New JT aluminum sprockets?

Rickyisms
Edited Date/Time 12/27/2021 7:02am
Never seen these before, I remember using JT years ago but it seemed like the name started to come back around. These are way cheap for an aluminum sprocket from a brand I've actually heard from. Anyone tried one out yet?
https://www.rockymountainatvmc.com/parts/jt-racelite-aluminum-rear-spro…
|
jtrappitt125 10/7/2021 4:36pm
10/7/2021 4:36pm
Rickyisms wrote:
Never seen these before, I remember using JT years ago but it seemed like the name started to come back around. These are way cheap for...
Never seen these before, I remember using JT years ago but it seemed like the name started to come back around. These are way cheap for an aluminum sprocket from a brand I've actually heard from. Anyone tried one out yet?
https://www.rockymountainatvmc.com/parts/jt-racelite-aluminum-rear-spro…
JT sprockets are extremely popular here in New Zealand.
quality is among the best in the world I would recommend there sprockets to anyone.
Personally I prefer them over Renthal or Talon versions.
5
Munson'd
Profile picture for user Munson'd
Posts
399
Joined
8/19/2019
Location
Madison, WI, USA
Munson'd 10/7/2021 4:55pm
10/7/2021 4:55pm
Fuck me running, that’s a great price.
1
inthebadboycorner 10/7/2021 7:13pm
10/7/2021 7:13pm
Munson'd wrote:
Fuck me running, that’s a great price.
Fuck me running.
Is that a local saying, or American?
2
SCC
Profile picture for user SCC
Posts
386
Joined
10/16/2019
Location
Los Angeles, CA, USA
SCC 10/7/2021 7:32pm
10/7/2021 7:32pm
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
I like factory/trick parts after spending 10k on a bike. Zero chance id buy that shit. Vanity i know but its my money not yours.
18

The Shop

See All »
FWYT
Profile picture for user FWYT
Posts
3553
Joined
5/25/2014
Location
San Diego, CA, USA
FWYT 10/7/2021 7:34pm
10/7/2021 7:34pm
Well I'll be dipped in purple horse shit . . . that's a deal!
5
BobPA
Profile picture for user BobPA
Posts
8330
Joined
10/31/2013
Location
USA
BobPA 10/7/2021 7:37pm
10/7/2021 7:37pm
JT has been making solid driveline components for years, and they are always reasonably priced. Their x-ring chains are nearly unbeatable for the price.
3
SmokinJoe439
Profile picture for user SmokinJoe439
Posts
2386
Joined
3/7/2012
Location
Renton, WA, USA
SmokinJoe439 10/7/2021 7:38pm
10/7/2021 7:38pm
Rickyisms wrote:
Never seen these before, I remember using JT years ago but it seemed like the name started to come back around. These are way cheap for...
Never seen these before, I remember using JT years ago but it seemed like the name started to come back around. These are way cheap for an aluminum sprocket from a brand I've actually heard from. Anyone tried one out yet?
https://www.rockymountainatvmc.com/parts/jt-racelite-aluminum-rear-spro…
Run them for years no problems the aluminum one's. Looks like they updated the looks to something better.
FGR01
Profile picture for user FGR01
Posts
6108
Joined
10/1/2006
Location
USA
Fantasy
926th
FGR01 10/7/2021 7:39pm
10/7/2021 7:39pm
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
Local to Madison, Wisconsin. Only used by people who'v been Munsoned. Fair Dinkum.
7
quadzrulebro 10/7/2021 7:41pm
10/7/2021 7:41pm
JT sprockets have been around for a long time and are as durable as any aluminum sprocket. I’m a Dirt Tricks guy myself.
1
mx317
Profile picture for user mx317
Posts
5332
Joined
4/1/2008
Location
USA
mx317 10/7/2021 7:51pm
10/7/2021 7:51pm
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
SCC wrote:
I like factory/trick parts after spending 10k on a bike. Zero chance id buy that shit. Vanity i know but its my money not yours.
Why would you call it shit? It’s made of 7075-T6 which is the same as Renthal.
7
OFalk280
Profile picture for user OFalk280
Posts
322
Joined
6/27/2012
Location
Elwood, IL, USA
OFalk280 10/7/2021 9:46pm
10/7/2021 9:46pm
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
SCC wrote:
I like factory/trick parts after spending 10k on a bike. Zero chance id buy that shit. Vanity i know but its my money not yours.
So nothing but Dirt Tricks stuff then?
Munson'd
Profile picture for user Munson'd
Posts
399
Joined
8/19/2019
Location
Madison, WI, USA
Munson'd 10/8/2021 4:05am
10/8/2021 4:05am
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
I’ve heard other people say it, I assume it’s an American thing?
1
mpy
Profile picture for user mpy
Posts
642
Joined
8/15/2006
Location
Here or there..., FR
mpy 10/8/2021 5:08am
10/8/2021 5:08am
At that price they are definitely manufactured in China. I think they used to be made in the UK? Wonder how the quality is nowadays...
4DAIVIPAI2K5
Profile picture for user 4DAIVIPAI2K5
Posts
1123
Joined
12/15/2016
Location
Coshocton, OH, USA
4DAIVIPAI2K5 10/8/2021 5:13am
10/8/2021 5:13am
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
I say it in central Ohio lol
TeamGreen
Profile picture for user TeamGreen
Posts
37052
Joined
11/25/2008
Location
Thru-out, CA, USA
TeamGreen 10/8/2021 7:22am
10/8/2021 7:22am Edited Date/Time 10/8/2021 7:23am
Laughing

Some of the comments I see in here...claims of what's good or bad or what brand is or is not "quality".

There are more than a few "cool guy" brands that make their stuff in China/Taiwan/Asia & sometimes even in the same factories and on the same production lines as brands that some in here scoff at. Some of that stuff comes stock on your Mega $ "Replica Editions", too.

I'm jus' sayin'...
13
mxtech1
Profile picture for user mxtech1
Posts
1968
Joined
7/21/2011
Location
Galesburg, IL, USA
mxtech1 10/8/2021 8:28am
10/8/2021 8:28am
mx317 wrote:
Why would you call it shit? It’s made of 7075-T6 which is the same as Renthal.
Same material, but that doesn't automatically guarantee JT is better than Renthal (or vice-versa)

heat treat processes could be different
material specification could be different (material microstructure, composition/chemical requirement)

All of these material properties are controlled by the engineering specifications for each company. When they source raw material from the steel mill, they will provide a spec range that must provide the correct microstructure and composition. Typically after the machining is complete, the heat treat process is done and that is another process that could have different outcomes. A more durable sprocket will have higher surface hardness as well as higher microhardness below the surface.
3
5
mx317
Profile picture for user mx317
Posts
5332
Joined
4/1/2008
Location
USA
mx317 10/8/2021 8:47am
10/8/2021 8:47am
mx317 wrote:
Why would you call it shit? It’s made of 7075-T6 which is the same as Renthal.
mxtech1 wrote:
Same material, but that doesn't automatically guarantee JT is better than Renthal (or vice-versa) heat treat processes could be different material specification could be different (material...
Same material, but that doesn't automatically guarantee JT is better than Renthal (or vice-versa)

heat treat processes could be different
material specification could be different (material microstructure, composition/chemical requirement)

All of these material properties are controlled by the engineering specifications for each company. When they source raw material from the steel mill, they will provide a spec range that must provide the correct microstructure and composition. Typically after the machining is complete, the heat treat process is done and that is another process that could have different outcomes. A more durable sprocket will have higher surface hardness as well as higher microhardness below the surface.
Didn’t say it was better, only that it wasn’t shit because I’ve used them.
3
Ridelow 10/8/2021 8:52am
10/8/2021 8:52am
FGR01 wrote:
Local to Madison, Wisconsin. Only used by people who'v been Munsoned. Fair Dinkum.
Ave is that you?
1

Pit Row

See All »
SilverSpurs
Profile picture for user SilverSpurs
Posts
560
Joined
2/5/2021
Location
Sarasota, FL, USA
SilverSpurs 10/8/2021 8:53am
10/8/2021 8:53am Edited Date/Time 10/9/2021 7:44pm
mxtech1 wrote:
Same material, but that doesn't automatically guarantee JT is better than Renthal (or vice-versa) heat treat processes could be different material specification could be different (material...
Same material, but that doesn't automatically guarantee JT is better than Renthal (or vice-versa)

heat treat processes could be different
material specification could be different (material microstructure, composition/chemical requirement)

All of these material properties are controlled by the engineering specifications for each company. When they source raw material from the steel mill, they will provide a spec range that must provide the correct microstructure and composition. Typically after the machining is complete, the heat treat process is done and that is another process that could have different outcomes. A more durable sprocket will have higher surface hardness as well as higher microhardness below the surface.
You don't know what you are talking about.

7075 T6 is a complete material specification for that aluminium alloy and will guarantee uniformity- ingredients, properties, method of processing, heat treatment- everything.
3
murph783
Profile picture for user murph783
Posts
1355
Joined
3/2/2011
Location
USA
murph783 10/8/2021 9:04am
10/8/2021 9:04am
Munson'd wrote:
Fuck me running, that’s a great price.
inthebadboycorner wrote:
Fuck me running.
Is that a local saying, or American?
Munson'd wrote:
I’ve heard other people say it, I assume it’s an American thing?
Or it’s cousin, fuck me sideways. I dunno I’m American and I use both
2
yota
Profile picture for user yota
Posts
1421
Joined
6/23/2008
Location
Crystal River, FL, USA
yota 10/8/2021 9:10am
10/8/2021 9:10am
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in that and had to change out buttloads of mild steel bolts that were marked as hardened or high strength. just cause it says 7075 T6 doesn't mean it is.

and the rocky mountain ad in the 1st post says JT Racelite, not JT Racing.
3
-MAVERICK-
Profile picture for user -MAVERICK-
Posts
66472
Joined
3/26/2015
Location
Ontario, CA
-MAVERICK- 10/8/2021 9:19am
10/8/2021 9:19am
yota wrote:
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in...
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in that and had to change out buttloads of mild steel bolts that were marked as hardened or high strength. just cause it says 7075 T6 doesn't mean it is.

and the rocky mountain ad in the 1st post says JT Racelite, not JT Racing.
Racelite is the name of the sprocket. JT Racing is engraved on the sprocket.

2
yota
Profile picture for user yota
Posts
1421
Joined
6/23/2008
Location
Crystal River, FL, USA
yota 10/8/2021 10:06am
10/8/2021 10:06am
yota wrote:
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in...
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in that and had to change out buttloads of mild steel bolts that were marked as hardened or high strength. just cause it says 7075 T6 doesn't mean it is.

and the rocky mountain ad in the 1st post says JT Racelite, not JT Racing.
-MAVERICK- wrote:
Racelite is the name of the sprocket. JT Racing is engraved on the sprocket.

I see. thanks for setting me straight.
1
AJ565
Profile picture for user AJ565
Posts
2337
Joined
3/12/2012
Location
San Antonio, TX, USA
AJ565 10/8/2021 10:06am
10/8/2021 10:06am
I’ve run them a few times. Since they are cheap they are great for testing different ratios. I only get about 15 hours out of them. They are 7075-T6 aluminum.
2
soggy
Profile picture for user soggy
Posts
8754
Joined
12/3/2018
Location
USA
soggy 10/8/2021 12:20pm
10/8/2021 12:20pm
Man the energy it must take for you guys to just think everything is a lie must be exhausting.
18
Sandusky26
Profile picture for user Sandusky26
Posts
3418
Joined
7/28/2021
Location
Eastern, NC, USA
Sandusky26 10/8/2021 12:30pm
10/8/2021 12:30pm
I’ve been running JT sprockets since the 70’s.
3
Lightning78
Profile picture for user Lightning78
Posts
6353
Joined
12/12/2007
Location
Huntington Beach, CA, USA
Lightning78 10/9/2021 11:19am
10/9/2021 11:19am
The sprockets in the link look a lot like the tag metals sprockets from about 10 years ago....or at least they reminded me of them
Sandusky26
Profile picture for user Sandusky26
Posts
3418
Joined
7/28/2021
Location
Eastern, NC, USA
Sandusky26 10/9/2021 2:10pm
10/9/2021 2:10pm
Lightning78 wrote:
The sprockets in the link look a lot like the tag metals sprockets from about 10 years ago....or at least they reminded me of them
Those were good sprockets
TeamGreen
Profile picture for user TeamGreen
Posts
37052
Joined
11/25/2008
Location
Thru-out, CA, USA
TeamGreen 10/9/2021 2:19pm
10/9/2021 2:19pm
My friend, Dieter, is very serious about his Sprockets!

1
1
Richy
Profile picture for user Richy
Posts
3093
Joined
7/18/2020
Location
UK, GB
Richy 10/9/2021 3:44pm
10/9/2021 3:44pm
yota wrote:
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in...
the chinese are famous for counterfeiting shit. there was a huge scandal about them putting fake markings on bolts. even the US Military got caught in that and had to change out buttloads of mild steel bolts that were marked as hardened or high strength. just cause it says 7075 T6 doesn't mean it is.

and the rocky mountain ad in the 1st post says JT Racelite, not JT Racing.
Was that the fake ARP's? I have a couple of friends who had con rods escape courtesy of those, bad times.
They even copied the little pack of grease that came with the bolts, looked literally identical.

Also, FYI to someone earlier, for it to be 7075 it must have a specific composition, strength and hardness etc. Likewise T6 is actually a dictated spec of heat treating, and it's the most commonly seen and is used by Renthal etc as well, so I doubt there'd be a difference there.

I know there's shit aluminium and shitty alloys around, I've seen plenty as I'm sure a lot of us have, but shitty 7075 shouldn't exist unless incorrectly claimed to be something it isn't.

Not picking fault, just saying, I don't see how it can be inferior to any other alloy sprocket bar the actual design.

Post a reply to: New JT aluminum sprockets?