Added reply in a thread KTM SX-F engine hesitates, stumbles 10/17/2020 6:27 PM

Look down in tank and see if fuel is bubbling or appears to be boiling. They have had some in-tank filters cracking and you will lose fuel pressure when this happens. It may only need a filter like Paw Paw said. I had this happen on my Husky.

Added reply in a thread Your ideal suspension 10/16/2020 11:39 AM

https://motocrossactionmag.com/bare-bones-looks-arent-everything-when-it-comes-to-fork-tubes/ Here is a good article by Bones Bacon on suspension coatings.

Added reply in a thread Your ideal suspension 10/16/2020 10:49 AM

I don't know Dan, but others above were saying EVO suspension.

Added reply in a thread Here is the 2021 450 Shoutout?? Deleted?? 10/16/2020 8:59 AM

I just came off a 2017 KTM 450SXF and then got a 2018.5 Husky Rockstar Edition (pretty much the 2019 Husky). I used the same Conevalves on both with three different setups. Enzo finally got it dialed. I now have a 2020 Yamaha I bought in August and with ... more »

Added reply in a thread Your ideal suspension 10/16/2020 8:17 AM

Send to Craig at Enzo in Texas. He usually has a fast turn around.

Added reply in a thread Your ideal suspension 10/16/2020 8:15 AM

Another vote for Enzo

Added reply in a thread Where should I go to live/ride over the winter? 10/15/2020 11:19 AM

Florida or south Alabama

Added reply in a thread Cone Valve Fork Valving 10/14/2020 12:10 PM

I went back and forth between blue and red and still never got the comfort I wanted from them. Craig Decker at Enzo in Texas removed the cone and cone valve adapter and used a conventional shim stack. It used the stock mid valve piston that is in there ... more »

Added reply in a thread Cone Valve Fork Valving 10/14/2020 10:53 AM

Have Enzo do a regular mid-valve stack and you will thank me later.

Added reply in a thread Xact Pro / Cone Valve Length 10/14/2020 10:50 AM

The older ones were 940mm. I saw where they shortened the forks on the Husky for 21.

Added reply in a thread Ferrandis on a new team, new bike. 10/13/2020 12:50 PM

Why will 2022 be so much better? The motorcycle industry here in the US of A has had a banner year in sales! There could be some money floating around because of this. Of course some contacts may run through next year that may not be renewed if that ... more »

Added reply in a thread Ferrandis on a new team, new bike. 10/13/2020 11:42 AM

BAM!

Added reply in a thread Its gonna be a long off season 10/12/2020 5:23 PM

GPs still going along with local racing. SX will be here before you know it.

Added reply in a thread Ferrandis training 10/12/2020 2:18 PM

Now just how would you know? Congratulations guys!

Added reply in a thread Crankcase saver bolt threads F'd 10/12/2020 9:16 AM

How deep are the threads? There may be enough on down in there to hold it.

Added reply in a thread Area riders you thought would be factory stars. 10/12/2020 8:44 AM

Some I've raced against that deserved more: Gene McCay, Furman Gray, Kevin Foley, Tommy Watts

Added reply in a thread Yzf 450 2020 front fork 10/12/2020 7:28 AM

Race Tech fork spring rate recommendations are lighter than both Factory Connection and Enzo on this bike. Race Tech said stock 5.0s for me, but FC and Enzo said 5.2N/mm

Added reply in a thread KTM Clutch Observation/Issue - Anyone Else??? 10/9/2020 9:09 AM

Sorry, just can't agree with this.

Added reply in a thread KTM Clutch Observation/Issue - Anyone Else??? 10/9/2020 6:45 AM

It seems backwards, but if the stack is shorter the spring force gets less because you are pulling up on the rear pressure plate with the spring. Think of when you pull the clutch in and it pushes in on the spring the stack comes apart so they will release. ... more »

Added reply in a thread 2020 yz450f problems 10/7/2020 6:42 PM

That’s not correct on putting the filter in backwards. The plain metal end pushed against the nipple that sticks out would shut off oil flow. A paper filter crushes very easy so it would not have to have a hole poked in it. It is reversed to most Honda’s ... more »