Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 2/5/2021 2:29 PM

she's about 97% done. I just have some work to do to get the lights hooked up and working, and I need a skidplate.

... more »
Added reply in a thread 1994 GASGAS EC 125 2/1/2021 9:23 PM

Here’s everything I could find on that bike...

... more »
Added reply in a thread 1994 GASGAS EC 125 2/1/2021 12:33 PM

Dude i am SO jealous! those are such cool bikes. I can't wait to see how it turns out!

Added reply in a thread Who else got crushed in Fantasy? 1/20/2021 7:16 AM

I got 10 points out of a possible 133 on RMfantasy, and somehow, I'm still leading my group.

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 1/13/2021 9:32 AM

i didn't, but i can get you his info!

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 1/13/2021 6:37 AM

Cool stuff coming from Italy! I found a guy who was able to reproduce perfect replica CRE Graphis AND the Marzocchi Magnum45 fork decals that have eluded me for three years... Also scored a lot of Acerbis ISDE numbers from a friend ... more »
Added reply in a thread We Need More Of This To Expand Our Sport 11/5/2020 6:17 AM

Safety third

Added reply in a thread Let’s see your favorite older body style Yamaha’s 9/16/2020 6:35 AM

I'm with you! the 96-01 bikes will always have a special place in my memory, particularly the 99-01's

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 9/4/2020 6:41 AM

Wow! great job! that thing looks awesome! UFO still sells the plastic fork guards for those forks, they're the YZ shape, but have different tabs to mount them to the triple clamp. Who did your graphics? that's just about all i'm waiting for on mine.

Added reply in a thread If you were a factory mechanic for an AMA Pro rider . . . 8/25/2020 6:04 AM

I'd adjust the clickers, swap the pull rods, and change the ignition curve for a little extra torque....then pass out stickers to fans

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 6/15/2020 6:22 AM

Got a lot done this weekend! the motor is assembled, cleaned up and back in the frame. I put the tank and seat on so I could sit on it and get the bars ... more »
Added reply in a thread Big Uh-Oh 5/15/2020 6:29 AM

A wire wheel should take it down to the point where you can read the number. I have had this same problem getting a few frames powdercoated in the past. you can also use the motor number to help identify the bike. i bought an RM250 from the Motoworldracing.com ... more »

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/25/2020 11:23 AM

Starting to get the engine buttoned up. installed the stator, lighting coil, and flywheel weight. thanks to Ron Ribolzi at E-line for taking the time to find me the gaskets for a product that's been discontinued for almost 20 years! ... more »
Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/22/2020 6:44 AM

Actually it's closer than it looks. I had a stupid little getoff at King of the Motos (not racing) and broke my trapezium. three screws and a nasty pin later it's almost good to go. got the cast off on ... more »
Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/22/2020 6:32 AM

Here's the subframe extension that was reproduced from an original one. the fab guy was a little too detailed and even put the tab on for the helmet holder, which i'll probably cut off. this thing is heavy, but will hopefully ... more »
Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/22/2020 6:21 AM

Very cool! you don't see many of those around anymore. I know of maybe two or three other original Italian imports in the US and that's it.

Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/21/2020 6:23 AM

Built a much brighter headlight at work. Sector Seven, the UTV brand in the Pro Moto Billet family, makes a set of UTV light mirrors, and I was able to re purpose some scrap pieces for my light. these two LED boards ... more »
Added reply in a thread Honda CRE250 Enduro-Let's call it 97% Finished 4/21/2020 6:18 AM

I've still been working through this whole quarantine mess, so I haven't had as much time to work on this as I'd like, but I recently got motivated! I've ordered what I hope will be ... more »
Added reply in a thread 5 Photos: Tool Box Edition 3/31/2020 7:30 PM

... more »
Added reply in a thread Renthal FatBar 36 1/20/2020 4:12 PM

Was a Renthal guy forever, then I gave the FasstCo Flexx bars an honest chance, now I can't go back to anything else.....