Added reply in a thread Let's see/review those 2019 kx450s 11/17/2019 6:43 AM

Got my can finished, I get bored when it gets cold outside...
Added reply in a thread Let's see/review those 2019 kx450s 11/15/2019 2:14 PM

Nah just got it in today, was just wondering if I needed to space it out so I could go ahead and find a spacer before I install it

Added reply in a thread Let's see/review those 2019 kx450s 11/15/2019 1:43 PM

Did u guys have to use a thicker washer on the rear brake for clearance on the rekluse clutch cover? The paper it came with said kx450f 10+ needed to use the washer provided but mine didn't have a provided washer..

Added reply in a thread Let's see/review those 2019 kx450s 11/9/2019 6:22 PM

I finally pulled the plasti dip black paint off of my fmf can... stuff didn't fade or bubble what so ever..

Added reply in a thread Let's see/review those 2019 kx450s 11/9/2019 7:33 AM

And the adjuster do I tighten it until it gets snug then run the locknut up... I'm not sure how exactly to do this and keep them adjusted the same on both legs

Added reply in a thread Let's see/review those 2019 kx450s 11/9/2019 7:14 AM

Question when filling the cartridge up with oil do I work the fluid out until it stops coming out of the air holes

Added reply in a thread Let's see/review those 2019 kx450s 11/7/2019 5:23 PM

Have a torque drive clutch pack coming I ordered the cover too, are they really as good as people say?

Added reply in a thread Let's see/review those 2019 kx450s 11/7/2019 5:00 PM

My first rodeo bud, I always had a race shop in my town service the forks...

Added reply in a thread Let's see/review those 2019 kx450s 11/7/2019 3:57 PM

It dawned on me to break the top clamp bolts loose then it was effortless easy peasy!! I had 250 ml in both legs

Added reply in a thread Let's see/review those 2019 kx450s 11/7/2019 11:52 AM

Anybody have trouble getting the fork caps off, I tweaked my front end and twisted the legs in the clamps... The caps look like shit now lol

Added reply in a thread Let's see/review those 2019 kx450s 11/6/2019 11:55 AM

A torque drive clutch pack works with the oem basket right?

Added reply in a thread Let's see/review those 2019 kx450s 10/30/2019 11:24 AM

Yep I bought the same one, they look really good and are cheap...

Added reply in a thread Let's see/review those 2019 kx450s 10/18/2019 5:57 PM

Yes sir not sure why its white tho

Added reply in a thread Let's see/review those 2019 kx450s 10/18/2019 10:30 AM

Acerbis skidplate don't look half bad

Added reply in a thread Let's see/review those 2019 kx450s 10/13/2019 7:52 PM

What fork oil height do you guys recommend? How much is to much?

Added reply in a thread Let's see/review those 2019 kx450s 10/2/2019 6:30 PM

Break it down and grease it, especially the steering stem bearings

Added reply in a thread Let's see/review those 2019 kx450s 9/29/2019 3:32 PM

Will a carbon fiber skidplate hold up for a long time... I do a little bit of everything with my bike, I've never owned one looking for some feedback

Added reply in a thread Let's see/review those 2019 kx450s 9/25/2019 6:45 PM

Has anybody ran non oem fork oil on the 19? If so did it changec the feel

Added reply in a thread Let's see/review those 2019 kx450s 9/23/2019 3:40 AM

Thx bud

Added reply in a thread Let's see/review those 2019 kx450s 9/22/2019 4:49 PM

Does the ride engineering link noticeably lower the seat height?