Recent Activity
All
Hal_396 Added a reply to How to scrub by Valentin Guillod, photo sequence...
6/24/2015 9:11am +1
More »
Hal_396 Added a reply to KTM 250 SX Carb Swap
6/24/2015 9:08am Installing a 300 kit on my bike soon. Jetting good to go from a 250 to the 300 or will I need to change something?
Hal_396 Added a reply to Who rides with a kidney belt on?
10/29/2014 7:49am I have one in my gear bag. After reading all this it's going on when I ride tomorrow night. If you ever fall over and the back tire opens your chest protector like your a lobster, you'll start wearing one.
Hal_396 Added a reply to 2014 Husqvarna TC250!!
10/16/2014 4:33am The 14's came with 4860 closed chamber forks.
Hal_396 Added a reply to Any full sized Ford Transit vans set up for MX?
10/10/2014 6:44am I'd like to know also. Thinking of doing the same thing.
Hal_396 Added a reply to KTM 250 SX Carb Swap
10/3/2014 2:43pm Thanks for the heads up 97nismo.
Hal_396 Added a comment about bike check 1986 Yamaha YZ490S
10/3/2014 2:38pm
God I had a 87 YZ490 and I think it was the worst bike I have ever owned. I turned it into a Glamis sand dune bike with a paddle tire and all. The bike excelled in that environment.
This bike check has 18 comments.
Hal_396 Added a reply to Sprinter 4 Cyl vs 6 Cyl
10/1/2014 3:03am My company has thousands of Sprinters. Do yourself a favor and get something else. They rust out easy if you live in the salt belt, rear ends are crap and parts aren't cheap. I for one am looking at the Nissan vans.
Hal_396 Added a reply to Can car machnics work on dirt bikes ?
10/1/2014 2:59am Can car or dirt bike mechanics work on Aircraft?
Hal_396 Added a reply to RV's new number?
10/1/2014 2:56am That's Ronnie Mac's number..... :-)
Hal_396 Added a reply to Harbor freight tools Good or Bad
9/26/2014 3:34pm My theory is: If you plug it into an electrical outlet or air hose don't buy it at harbor Freight. If its a hand tool, it's OK.
Hal_396 Added a reply to 1997 CR250
9/26/2014 1:14am I don't think so.
Hal_396 Added a reply to 1997 CR250
9/24/2014 5:15pm Looking forward to your comparison of the two bikes.
Hal_396 Added a reply to 1997 CR250
9/24/2014 9:33am I have a 97 250 also. Ride the thing nearly every week. Race Tech'd both ends, 265 big bore kit, pro-circuit pipe. As a matter of fact I'll be taking it to the track this afternoon. Yours look very good. Don't be afraid to ride it.
Hal_396 Added a reply to I need input from anyone involved with a moto track and finances
9/18/2014 7:39am Go buy 25 acres of unrestricted land, and a skid loader, dig a pond that retains rainfall and install an irrigation system. Build your own track and don't let anyone use it. You will be much happier down the road.
Hal_396 Added a reply to 2015 KTM 250SX - Snapped linkage arm
9/17/2014 6:38am X2. That stuff looks like it has more than 8 hrs on it but the OP says it has 8 hrs so we have to go with that. I do hope KTM makes good on this. Let us know the outcome please.
Hal_396 Added a reply to In this week's Classic Steel I take a look back at the 250 crop of 1997
9/4/2014 5:22am I STILL HAVE MY 97 CR. Glad I keep it and as a matter of act, I'm gonna ride it tonight..........:-)
Hal_396 Added a reply to Ktm 250 sx top end power
9/4/2014 5:05am I put the 38 on my Husky and it was well worth it. My buddy has the same bike I do and when we switch we both can notice the difference.
Hal_396 Added a reply to KTM 250 SX Carb Swap
8/10/2014 1:48pm I think you be good to start with the jetting mentioned above. No reason why it wouldn't work on your EXC 300.