Recent Activity
All
313 Added a reply to 23+ 350 gearing
8/5/2024 2:43am For me +1 help a lot. It is something you have to try.. For me I felt like I needed little better/quicker pickup when using 3rd gear in corners. Im light weight and I can get away with using 3rd gear in most corners. If you use 2nd gear in corners then adding a tooth wouldnt help..
More »
313 Added a reply to 23+ 350 gearing
8/4/2024 2:18am I like 14/53 gearing on my 24 350. Mostly ride sand tracks.
313 Added a reply to KTM 2023 Suspension Conclusions.
2/27/2023 6:52am Im running Technical Touch (BE) KYB A-kit set for my ´23 350sxf. The new KYB shock for new model is based on Kawasaki 2020 or 2021 model I think. Im not sure if this kit is sold on US or not? My setup is for Expert level and 70kg. I have used KYB A-kit for a long time. 2019-2022 my...
Elliot Liked a reply to forum topic Bench Racing - Motocross of Nations Free Practice and Qualifying Races
9/24/2022 8:25am
Content cannot be rendered.
This forum topic has 645 replies.
TahoeVetMX Liked a reply to forum topic 2023 KTM 350 SX-F
7/11/2022 11:46am
Ok here is my first ride and race report on the new 2023 FC350. I raced at Washougal with zero time on the bike at practice. I raced 5 motos for the weekend. During morning practice, I took 3 laps on the 23 and 3 laps on my 22 FC350 that has a fully built engine. I decided to ride the 23 as it has more bottom end power and better throttle response. After riding the bike all weekend, I would say it is a very big improvement in the power category. I had plenty of power everywhere! The handling...
This forum topic has 728 replies.
Ktmnorway Liked a reply to forum topic 2023 KTM models?
7/15/2021 5:49am
According to a dutch engine builder for one of the MXGP teams the current SXF250 factory bikes over there that run the 2023 spec engines are pushing over 3hp more than with the 2019- spec engines. This must mean a significant difference in stock platform aswell.
This forum topic has 504 replies.
313 Added a reply to WP KYB Conversion oil level
6/17/2021 11:42am
yz763 Liked a reply to forum topic Should have got a 350 years ago...
11/17/2020 1:40am
No magic but there is a technique to riding this bike. If your technique of riding this bike matches your avatar, stick to riding your air cooled trail bikes.
This forum topic has 931 replies.
Used demo set for sale https://oneclick.com.ee/shop/used-suspension/xact-pro-8950/
313 Added a reply to 2019 ktm 350 won't start
7/3/2020 2:14am If the problem is with fuel pump then you shouldnt hear it whir then you push the start button. If its electrical fault then the FI light will blink fault codes. If the FI light doesnt blink after trying to start then check if the airfilter is ok. If the airfilter let through dirt, then piston ring will get stuck...
313 Added a reply to FMF exhaust for 2020 KTM SXF350
3/30/2020 12:28am I replaced the stock exhaust with FMF slip-on on my 350sxf. The stock was without the cone inside. It made more noise without it but added a little mid and low end pull. The problem for me was that it wouldnt pass the sound test in races. With FMF I feel like I lost just a little low end hit...
313 Added a reply to KYB insert vs Cone Valve
3/20/2020 2:09am I give my little comparison.. I had cone valves with trax since 2015. 2019 season I had aer cone valves and supertrax. At the end of 2019 I switched to technical touch kybs internals and a-kit kyb shock. Riding KTM 350SXF, midpack A class rider. Aer cone valve I would say the cone valves were pretty good and also the...
313 Added a reply to KYB insert vs Cone Valve
3/19/2020 7:09am You will love these forks 
Ive had cone valves and aer cone valves. These techincal touch kybs are very good out of the box.
Ive had cone valves and aer cone valves. These techincal touch kybs are very good out of the box.
313 Added a reply to 2019 KTM Spring Conversion Worth It ??
10/10/2019 11:54pm Ive been running CV since 2015 and they are solid. This season I bought technical touch KYB conversion kit just to try something new. I like it much better than CV. Much more comfort and works well on different track conditions without any changes. It was 1200eur in europe. 
.
.
313 Added a reply to Recommended Setting for WP cone valve
8/9/2019 7:04am If I remember correctly the standard setting for EU 16-18 cone valves was.. Comp: 12 RB: 15 Preload: 0 3rd line I used this setting for hardpack: Comp: 15 RB: 12 Preload: 0 2nd line
313 Added a reply to 2019 KTM 350 SXF Build (Tested)
8/7/2019 3:29am I have been messing with the new shock settings a lot. I did revalve the shock because it felt too soft for me. It got better, but still struggled to find good settings. In my first impression I turned the supertrax off and thought its not for me. Now after a lot of testing I turned it on.. 20clickers actually...
313 Added a reply to 2019 KTM 350 SXF Build (Tested)
7/21/2019 10:30pm
313 Added a reply to 2019 KTM 350 SXF Build (Tested)
7/21/2019 10:28pm Did you revalve the new gen. shock also? I did revalve the shock. Little more highspeed needed in my opinion. Not 100% happy yet, but closer to what Im looking for. What shock settings did you got from enzo? Would be interesting to know what direction they recommened..
313 Added a reply to 2019 KTM 350 SXF Build (Tested)
6/14/2019 6:51am I rode the old trax for many years with 350sxf. The old trax had less comfort on little chop in my opinion. Other than that there isnt much difference. With old trax I had the trax system turned almost off (0.5). With new supertrax I also didnt like the trax system feeling, so I turned it almost off. My setup...
313 Added a reply to 2019 KTM 350 SXF Build (Tested)
6/14/2019 1:51am I have also supertrax shock and aer cone valves. Curious what settings did you got to test and on which condition/tracks?