Recommended Setting for WP cone valve

Ryder 105
Profile picture for user Ryder 105
Posts
2
Joined
8/8/2019
Location
Culloden, GA US
Ryder 105
I need a recommended setting for my WP suspension cone valve, it’s for hard pack tracks, I weight 125 lbs. bike is a husky tc 125
|
Motohead279
Profile picture for user Motohead279
Posts
249
Joined
4/1/2008
Location
Ruskin, FL US
Motohead279 8/8/2019 2:50pm
8/8/2019 2:50pm
Ryder 105 wrote:
I need a recommended setting for my WP suspension cone valve, it’s for hard pack tracks, I weight 125 lbs. bike is a husky tc 125
Are they revalved?

If not they will probably be way too stiff.
kieran_macca 8/9/2019 12:28am
8/9/2019 12:28am
I just had cone valves set up for my TC125 @ 165lbs, had to go with a smaller spring (3.8 I think) and different valve setting and lower oil level.
Send them to a suspension company and get them set up for you.
313
Profile picture for user 313
Posts
39
Joined
1/4/2015
Location
EE
313 8/9/2019 7:00am
8/9/2019 7:00am Edited Date/Time 8/9/2019 7:04am
If I remember correctly the standard setting for EU 16-18 cone valves was..
Comp: 12
RB: 15
Preload: 0
3rd line

I used this setting for hardpack:
Comp: 15
RB: 12
Preload: 0
2nd line
yzrider53
Profile picture for user yzrider53
Posts
163
Joined
5/30/2012
Location
Walnut Creek, CA US
yzrider53 8/9/2019 5:35pm
8/9/2019 5:35pm
The rebound setting depends on the cone float. Typically 14-18 depending on the float if you have the standard rebound valving that the CV's come with.
The compression you'll have to play with. My 2 sets that I have are 16-18 out.

Are these brand new or did you buy them used?

Post a reply to: Recommended Setting for WP cone valve