Recent Activity
All
fullysicmate Added a reply to Gas Gas Bike Designs
10/22/2021 2:56am Fresh one.. 
More »
fullysicmate Added a reply to Ktm under seat electrical connector
10/12/2021 2:55pm It is the same type of plug that is used for the fuel pump no newer models but if it was the fuel pump on this bike it wouldn't run. Trace it out and see where it goes.
fullysicmate Added a reply to Just bought a new Gas Gas EC350F, what to do
10/11/2021 1:29pm Very nice, I like the all red look too, that's what I have ordered for mine. Where did you get the shroud sticker?
fullysicmate Started a new thread Gas Gas EC350F - Setting Sag
10/11/2021 1:27pm Hi All, I just bought the bike new, the sag was about 60mm out of the showroom, the manual says to set it at 110mm which is normally my preference as well. However, with the spring undone any more than 100mm sag, the spring is free/loose on the shock. I will do a few hours riding and re-check the sag...
This forum thread has 3 replies.
racerhansen Liked a reply to forum topic Definitive GASGAS-KTM parts differences thread
10/7/2021 1:27pm
At my local gasgas dealer. Part # A54007013100
This forum topic has 54 replies.
fullysicmate Added a reply to Just bought a new Gas Gas EC350F, what to do
10/5/2021 2:24pm Yeah I'll get the plastic and a thermo fan as well, mostly riding single trail in the forest.
fullysicmate Started a new thread Just bought a new Gas Gas EC350F, what to do
10/1/2021 11:05pm I have bought the new bike but can’t ride for a couple of weeks due to injury. I have ordered hand guards and a skid plate, what else do you recommend? Any previous/current owners please chime in. I sold a 19 FE501 and 17 FC350, and currently have a 450sxf as well. I was thinking about taking off the standard...
This forum thread has 6 replies.
fullysicmate Added a reply to 2023 KTM models?
9/27/2021 1:26pm I don't like those cam chain tensioners.
fullysicmate Added a reply to Sorry Gypsy, but Jett not as talented as James Stewart
9/16/2021 7:28pm B Lennys dream 
ThePizzaCobra Liked a reply to forum topic Will Deegan Leave KTM?
9/16/2021 5:04pm
Can’t be any cockier than Austin Forkner. You know, the guy with a “Sex, breakfast of champions” butt patch who proceeded to weed himself out of the championship the same day.
This forum topic has 98 replies.
fullysicmate Added a reply to Sorry Gypsy, but Jett not as talented as James Stewart
9/16/2021 4:30pm I say Stew is better as well, but it's too hard to compare now anyway. Jett is competing against a full field (almost) of farmed mx kids who have been brought up to be racers since they were babies, including himself. James was one of the first kids that fit this description, his competition was not on the level of...
Jstarling81 Liked a reply to forum topic Definitive GASGAS-KTM parts differences thread
9/15/2021 4:33pm
I did a conversion from KTM to GasGas Items I changed - - Gas Tank - Airbox (airbox is same, but I went from Orange to White/Black like OEM GasGas) - Swing arm is different, but I stayed with KTM swing arm… I am in the understanding that the KTM one is stiffer.. could be wrong but I have a GasGas and I can’t feel the different from each bike. - Plastic of course - I Powdercoated the frame Red, I got the GasGas Color code and did the valve cover on engine and frame. Everything else was the same!
This forum topic has 54 replies.
dbx33 Liked a forum topic Definitive GASGAS-KTM parts differences thread
9/15/2021 3:01pm
ok boys.... who's got both new scooters and can tell down to the washers and bolts whats actually different and what can/cant swap? It looks like tank and shrouds are different, not sure if you can just swap the tank and shroud plastic over of it the mounts are different as well? Im particularly interested in what the setup is on the triple clamps for offset and angles and if suspension valving and stroke is the same as husky or the ktm setup? im either buying a GG or another sxf as a backup bike for this winters training trip...
This forum topic has 54 replies.
fullysicmate Added a reply to Definitive GASGAS-KTM parts differences thread
9/15/2021 2:56pm Are the braketec brake pads compatible with the brembo pads off the ktm/husky?
racerhansen Liked a reply to forum topic Definitive GASGAS-KTM parts differences thread
9/15/2021 2:55pm
No, the shape and holes are different.
This forum topic has 54 replies.
fullysicmate Added a reply to Definitive GASGAS-KTM parts differences thread
9/14/2021 2:55pm do the ktm shrouds/tank fit on the gas gas tank and vice versa?
fullysicmate Added a reply to Definitive GASGAS-KTM parts differences thread
9/14/2021 1:15am Looks like the tanks are identical other than the cap so I suspect you could swap tanks and shrouds no worries...
fullysicmate Added a reply to Pulp mx 8/31
9/1/2021 8:55pm I want to see GL back on Pulp show like the good old days, let them argue this issue out together, I am sure Steve would back pedal and both would get valid points across. I have no problem with the take from either guy. Get the Red Bull Vodkas ready for GL too, they have to make up..
bh84 Liked a reply to forum topic Pulp mx 8/31
9/1/2021 8:43pm
As a Canadian I can tell you whoever is President has no bearing on my vaccine opinions, but in my research I found a few interesting notes. 1. Vaccine mandates helped the US win the revolutionary war, some guy named George Washington thought it was a good idea for his soldiers to be vaccinated against smallpox 2. Thomas Jefferson was the first president to enact a vaccine mandate to the public. 3. James Madison, the guy who wrote the US constitution, also founded the US Vaccine agency 4. The Supreme Court ruled in 1905 that vaccine mandates are legal and...
This forum topic has 103 replies.
GoggleFiend904 Liked a reply to forum topic Suspension set-up for high speed soft coarse sand
8/31/2021 1:10pm
Normally with sand you would slow your rebound down, but with those speeds I’m thinking you would want to speed it up. Especially if you get wobbles at higher speeds. Stiffer compression definitely looks to be going in the right direction also
This forum topic has 3 replies.