantasy
7/26/2025 11:40am
I wear Snow Scott Prospects ( with Moto lens) and the Alpinestars Supertech goggles.  I've been told I have a big honker, and the 100% goggles...

I wear Snow Scott Prospects ( with Moto lens) and the Alpinestars Supertech goggles.  I've been told I have a big honker, and the 100% goggles have always pinched my nose too. I found that the snow version of the Scott prospects have a thicker foam. And I have been wearing the snow frames with MX lenses for a couple years .

 

When the Alpinestars goggles came out I decided to give them a try. I got them the day after they were available and love them. They have a great field of vision and the overall frame is smaller for a premium goggle that has such an open field of view. They have a  more molded foam instead of the squared off die cut looking foam that is on most goggles. The foam feels firmer than my Prospects . On my face it feels similar to the Armega foam as far as stiffness goes, but its sculped and they feel like they put more pressure on my forehead and cheeks than my nose. 

The Supertech Goggle has thin channels that allow sweat to escape between Your face and the foam. I was worried about dust being able to get through. But so far that has not been an issue. Even with dust from a sport SXS on a dry track. I wear Alpinestars helmets too and together they work well. I was so surprised at how well I could see out of them without any parts of the frame obstructing my view after noticing they were smaller than the Prospect and Armega frames.

 

I have not tried the Prospect 2 goggles yet. I like the injection molded lens better than a flat lens. I know that there is an injection molded lens for the Prospect available too, but I like the options of running different color lenses.And I think the injection molded lens for the prospect is limited in colors and or types.

The hard injection molded lenses for the Prospect, Fury, and Prospect 2.0 are available in multiple colors.  Basically all the "Amp" series of lenses are the hard, pre-curved ones.  I understand they certainly provide better protection, but I like the non-hard ones as they allow the goggle to flex and conform to my face better.

7/26/2025 1:25pm
I wear Snow Scott Prospects ( with Moto lens) and the Alpinestars Supertech goggles.  I've been told I have a big honker, and the 100% goggles...

I wear Snow Scott Prospects ( with Moto lens) and the Alpinestars Supertech goggles.  I've been told I have a big honker, and the 100% goggles have always pinched my nose too. I found that the snow version of the Scott prospects have a thicker foam. And I have been wearing the snow frames with MX lenses for a couple years .

 

When the Alpinestars goggles came out I decided to give them a try. I got them the day after they were available and love them. They have a great field of vision and the overall frame is smaller for a premium goggle that has such an open field of view. They have a  more molded foam instead of the squared off die cut looking foam that is on most goggles. The foam feels firmer than my Prospects . On my face it feels similar to the Armega foam as far as stiffness goes, but its sculped and they feel like they put more pressure on my forehead and cheeks than my nose. 

The Supertech Goggle has thin channels that allow sweat to escape between Your face and the foam. I was worried about dust being able to get through. But so far that has not been an issue. Even with dust from a sport SXS on a dry track. I wear Alpinestars helmets too and together they work well. I was so surprised at how well I could see out of them without any parts of the frame obstructing my view after noticing they were smaller than the Prospect and Armega frames.

 

I have not tried the Prospect 2 goggles yet. I like the injection molded lens better than a flat lens. I know that there is an injection molded lens for the Prospect available too, but I like the options of running different color lenses.And I think the injection molded lens for the prospect is limited in colors and or types.

FGR01 wrote:
The hard injection molded lenses for the Prospect, Fury, and Prospect 2.0 are available in multiple colors.  Basically all the "Amp" series of lenses are the...

The hard injection molded lenses for the Prospect, Fury, and Prospect 2.0 are available in multiple colors.  Basically all the "Amp" series of lenses are the hard, pre-curved ones.  I understand they certainly provide better protection, but I like the non-hard ones as they allow the goggle to flex and conform to my face better.

Maybe its in my head, but I feel like I can see better through an injection molded lens.  I've only seen Rose, Gold, Blue chrome and grey  lenses in the Amp series.   4 colors . 

 

 The Supertech has Clear,Yellow,bronze,grey,blue, multiple mirrored chrome colors, dual pane in multiple colors, etc.   I like the non mirrored blue, yellow, clear and dual lens for cold weather .

 

 I still have more pairs of Prospects than I have of the Supertechs. I just love the way the lens changes on the Supertech and the way they fit, and how I see when looking through the lens itself. I like and wear both still. And want to get a pair of the Prospect 2 to try too. I'm not saying the Prospect is bad, just that I find the Alpinestars to be better for ME.  

2
1
SoCalMX70
Posts
3581
Joined
4/1/2008
Location
Thousand Oaks, CA, USA
7/26/2025 1:48pm Edited Date/Time 7/26/2025 1:49pm

Didn't read every reply, but just wanted to say I tried 100% goggles all of 2023 and part of 2024 and gave up. They pinch (I have a small nose) and are an example of a goggle company taking the "bigger is better" too far. The thickness of the foam and frame make it feel like you're looking down a tunnel. I also had to take extra care to adjust them to my face and within the helmet to make them feel "right". It was a pain in the ass every race weekend.

Went back to Scott and couldn't be happier. Prospects (and the Prospect 2.0s) have been great. I also greatly prefer the 4 point mounting system for tear offs... I never accidentally pull the whole stack.

 

7/26/2025 2:41pm

Looks like Prospect 2.0 is the best opinion to try. I'll go for those. Thanks for the replies. I never expected so many responses.

7/27/2025 1:43pm

I was looking at the nose area on my supertech and prospect goggles the other day and noticed how much more open the supertech is. Im surprised  at how big the nose area is. I want to get some prospect 2.0 and airbrakes as well as the brand that shall not be mentioned to compare all of them. Maybe some leatt goggles too. Ive got some armegas I put aside when I was going to make a video comparing them and the supertech. Hopefully ill get to do that someday. I just dont see myself being able to do it anytime too soon.  

 I wanted the foam to be red on both pairs so it was easier to see . I only had a set of unworn snow prospects with the dual snow lens still in them.  The snow version frame is the same, just a little thicker foam . Its really soft and comfirtable. I eas surprised at what the nose area looked like on them and that it felt less testrictive than the armega set i have. If i so a video compariason ill get a pair of moto prospect's too to try them and compare both. And prospect 2.0s 

 

The supertech goggles are the pair with sone blue on them. The prospects are black/white/red foam. 

10000048681000004875.jpg?VersionId=kcAKe5VpMdjfl51000004877 01000004876.jpg?VersionId=bxT3passll31XpECa.ZdJz 3VfmH1000004874

1
7/27/2025 2:39pm

I ended up ordering a pair of Fly since I have a Fly helmet. Easy Amazon return if needed. The 2.0 are supposed to be more open in the nose than the original prospect. I really like the Supratechs and from the picture, they seemed to have more room but that's hard to tell without fitment/positioning.

Post a reply to: Goggles

The Latest