Best Handling bike you've ridden?

-eagle-
Profile picture for user -eagle-
Posts
1610
Joined
5/9/2008
Location
ZW
-eagle- 11/13/2008 5:44am
11/13/2008 5:44am Edited Date/Time 4/16/2016 9:12pm
93 cr 250 with pro action suspenders or either of the 96 cr's.
My 03 cr cuts insides like nothing i've ever ridden, especially coming off a yz 250.
I"d like to ride a late model rm 250, everyone says they have a motor like the 01 cr and handle like a dream.
Thats a great combo.
mayzo
Profile picture for user mayzo
Posts
330
Joined
10/13/2008
Location
AU
mayzo 11/13/2008 6:26am
11/13/2008 6:26am
My 89 CR125, dialed it in went racing. It was light, fast and so flickable. You could land 60ft up hill doubles, land with the brakes on, use the inside line, abuse the clutch and power on over the massive big down hill double near where I lived, it felt like sex on wheels. Honda got that one oh so right.
Larry
Profile picture for user Larry
Posts
5092
Joined
4/1/2008
Location
Fayetteville, GA, USA
Larry 11/13/2008 6:38am
11/13/2008 6:38am
1979 Maico 440 Magnum that my buddy raced. We switched bikes one weekend and I did not want to give him his Maico back.
For modern bikes I would have to say my son's 02 YZ 250. We did a little suspension work and that was the most precise handling bike I have ever ridden. You would see acceleration bumps but never feel them.
Adam43
Profile picture for user Adam43
Posts
3312
Joined
8/16/2006
Location
WF
Adam43 11/13/2008 7:24am
11/13/2008 7:24am
Small bike? 2001 Suzuki RM125. That thing was a razor, and it wasn't so fast that its lack of stability was an issue.

Big bike? 2002 Honda CR250. These bikes had absolutely no ill handling traits AT ALL.

The Shop

See All »
MXR
Profile picture for user MXR
Posts
3780
Joined
8/15/2006
Location
City, WA, USA
MXR 11/13/2008 7:49am
11/13/2008 7:49am
1979 Maico 250 with Works Performance shocks .
Highsider
Profile picture for user Highsider
Posts
7679
Joined
8/15/2006
Location
Way Toasty, IA, USA
Highsider 11/13/2008 7:57am
11/13/2008 7:57am
I know I live in the past, but can anybody confirm the 1983 CR250R was awesome in the handling and motor department, spanning several years and brand comparisons?

Jimi J
MXR
Profile picture for user MXR
Posts
3780
Joined
8/15/2006
Location
City, WA, USA
MXR 11/13/2008 8:09am
11/13/2008 8:09am
I had an 83 CR 480 ,it was bad ass . Handled pretty good , turned great and fast . I disconnected the rev limiter by unplugging a blue wire under the tank and it reved to the moon .
kawboy388
Profile picture for user kawboy388
Posts
985
Joined
4/2/2008
Location
Covington, TX, USA
kawboy388 11/13/2008 8:37am
11/13/2008 8:37am
I'm hoping the brand new 08 Suzuki RM-Z 450 that I bought last Monday is going to be the best handling bike I ever owned, we'll find out this weekend. Up to this point though I'd say it was my 87 CR 125, I never got so comfortable, so fast, on anything. Not only was it a totally different bike but I was moving up from my 86 KX 80.
slowvet
Profile picture for user slowvet
Posts
1905
Joined
4/1/2008
Location
San Marcos, CA, USA
slowvet 11/13/2008 8:38am
11/13/2008 8:38am
My 2000 YZ426 with RG3 suspension.
My 1980 YZ250G with Keystone suspension and a matched and blueprinted engine. That thing barked, it got stolen while I was in the hospital getting my second knee surgery. Fug'n thieves.....
Tiki
Profile picture for user Tiki
Posts
10639
Joined
8/1/2006
Location
Corona, CA, USA
Fantasy
766th
Tiki 11/13/2008 9:34am
11/13/2008 9:34am
Probably CRF150. Was the most fun to ride. My CRF450 is pretty good. I think I can identify the worst handling bikes easier then the best.

Worst 99 CR250
Suns_PSD
Profile picture for user Suns_PSD
Posts
989
Joined
4/1/2008
Location
Austin, TX, USA
Suns_PSD 11/13/2008 10:22am
11/13/2008 10:22am
2008 KTM 144 or 250SX.
Motomad
Profile picture for user Motomad
Posts
24
Joined
5/20/2008
Location
Mesa, AZ, USA
Motomad 11/13/2008 10:23am
11/13/2008 10:23am Edited Date/Time 11/13/2008 10:24am
1987 CR 250....but I had a small fortune into the dare thing.
Factoryphoto
Profile picture for user Factoryphoto
Posts
851
Joined
4/1/2008
Location
Northern California, CA, USA
Factoryphoto 11/13/2008 10:43am
11/13/2008 10:43am
Factoryphoto wrote:
94 yz 250 enzo susp
08 crf 450 RG3
rubarb wrote:
What class?
rubarb I race the othg club in expert class or normal gfi or cmc I would ride Intermediate.
Highsider
Profile picture for user Highsider
Posts
7679
Joined
8/15/2006
Location
Way Toasty, IA, USA
Highsider 11/13/2008 10:49am
11/13/2008 10:49am Edited Date/Time 11/13/2008 10:51am
I have nothing to add...just hit "submit" in error
user760a
Profile picture for user user760a
Posts
1206
Joined
9/15/2008
Location
Shelby, NC, USA
user760a 11/13/2008 11:35am
11/13/2008 11:35am Edited Date/Time 11/13/2008 11:37am
the best handeling bike I have ever ridden would probably be a CR125...but the best handeling modern 4 stroke (450 anyway) would have to be the 06 RMZ450 I briefly had. I would still be riding suzuki's because the bike turned like it was on rails...if only the motor had not been a defective piece of shit and blown up like most 05/06 RMZ450's eventually do
Trinitite
Profile picture for user Trinitite
Posts
1253
Joined
12/31/2007
Location
Pittsburgh, PA, USA
Trinitite 11/13/2008 11:48am
11/13/2008 11:48am
2006 YZ 125.
dirtbikersa 11/13/2008 11:50am
11/13/2008 11:50am
Best - 06 RM 250
Worst - 02 CR 250
G-man
Profile picture for user G-man
Posts
9251
Joined
4/1/2008
Location
Mesa, AZ, USA
G-man 11/13/2008 12:03pm
11/13/2008 12:03pm
81 RM125 Full Floater. Felt like a bicycle with a motor.

Pit Row

See All »
Highsider
Profile picture for user Highsider
Posts
7679
Joined
8/15/2006
Location
Way Toasty, IA, USA
Highsider 11/13/2008 12:06pm
11/13/2008 12:06pm
MXR wrote:
I had an 83 CR 480 ,it was bad ass . Handled pretty good , turned great and fast . I disconnected the rev limiter by...
I had an 83 CR 480 ,it was bad ass . Handled pretty good , turned great and fast . I disconnected the rev limiter by unplugging a blue wire under the tank and it reved to the moon .
Back in those years, my Honda-Yamaha shop had a good-sized motocross team. I picked one rider in particular to sponsor because he could make his CR480 holeshot every moto he entered and that ment the announcer mentioned his sponsoring shopWoohoo

Nice guy, too.

Jimi J
KlinesHill 11/13/2008 12:38pm
11/13/2008 12:38pm
1978 Maico 250...stuck like glue...LOVED THAT BIKE!!!
morrison100
Profile picture for user morrison100
Posts
43
Joined
8/12/2008
Location
Paducah, KY, USA
morrison100 11/13/2008 2:48pm
11/13/2008 2:48pm
My 09 Honda 450 pr2 sus. best handling before that my 06 Honda 450 pr2 sus
todder
Profile picture for user todder
Posts
1608
Joined
10/20/2006
Location
Sw, WI, USA
todder 11/13/2008 3:44pm
11/13/2008 3:44pm
Looks like the RM250 is the winner.
Racer92
Profile picture for user Racer92
Posts
17965
Joined
8/15/2006
Location
Central, TX, USA
Racer92 11/13/2008 4:11pm
11/13/2008 4:11pm Edited Date/Time 4/16/2016 9:12pm
todder wrote:
Looks like the RM250 is the winner.
Trust me, the bikes handle and turn awesome.




MX72
Profile picture for user MX72
Posts
30
Joined
4/1/2008
Location
USA
MX72 11/13/2008 4:18pm
11/13/2008 4:18pm
kawboy388 wrote:
I'm hoping the brand new 08 Suzuki RM-Z 450 that I bought last Monday is going to be the best handling bike I ever owned, we'll...
I'm hoping the brand new 08 Suzuki RM-Z 450 that I bought last Monday is going to be the best handling bike I ever owned, we'll find out this weekend. Up to this point though I'd say it was my 87 CR 125, I never got so comfortable, so fast, on anything. Not only was it a totally different bike but I was moving up from my 86 KX 80.
Rode mine for the first time last sunday, I think you'll be very happy.
J.Saunders144
Profile picture for user J.Saunders144
Posts
1216
Joined
4/1/2008
Location
St. Clair, MI, USA
J.Saunders144 11/13/2008 6:25pm
11/13/2008 6:25pm
my 03 cr125 was badass by far my favorite bike ive ever rode, didnt have power worth a shit but as long as you kept momentum you where set
mxpimp
Profile picture for user mxpimp
Posts
194
Joined
5/25/2008
Location
Seattle, WA, USA
mxpimp 11/13/2008 7:18pm
11/13/2008 7:18pm Edited Date/Time 11/13/2008 7:18pm
mxpimp wrote:
97 CR250
hammertime wrote:
lmao...your kidding right? that was the biggest piece of shit, tuning fork honda ever produced.

i'll say 98/99 yz 250's were unreal.
Loose wrote:
Thank god someone sees the light. I mentioned this bike in another post. Stiff, headshaking piece of shit. I used to end up on my ass...
Thank god someone sees the light. I mentioned this bike in another post.

Stiff, headshaking piece of shit. I used to end up on my ass asking myself 'what did I do wrong?'

98/99 YZ's were good 98/99 YZF's weren't.

Maybe mxpimp never let the clutch out?
It was a joke. HA HA
Never mind.
mike868y
Profile picture for user mike868y
Posts
132
Joined
4/1/2008
Location
USA
mike868y 11/13/2008 7:37pm
11/13/2008 7:37pm
Truthfully? My KX85 race bike from the beginning of last year when I actually fit it. The suspension was set up perfect, I fit it perfect, and the applied triple clamps suited me really well. I loved that bike ( I think it was a 2007 model). My race bike from this year (restored 2006 RMZ250f) just doesn't compare even with perfectly dialed in Factory Connection suspension. The steel frame just doesn't cut it.
yourmumsfat
Profile picture for user yourmumsfat
Posts
12
Joined
10/22/2008
Location
Eketahuna, AF
yourmumsfat 11/13/2008 8:11pm
11/13/2008 8:11pm
gas gas
yourmumsfat
Profile picture for user yourmumsfat
Posts
12
Joined
10/22/2008
Location
Eketahuna, AF
yourmumsfat 11/13/2008 8:15pm
11/13/2008 8:15pm
john1753 wrote:
gasgas sucks bro.
na man they are the best man they are awesome. they like go real fast and stuff.

Post a reply to: Best Handling bike you've ridden?