A little help in Sacramento?

Related:
Insta Hub
Riesenberg448 12/9/2020 8:52pm
12/9/2020 8:52pm
Riesenberg448 wrote:
Do you know what Mayson weighs and what spring rates are on the bike? I'd be happy to send up a set of proper rate springs...
Do you know what Mayson weighs and what spring rates are on the bike? I'd be happy to send up a set of proper rate springs from Race Tech for Mayson if you wanted to drop them in when doing the rebuild.
Hammer 663s wrote:
For the front a .38 rate spring set (FRSP 324538) would be perfect. A 5.6 rate (SRSP 552456) would likely be good for the rear. Springs...
For the front a .38 rate spring set (FRSP 324538) would be perfect. A 5.6 rate (SRSP 552456) would likely be good for the rear. Springs can be shipped to Brian at:

Roth Racing
3755 Old Auburn Road
Roseville, CA 95661

Thank you guys so much!!!!

Hammer 663s
Perfect, the springs will ship out tomorrow to Roth Racing.

I am sending a swag pack with shirt/hat/stickers along with a Sag Master tool and Race Tech Suspension Bible directly to Mayson also that will ship tomorrow.




Thanks for organizing this for this young man.
14
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/9/2020 8:56pm
12/9/2020 8:56pm
onenastynotch wrote:
This is unreal...im tearing up reading all of this...a complete clutch kit for his bike is heading his way tommorrow..i dident see anyone mention it. Or...
This is unreal...im tearing up reading all of this...a complete clutch kit for his bike is heading his way tommorrow..i dident see anyone mention it.
Or hammer i can send out a complete linkage bearing and steering head kit from motosport..which ever u think is best..i wish i lived in cali id help slipdog go thru the bike as im a 30 year bike and car mechanic let meknow what you think is best
I just ordered a steering head kit and upper shock bearing a few minutes ago. Slipdog says the linkage bearings look pretty good - just need cleaned and fresh grease. A clutch kit is a solid idea. I've been very happy with the Tusk HD Competition kit on my boy's KX85. They run really clean so the trans oil lasts a long time.

Hammer 663s
1
onenastynotch
Profile picture for user onenastynotch
Posts
724
Joined
3/3/2007
Location
West Babylon, NY, USA
onenastynotch 12/9/2020 9:03pm
12/9/2020 9:03pm
onenastynotch wrote:
This is unreal...im tearing up reading all of this...a complete clutch kit for his bike is heading his way tommorrow..i dident see anyone mention it. Or...
This is unreal...im tearing up reading all of this...a complete clutch kit for his bike is heading his way tommorrow..i dident see anyone mention it.
Or hammer i can send out a complete linkage bearing and steering head kit from motosport..which ever u think is best..i wish i lived in cali id help slipdog go thru the bike as im a 30 year bike and car mechanic let meknow what you think is best
Hammer 663s wrote:
I just ordered a steering head kit and upper shock bearing a few minutes ago. Slipdog says the linkage bearings look pretty good - just need...
I just ordered a steering head kit and upper shock bearing a few minutes ago. Slipdog says the linkage bearings look pretty good - just need cleaned and fresh grease. A clutch kit is a solid idea. I've been very happy with the Tusk HD Competition kit on my boy's KX85. They run really clean so the trans oil lasts a long time.

Hammer 663s
Ok perfect a clutch kit will be sent out tommorow mornin!!
3
ML512
Profile picture for user ML512
Posts
16989
Joined
12/28/2008
Location
Wildomar, CA, USA
Fantasy
1280th
ML512 12/9/2020 9:23pm
12/9/2020 9:23pm
nbaldwin148 wrote:
Ok sounds good. I will call fmf tomorrow and see what they have for him. Stay tuned.
Beat ya to it, Yoshimura will be on its way. Thanks BigE! Smile
28
1

The Shop

See All »
slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog 12/9/2020 9:36pm
12/9/2020 9:36pm Edited Date/Time 12/9/2020 9:39pm
slipdog wrote:
Sorry I haven't checked in sooner but it's been a busy week for me. For its age, Mayson's bike is in pretty good condition. I pulled...
Sorry I haven't checked in sooner but it's been a busy week for me. For its age, Mayson's bike is in pretty good condition. I pulled off the front end today and the steering bearings were dry and rusty, especially the lower. I wiped them down, ran some fine Emory around the races, and put some fresh grease on them but they are still notchy and need to be replaced. I will check out the swingarm/linkage when I tear the rear apart but like the front end, I'd assume they've never seen anything but the OEM grease. I will also pop off the tank and valve cover and see how the clearances are looking.

Mayson's grandpa Rick is a really nice guy and seems really blown away and appreciative of all the help that is being offered. We spoke for about an hour when he dropped off the bike and he has a cool background and ties to the sport himself.

Riesenberg448 wrote:
Do you know what Mayson weighs and what spring rates are on the bike? I'd be happy to send up a set of proper rate springs...
Do you know what Mayson weighs and what spring rates are on the bike? I'd be happy to send up a set of proper rate springs from Race Tech for Mayson if you wanted to drop them in when doing the rebuild.
Mayson weighs 123lbs in street clothes. The bike has the stock springs but the rear is coming in way light at 4,95 on my tester.

Edit: Looks like you guys got him covered, I'm late to the party as usual, lol
4
ctbale
Profile picture for user ctbale
Posts
1103
Joined
1/4/2014
Location
Gustavus, AK, USA
ctbale 12/9/2020 10:18pm
12/9/2020 10:18pm Edited Date/Time 12/9/2020 10:28pm
Sent a few bucks. Carb kit? Slipdog$ ? .. I have rebuilt a few (really) old hondas and ol slipdog is gunna be busy! Haha. Thanks to everyone involved!!!!!!!
4
Edge-Of-Adhesion 12/9/2020 11:58pm
12/9/2020 11:58pm Edited Date/Time 12/10/2020 1:01am
Sent £50 (about $65) from Nick in England. Paypal might deduct a few dollars for the international transfer but still should be enough to get the lad a few tanks of gas.
12
timobijnen84 12/10/2020 12:13am
12/10/2020 12:13am
Oh man i just discovered this thread. I was thinking of going to the last page but read all pages and it had me quiet some times. The help from the community is awesome.

Thank you Hammer and all others that have been involved. This is amazing.
4
jrunge612
Profile picture for user jrunge612
Posts
11
Joined
6/10/2010
Location
Alton, IL, USA
jrunge612 12/10/2020 5:12am
12/10/2020 5:12am
It looks like he could use a gear bag? Unless I overlooked that?

I'll get one headed his way if he needs one.
6
nbaldwin148
Profile picture for user nbaldwin148
Posts
10
Joined
9/12/2020
Location
Granite Bay, CA, USA
nbaldwin148 12/10/2020 6:44am
12/10/2020 6:44am
nbaldwin148 wrote:
Ok sounds good. I will call fmf tomorrow and see what they have for him. Stay tuned.
ML512 wrote:
Beat ya to it, Yoshimura will be on its way. Thanks BigE! Smile
Sweet thanks ML! Hopefully Hammer can get a new update on what is spoken for today so we can figure out what is left. Hard to keep track at this point!
3
jamiechapman418 12/10/2020 6:58am
12/10/2020 6:58am
nbaldwin148 wrote:
Sweet thanks ML! Hopefully Hammer can get a new update on what is spoken for today so we can figure out what is left. Hard to...
Sweet thanks ML! Hopefully Hammer can get a new update on what is spoken for today so we can figure out what is left. Hard to keep track at this point!
x2 on that! Would love to chip in if anything else is needed for him.
2
nbaldwin148
Profile picture for user nbaldwin148
Posts
10
Joined
9/12/2020
Location
Granite Bay, CA, USA
nbaldwin148 12/10/2020 7:21am
12/10/2020 7:21am
If hammer gets an update in today and no one has pulled it yet, I will get him new black wheels, spoke kit, and wheel bearings. We will get them relaced up and dialed in. I would order the full Tusk wheel set but they are back ordered!
Unless ML or someone can get John with Dubya involved I’d throw down a couple hundo on a full new set.
5
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/10/2020 7:25am
12/10/2020 7:25am
I’ll post an updated list once I get to work.

From posts above, a carb kit and a gear bag are both great ideas.

Hammer 663s
4
Chad198
Profile picture for user Chad198
Posts
55
Joined
2/28/2013
Location
Huntington Beach, CA, USA
Chad198 12/10/2020 7:38am
12/10/2020 7:38am Edited Date/Time 12/10/2020 7:50am
Hammer 663s wrote:
I’ll post an updated list once I get to work.

From posts above, a carb kit and a gear bag are both great ideas.

Hammer 663s
Sudco will be sending a carburetor kit and an assortment of jets right out!
5
Premix4Life 12/10/2020 7:55am
12/10/2020 7:55am Edited Date/Time 12/10/2020 7:56am
glad to be a part of this. Great job everyone! Hat tip to Hammer!
I've never read a 11 page thread in it's entirety until this one. This thread delivers!
5
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/10/2020 8:51am
12/10/2020 8:51am
jrunge612 wrote:
It looks like he could use a gear bag? Unless I overlooked that?

I'll get one headed his way if he needs one.
I'll put you donw for a gear bag - great idea! He's gonna need it!

Hammer 663s
1
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/10/2020 8:51am
12/10/2020 8:51am Edited Date/Time 12/10/2020 10:06am
Update for this morning. I think I have it all listed - please let me know if I missed you!!!

Mayson is 5'7" and 120.
30 pant, medium jersey, medium glove
10 boot
Helmet size Medium
Prefers red & black color theme.

Bike is 07 CRF150r Expert (big wheel)

Cash in hand - $2250 total
Suspension service - Slipdog, Mr. Parker and Mag23
Levers - Tim 969v
Boots Tech 7s - onefiveeight
Air filters - JTM
Grips - Motosport
Gear set - larryloupout
TP199 knee guards, socks, shirt - Wyatt
Plastics/Graphics - omalley & Decal Works!
Goggle set - Justin
Chain & Sprockets - Moto849TD
Seat cover - Guts Racing
Maxima chain kit - SlowGTI
Hand tools - DCMX & Tools: Dan the Tool Man
Wrench set - BigBoreFan58
Neck Brace - AHarmon237
Honda Hoodie - BudLong82
Kenda tires, new tubes, and fresh brake pads - Chris Walent
Thor Helmet - Titanium
Maxima chain kit and tie downs - CaptMoto
Track chairs & bike stand - slowGTI
Bars and barpad - Seth505
2 pair TLD gloves - TeamGreen
RacerX subscription - Dimblewambie
Oils/Lubes - cwolf96
Fork Guards w/graphics & Tusk shift/brake levers - Hammer 663s
Bling - Works Connection
X Brand Goggles and WTS Swag - David Pingree (Ping 101)
Funnel and clutch/throttle cables - MXRacer816
Craftsman 3/8" Torque wrench - AJ565
CRF150rb shop manual - AHRMA361 -
Case Honda engine AND trans oil - Phoenix Racing Honda
Matrix Toolbox - Whymee
Training vids and books - bigmaico
Acerbis hand guards - Wingalls
Moto casual wear - Troy
VP Fuel jug - Mcintosh family
Rotors and rotor/sprocket bolts - Donation cash
Tire pump, gauge, and tire irons - Radical
2 pair gloves - Jed at Galatic Sox
Set of Dunlpos - Crossup
Clutch kit - onenastynotch
Yosh exhaust - ML512
New springs and Swag - Race Tech
Carb rebuild kit - Chad198
Wheel rebuild parts - nbaldwin148 & Cole Bridenbaker
gear bag and goodies - jrunge612 via Fox/Shift
TLD Helmet - MotoCoUSA

KTM race rig tour @ Hangtown 2021 - courtesy of Mag23 & the Vohlands!


Hammer 663s
7
MotoCoUSA
Profile picture for user MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
MotoCoUSA 12/10/2020 9:03am
12/10/2020 9:03am
Whoa... amazing. How can I chip in at this point? Seems like most things are covered. Let me know Hammer!

2
1

Pit Row

See All »
nbaldwin148
Profile picture for user nbaldwin148
Posts
10
Joined
9/12/2020
Location
Granite Bay, CA, USA
nbaldwin148 12/10/2020 9:09am
12/10/2020 9:09am
Perfect thanks for the update Hammer. FYI i have the rebuild of the wheels covered by Cole Bridenbaker as well. We are all friends of Roth and can help wherever needed.
3
MotoCoUSA
Profile picture for user MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
MotoCoUSA 12/10/2020 9:10am
12/10/2020 9:10am Edited Date/Time 12/10/2020 9:41am
I don’t see helmet listed, any idea on a preference he might have as a brand goes?

Edit: nvm saw a helmet on there. Doesn’t hurt to have another?

Edit again - TLD helmet on the way.
4
Nathaniel129 12/10/2020 9:50am
12/10/2020 9:50am
nbaldwin148 wrote:
Perfect thanks for the update Hammer. FYI i have the rebuild of the wheels covered by Cole Bridenbaker as well. We are all friends of Roth...
Perfect thanks for the update Hammer. FYI i have the rebuild of the wheels covered by Cole Bridenbaker as well. We are all friends of Roth and can help wherever needed.
You have local guys like Cole Bridenbaker helping out, and also people creating accounts from across the world just so they can send money for this kid.
Such an incredible thing you've done here, Hammer. I know I'm not the only one who checks this thread every single day just to see some more faith in humanity restored.
14
jrunge612
Profile picture for user jrunge612
Posts
11
Joined
6/10/2010
Location
Alton, IL, USA
jrunge612 12/10/2020 9:53am
12/10/2020 9:53am
jrunge612 wrote:
It looks like he could use a gear bag? Unless I overlooked that?

I'll get one headed his way if he needs one.
Hammer 663s wrote:
I'll put you donw for a gear bag - great idea! He's gonna need it!

Hammer 663s
Gear bag is sent, courtesy of Fox/Shift. We are also sending him a goodie bag with a backpack, hats, etc.

Kudos to everyone for helping out this kid. I hope it makes a difference for him.
6
Premix4Life 12/10/2020 9:56am
12/10/2020 9:56am
Cant wait to see video of him ripping on the tricked out 150 and new gear! Sick 'factory' setup Mayson!
4
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/10/2020 10:08am
12/10/2020 10:08am Edited Date/Time 12/10/2020 10:08am
I've edited the list above on the fly this morning due to all the activity! Almost 25,000 views and climbing! Vital MX posted on IG and Twitter about this yesterday (A Christmas Story) and it started a whole new round of awareness and interest.

Hammer 663s
7
nbaldwin148
Profile picture for user nbaldwin148
Posts
10
Joined
9/12/2020
Location
Granite Bay, CA, USA
nbaldwin148 12/10/2020 10:11am
12/10/2020 10:11am
Hammer, Could you provide an address for Mayson Directly? We are gonna ship the wheel kit direct and work with his grandparents on getting them dialed for him. I know its in the thread somewhere but im running around crazy today.
Thanks
4
Nathaniel129 12/10/2020 10:13am
12/10/2020 10:13am Edited Date/Time 12/10/2020 10:14am
nbaldwin148 wrote:
Hammer, Could you provide an address for Mayson Directly? We are gonna ship the wheel kit direct and work with his grandparents on getting them dialed...
Hammer, Could you provide an address for Mayson Directly? We are gonna ship the wheel kit direct and work with his grandparents on getting them dialed for him. I know its in the thread somewhere but im running around crazy today.
Thanks
Mayson W.
4500 Buckeye Rd
Shingle Springs, CA 95682
It's on page one 😉
2
Hammer 663s
Profile picture for user Hammer 663s
Posts
3092
Joined
6/2/2016
Location
Forest Grove, OR, USA
Hammer 663s 12/10/2020 10:15am
12/10/2020 10:15am
Mayson's address is:

Mayson W.
4500 Buckeye Rd
Shingle Springs, CA 95682


Hammer 663s
1
nbaldwin148
Profile picture for user nbaldwin148
Posts
10
Joined
9/12/2020
Location
Granite Bay, CA, USA
nbaldwin148 12/10/2020 10:18am
12/10/2020 10:18am
Thanks guys. Putting it in now!
3
jcurren191
Profile picture for user jcurren191
Posts
1
Joined
12/10/2020
Location
Fairfield, CA, USA
jcurren191 12/10/2020 10:40am
12/10/2020 10:40am
Hammer 663s wrote:
I know a kid lives out near Placerville. He's been my boy's best friend since they were 5. Mayson is 14 and just got a well-used...
I know a kid lives out near Placerville. He's been my boy's best friend since they were 5. Mayson is 14 and just got a well-used CRF150r. They don't have a ton of $$$. Anyone in the Sac area want to help me give his suspension a rebuild? Both ends need seals, oil, probably bushings. I'll pay for the parts.

Hammer 663s
I'm not a kid with a ton of money either but work on a lot of bikes. In Fairfield area, if he needed any work on the bike, motor or suspension. I can't donate anything but I'd be glad to help him out with a suspension rebuild or any work on the motor, changing tires and all.
18
shuggs
Profile picture for user shuggs
Posts
1820
Joined
8/6/2008
Location
Dunfermline, GB
shuggs 12/10/2020 12:05pm
12/10/2020 12:05pm Edited Date/Time 12/10/2020 12:06pm
Small contribution from Scotland sent.

Hammer you sir are a legend for starting this thread, just goes to show that even though everyone has had a crappy year but when the chance comes to do some good a lot of people are more than happy to chip in with what they can.
11

Post a reply to: A little help in Sacramento?