Loading bikes in tall trucks.

Shawnh
Posts
60
Joined
12/18/2018
Location
Brighton, CO, USA
12/11/2025 11:42am
Shawnh wrote:
I have a lifted Ram 2500 with a 6.5' bed and always used the ramp and bike stand method until a few months ago.  I picked...

I have a lifted Ram 2500 with a 6.5' bed and always used the ramp and bike stand method until a few months ago.  I picked up the RevArc Smart step and have been very happy!  I just start the bike and walk it up the steps, super easy and very convenient.  I load my bike diagonally and just run the straps to my foot pegs, bike doesnt move at all during transport and there is almost zero tension on the suspension. I like this setup because it doesn't take up any extra bed space and is less hassle than 2 ramps.  rev arc smart step system 750x750 0.jpg?VersionId=PszbyU5SP3L3QZA8iVA6Yn

 

rev arc smart steps 750x750 0
Jkawi wrote:
If you are starting the bike anyways, why don't you just ride it in? No offense, but that thing is massive and looks to be more...

If you are starting the bike anyways, why don't you just ride it in? No offense, but that thing is massive and looks to be more of a hindrance than a help. Rather have 2 ramps.

Nope its very small and way less hassle than 2 ramps, plus it makes for easy unloading.  Riding up the ramp is fine but a bit risky after a long day of moto at my age, lol.  This thing weighs less then my folding ramp and is easy to put on and take off, one of my favorite purchases in a while!  Wifey likes it better too because she always hated watching me unload stepping down off the truck.  

mb60
Posts
5721
Joined
3/7/2010
Location
GRAPEVINE, TX, USA
12/11/2025 12:07pm Edited Date/Time 12/11/2025 12:07pm

Use a small utility trailer and save yourself the frustration. If I remember right you are over 60 don't risk a fall. 

1
1
rshelbygt
Posts
96
Joined
4/11/2014
Location
Blythewood, SC, USA
12/11/2025 12:19pm

When necessary, I run my front tires of my truck up on some automotive ramps. I use a standard ramp and step on my bike stand to load the bike into the bed. I have the bike running and walk it up the ramp.IMG 3951 1

3

The Shop

mxaniac
Posts
697
Joined
9/9/2019
Location
Airway Heights, WA, USA
12/11/2025 3:08pm
rshelbygt wrote:
When necessary, I run my front tires of my truck up on some automotive ramps. I use a standard ramp and step on my bike stand...

When necessary, I run my front tires of my truck up on some automotive ramps. I use a standard ramp and step on my bike stand to load the bike into the bed. I have the bike running and walk it up the ramp.IMG 3951 1

Nooooooooo

My dear friend recently passed from ALS this summer, I'm going to tell on him. He moved from CA to Eastern WA about 15 years ago, and let's just say we value ruggedness and independence more here. He had just joined the company I worked for and it came out that he rode, so I invited him to the track. He shows up in these little pink short shorts and flip-flops and proceeds to drive his truck on ramps, which isn't always easy in gravel, and makes quite the spectacle trying to unload. The while parking lot was filled with dust and the sound of his revved out truck engine as he tried to get up on the sliding ramps.  He was already in his 50s, not exactly svelt, in those ridiculous flip flips and shorts and then this. He definitely had made an entrance, just not a good one! I rushed over with my ramp, unloaded his bike, and told him to NEVER PARK NEXT TO ME AGAIN. We had a lot of good laughs over that one. Great man, awesome human being, not great at first impressions.

3
neverwas
Posts
2796
Joined
8/17/2006
Location
Tucson, AZ, USA
12/11/2025 3:38pm
wwdiii wrote:
I’m kicking around the idea of taking the tool box off my 2500 Ram truck with 6 ft bed.  My tool box is a junk box...

I’m kicking around the idea of taking the tool box off my 2500 Ram truck with 6 ft bed.  My tool box is a junk box now days. I think I can do without it.

I’ve been using a receiver hitch carrier or my open trailer to haul.  I’d like to be able to close my tail gate with my bike in the back and haul our 37 ft RV.  Had my head up my ass, bought an RV a few years back instead of a toy hauler.

My truck doesn’t have a lift but 2500 Ram trucks are off the ground.  Tires I’m running are a tick over 34 inches.  So I’m off the ground some.

I haven’t put a dirt bike in the back of a truck since the mid 80’s lol.  Always had a trailer.  I’d guess I’d need a 7ft ramp as tall as my truck is.  Ramp with steps or some type of step to get on the tail gate.  I see guys doing it at the track all the time, but I’m not as young as I used to be.

I need to think this through before I jerk the tool box out of my truck and throw 300 bucks or more at a Z-trac rails and chocks.  Best I can tell diagonally my bike should fit and be able to close the tail gate.

Comments please, Thanks Billy

Jkawi wrote:
I have a ram 3500 with 35's on it (no lift or anything). I am 6ft and I run it up the ramp so I can...

I have a ram 3500 with 35's on it (no lift or anything). I am 6ft and I run it up the ramp so I can walk past the box and I can still reach up to the bars. Grab the one pre-hooked strap you left before you went for the push and hook it on the bars so the bike can lean without falling. Climb up into bed and strap down. either that or ride it in if it was running. I don't like to start it cold just to ride up the ramp.

This what I do, super easy with the vintage bike or trials bike, but manageable with a taller bike.

Kelz87
Posts
1396
Joined
7/21/2018
Location
Phoenix, AZ, USA
12/11/2025 3:51pm

IMG 1515 Original 0I had some big ass folding ramps I got from FB marketplace, definitely made loading easier but kinda cumbersome. I’d usually just ride right up the thing 

2
bodycast
Posts
429
Joined
1/18/2020
Location
Monroe, NC, USA
12/11/2025 5:10pm Edited Date/Time 12/11/2025 5:11pm

I completely gave up on walking a bike up a ramp after a day of riding.  For the Tacoma I pull a 6×9 enclose trailer and I have a 99 sierra that I put lowering shackles on specifically to make getting a bike in easier lol.  Sad what being 5'8 and getting older has done to me.

5
Phil109
Posts
640
Joined
7/7/2019
Location
Montgomery, TX, USA
12/11/2025 6:57pm

My bike has a rekluse clutch on it. Makes riding and loading up a bike 90% easier lol.  On any sort of load up I start it, click into 2nd and motor it on up with hardly any pushing Wink

Gworm
Posts
2854
Joined
4/5/2017
Location
Monett, MO, USA
12/11/2025 8:05pm
I am 5'7", 52 with joints that are falling apart and I have a newer F250 on 35s, so very similar with a tall tailgate.  This...

I am 5'7", 52 with joints that are falling apart and I have a newer F250 on 35s, so very similar with a tall tailgate.  This is what I felt was safest to use, long enough to not feeling like you are pushing the bike straight up, and wide enough to be stable.  They also fold relatively flat, so not a whole lot of space used. I just added strips of what looks like skateboard deck tape to the steps and top for traction which worked great.  It was an easy solution, and at $50, not the end of the world.  I have since moved onto a Motojack Rack, but that doesn't help you as you are using your receiver.

Step 
 

I use one of these as well. 

You can also use it as a bike stand for 2 bikes. 

2
wwdiii
Posts
2580
Joined
4/15/2019
Location
League City, TX, USA
12/12/2025 7:54am

Since I have a 7 ft Tri fold ramp I use with my receiver hitch carrier.  Which is heavy duty, with a slight arc to it.  I paid way more for the Tri fold ramp than my hitch carrier. 

After looking at some of the step platforms for lack of better terms some of the guys are using.  Along with already having a good ramp.  I might try something like this, with adjustable legs and 4 ft long.  Almost like a ramp to walk up.  Not sure how it would work but worth a try.   If I had room to keep my trailer here at my house I wouldn’t be worrying about this.  I have a really nice 16ft dove tail trailer rigged up for hauling bikes and my wife’s SXS we keep it in storage.  Which is not all that close and a pain in the ass to get in and out.

IMG 0138.png?VersionId=Isr

 

1
sdmx
Posts
405
Joined
10/30/2013
Location
Oceanside, CA, USA
12/12/2025 8:05am
jmo443 wrote:

Get a hitch mount set up for the back of the rv and put a bike hauler on there. Just another idea. 

This^

wwdiii
Posts
2580
Joined
4/15/2019
Location
League City, TX, USA
12/12/2025 8:33am
jmo443 wrote:

Get a hitch mount set up for the back of the rv and put a bike hauler on there. Just another idea. 

sdmx wrote:

This^

I’ve looked into it a using a receiver hitch hauler for my RV.  I already have one I’m using now with my truck.  I’ve read where some haul bikes that way.  My 37 ft bumper pull has a rear receiver hitch buts its not rated for much, I think 150 pounds or so.  Everything I read says it throws you weight ratio off front to back.  Pretty much what I’ve read so far most say don’t do it, but I don’t know.  

zippytech
Posts
1532
Joined
9/8/2018
Location
Bethesda, OH, USA
12/12/2025 8:35am

I don't understand why all the trucks today are so high and big to begin with.

10
1
Sparkalounger
Posts
1725
Joined
4/1/2008
Location
Minneapolis, MN, USA
12/13/2025 7:45am

I never used a ramp "in my prime". Grab end of bar with right hand and bottom of fork leg with left and lift front onto the gate.

Grab same bar end, but with left, grab swing arm at axle with right, lift with legs and up she goes.

I always said, "the day I need a ramp is the day I should stop riding".

LOL. Im now 49.

Been without an mx bike for 15 years (just trials).  Just bought a new Husky 350. Service kid asks if I need a ramp, I confidently say, "Im good" then proceed to throw my back out within 30 seconds of touching my new bike!   Wife was real impressed... 🤣

Thinking about that step ramp...

10
MX Dad #27
Posts
929
Joined
4/1/2008
Location
Ankeny, IA, USA
12/13/2025 7:51am
Shawnh wrote:
I have a lifted Ram 2500 with a 6.5' bed and always used the ramp and bike stand method until a few months ago.  I picked...

I have a lifted Ram 2500 with a 6.5' bed and always used the ramp and bike stand method until a few months ago.  I picked up the RevArc Smart step and have been very happy!  I just start the bike and walk it up the steps, super easy and very convenient.  I load my bike diagonally and just run the straps to my foot pegs, bike doesnt move at all during transport and there is almost zero tension on the suspension. I like this setup because it doesn't take up any extra bed space and is less hassle than 2 ramps.  rev arc smart step system 750x750 0.jpg?VersionId=PszbyU5SP3L3QZA8iVA6Yn

 

rev arc smart steps 750x750 0

This. I have the same set up!

RDnutz
Posts
1173
Joined
2/13/2021
Location
Dolores, CO, USA
12/13/2025 8:56am

I tried all the ramps over the years (including Step Ramp- scary!) but at 67 y/o, 2 replaced knees and multiple joint and back problems, no combination of ramps, pushing, riding, etc. are safe for me. I decided to get a lower truck. 1st try was a Maverick when they came out but wasn't a good fit for many reasons. A friend has an older Nissan Frontier and weighs 200lbs + with a huge gut and can use a short ramp and walk a bike right up the ramp as he stays on the ground next to the bed rolling it in. Found out a couple years ago Nissan still made a King Cab with 6' bed so went for a test drive and ended up buying a 2024 2 years ago. Perfect for all my needs including hauling bikes.

2
early
Posts
10123
Joined
2/13/2013
Location
University Heights, OH, USA
12/13/2025 9:18am
wwdiii wrote:
Since I have a 7 ft Tri fold ramp I use with my receiver hitch carrier.  Which is heavy duty, with a slight arc to it...

Since I have a 7 ft Tri fold ramp I use with my receiver hitch carrier.  Which is heavy duty, with a slight arc to it.  I paid way more for the Tri fold ramp than my hitch carrier. 

After looking at some of the step platforms for lack of better terms some of the guys are using.  Along with already having a good ramp.  I might try something like this, with adjustable legs and 4 ft long.  Almost like a ramp to walk up.  Not sure how it would work but worth a try.   If I had room to keep my trailer here at my house I wouldn’t be worrying about this.  I have a really nice 16ft dove tail trailer rigged up for hauling bikes and my wife’s SXS we keep it in storage.  Which is not all that close and a pain in the ass to get in and out.

IMG 0138.png?VersionId=Isr

 

That looks like a good setup, plus like the other guy said gives you a bike stand or bench to sit on. 

sdmx
Posts
405
Joined
10/30/2013
Location
Oceanside, CA, USA
12/13/2025 9:27am
jmo443 wrote:

Get a hitch mount set up for the back of the rv and put a bike hauler on there. Just another idea. 

sdmx wrote:

This^

wwdiii wrote:
I’ve looked into it a using a receiver hitch hauler for my RV.  I already have one I’m using now with my truck.  I’ve read where...

I’ve looked into it a using a receiver hitch hauler for my RV.  I already have one I’m using now with my truck.  I’ve read where some haul bikes that way.  My 37 ft bumper pull has a rear receiver hitch buts its not rated for much, I think 150 pounds or so.  Everything I read says it throws you weight ratio off front to back.  Pretty much what I’ve read so far most say don’t do it, but I don’t know.  

I stand corrected.  That is a pretty long trailer.  I am a CPA, not an engineer.  I will stick to taxes.

1
wwdiii
Posts
2580
Joined
4/15/2019
Location
League City, TX, USA
12/13/2025 11:56am
sdmx wrote:

This^

wwdiii wrote:
I’ve looked into it a using a receiver hitch hauler for my RV.  I already have one I’m using now with my truck.  I’ve read where...

I’ve looked into it a using a receiver hitch hauler for my RV.  I already have one I’m using now with my truck.  I’ve read where some haul bikes that way.  My 37 ft bumper pull has a rear receiver hitch buts its not rated for much, I think 150 pounds or so.  Everything I read says it throws you weight ratio off front to back.  Pretty much what I’ve read so far most say don’t do it, but I don’t know.  

sdmx wrote:

I stand corrected.  That is a pretty long trailer.  I am a CPA, not an engineer.  I will stick to taxes.

I’ve thought about putting my receiver hitch on the back and load a bike up, it has a receiver hitch.  But it’s rated 150 pounds so I decided not to even try it.

I should have and could have bought a toy hauler.  Our plan was to do some serious travel for extended periods once I retired.  Heck we really haven’t even used it.  It’s been setting in the driveway of our lake house for several years.  I really shouldn’t have bought it period.  Wife’s father was old/sick for few years.  Messed up our travel plans.  He’s passed but she’s had to deal with family crap.  Should be hitting the road after the first of the year.   Therefore the bike in the back of the truck with the tailgate up.

Years back I’d just bought a long bed truck.  Now days trucks are a lot of money and I’ve done pretty well. It’s a chunk of change for a new 2500 or 3500 4x4.

2
Dan-The-Man
Posts
2066
Joined
7/27/2015
Location
Bakersfield, CA, USA
12/14/2025 11:37pm

I use the stand next to my ramp but sometimes I just ride it up. When I take my CBR in the back of my truck, I have no choice but to ride it up. I won’t lie I was a little nervous the first time with the aluminum ramp, I had visions of it folding in half under the 600+ pounds but it’s held up.

1
EAmato88
Posts
623
Joined
1/23/2019
Location
Egg Harbor City, NJ, USA
12/15/2025 5:59am Edited Date/Time 12/15/2025 5:59am

Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the ramp up on the left side of the tailgate, push the bike up close to the bed rail of the truck while reaching up and walking along side of the truck. When the bike is in the bed, gently lean it on the bed rail, and climb into the bed to strap it down. You dont need two ramps, dont need a step stool, just reach up and push

2
1
wwdiii
Posts
2580
Joined
4/15/2019
Location
League City, TX, USA
12/15/2025 6:27am
EAmato88 wrote:
Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the...

Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the ramp up on the left side of the tailgate, push the bike up close to the bed rail of the truck while reaching up and walking along side of the truck. When the bike is in the bed, gently lean it on the bed rail, and climb into the bed to strap it down. You dont need two ramps, dont need a step stool, just reach up and push

Never thought of that.  Guess if a guy was tall enough he could do it.  

1
EAmato88
Posts
623
Joined
1/23/2019
Location
Egg Harbor City, NJ, USA
12/15/2025 7:28am
EAmato88 wrote:
Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the...

Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the ramp up on the left side of the tailgate, push the bike up close to the bed rail of the truck while reaching up and walking along side of the truck. When the bike is in the bed, gently lean it on the bed rail, and climb into the bed to strap it down. You dont need two ramps, dont need a step stool, just reach up and push

wwdiii wrote:

Never thought of that.  Guess if a guy was tall enough he could do it.  

I am not really tall, not short either. I am 6' and dont have an issue doing it. I would imagine a much shorter person could also do it easily in a normal sized half ton truck

12/15/2025 7:43am
Forty wrote:
Yep, I use my Yeti cooler, set it aside the ramp and use it to step up.  Or ride it up, after a few practice runs...

Yep, I use my Yeti cooler, set it aside the ramp and use it to step up.  

Or ride it up, after a few practice runs you'd have it dialed.

Been using a cooler as a step for as long as I can remember. Has to come along to the track anyway. 

I also put some strips of grip tape on the lid for when it’s wet outside. 

motoxtortuga
Posts
29
Joined
11/12/2021
Location
westside, CA, USA
12/15/2025 8:10am
black widow

One of my buddies uses this. He says if someone stole it he'd quit riding.

2
RDnutz
Posts
1173
Joined
2/13/2021
Location
Dolores, CO, USA
12/15/2025 8:10am
EAmato88 wrote:
Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the...

Man Ive never seen a group of men complicate something so simple in my life. I too have a Ram 2500 on 35" tires. Set the ramp up on the left side of the tailgate, push the bike up close to the bed rail of the truck while reaching up and walking along side of the truck. When the bike is in the bed, gently lean it on the bed rail, and climb into the bed to strap it down. You dont need two ramps, dont need a step stool, just reach up and push

how does that work for unloading? Back in the 1970s we used to just prop a 2x6 on the tailgate of the 1964 Chevy C10 and sit on the bike and roll out backwards- after smoking our brains out on the way to races. You either got style points for making it or laughs for crashing. All good.

RDnutz
Posts
1173
Joined
2/13/2021
Location
Dolores, CO, USA
12/15/2025 8:16am
One of my buddies uses this. He says if someone stole it he'd quit riding.
black widow

One of my buddies uses this. He says if someone stole it he'd quit riding.

I had a step ramp and it didn't work out. Watched their videos with the girl walking a bike up like it was nothing. Turns out the thing is really narrow, and my bike was pushing against me almost falling off. I have balance problems from decades ago which didn't help but still, seems unsafe for this 67 y/o guy.

1

Post a reply to: Loading bikes in tall trucks.

The Latest