Holeshot device recommendations?

wydopen
Profile picture for user wydopen
Posts
1306
Joined
8/17/2011
Location
805, CA, USA
wydopen
Looking to get a holeshot device for my new bike and looking for some recommendations. I’ve read people complaining about them on here/saying you don’t need one (and yes I understand your point that if everyone has one it cancels out the advantage) but I have a 29” inseam and can barley touch the ground so they make sense for me.

On my old bike I was running a tamer double button which I liked the idea of since you can use the higher position for concrete starts..I would get another one but they are tough to set..usually I’ll ask a random dude on the line and they usually struggle getting it to stick and if they don’t get it right it will release as soon as I get the revs up..I can only get it in the higher position by myself and it’s usually a struggle..That’s the only one I’ve had though so not sure if they are all like that. Don’t do allot of concrete starts so would probably take easy of use over the double position. Need one for my sons bike also and he does quite a few concrete gates so might go with the tamer for him. I’m always on the line with him to set it anyways..

Was looking at a works connection but am open to other ones also. Not a big pro taper guy so not really interested in their self setting one. Looks fragile also.

1
|
yz133rider
Profile picture for user yz133rider
Posts
5027
Joined
8/1/2013
Location
Avondale, PA, USA
yz133rider 12/26/2021 5:44am
12/26/2021 5:44am
Works connection is pretty bullet proof from what I’ve seen.
3
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7517
Joined
11/30/2013
Location
Portland/Los Angeles, CA, USA
CarlinoJoeVideo 12/26/2021 5:53am
12/26/2021 5:53am Edited Date/Time 12/26/2021 5:53am
I’ve been using the pro taper SELA, the one that you can set yourself and it’s been working perfect.
4
Motofinne
Profile picture for user Motofinne
Posts
11569
Joined
1/4/2014
Location
FI
Motofinne 12/26/2021 6:21am
12/26/2021 6:21am Edited Date/Time 12/26/2021 6:21am
Pro Taper SELA. Yes it's expensive. But the amount of starts you can practice by yourself with it is just unbeatable.

Just keep it clean and lubricated and it will work flawlessly.
1
AJ565
Profile picture for user AJ565
Posts
2352
Joined
3/12/2012
Location
San Antonio, TX, USA
AJ565 12/26/2021 6:49am
12/26/2021 6:49am
Another thing to consider is if it’s back ordered. Tamer was the only shop that had one in stock when I went to get one for my bike.
1

The Shop

See All »
murph783
Profile picture for user murph783
Posts
1355
Joined
3/2/2011
Location
USA
murph783 12/26/2021 6:52am
12/26/2021 6:52am
I use the pro taper SELA cause I go to the track by myself 95% of the time and I don’t wanna leave it up to chance that there won’t be someone to help me. I’d heard some questions on the design too, but idk I’ve had zero issues so far.
1
rf928
Profile picture for user rf928
Posts
72
Joined
1/17/2020
Location
CA
rf928 12/26/2021 7:21am
12/26/2021 7:21am
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to the gate from staging, otherwise you look like an idiot riding back and forth behind the gate with your leg out. Poof, mental advantage gone
1
tek14
Profile picture for user tek14
Posts
4960
Joined
1/26/2014
Location
Vantaa, FI
tek14 12/26/2021 7:27am
12/26/2021 7:27am
KTM powerparts 2-position.
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 12/26/2021 7:45am
12/26/2021 7:45am
Haven't used a sela, but ive used quite a few others and now have the whole tamer set up. Nothing has come even close. Keep asking someone to help ya on the line.. this is moto, moto is like fam...
1
hubbardmx50
Profile picture for user hubbardmx50
Posts
2835
Joined
11/17/2016
Location
Rancho Cucamonga, CA, USA
hubbardmx50 12/26/2021 8:39am
12/26/2021 8:39am
Works connection. Can’t beat American made.
2
1
Moto520
Profile picture for user Moto520
Posts
3665
Joined
2/4/2013
Location
Schaumburg, IL, USA
Moto520 12/26/2021 8:42am
12/26/2021 8:42am
Works connection. Nice and sleek. Works very well. Installation is easy enough.
2
Scotty Wennerstrom 12/26/2021 9:53am
12/26/2021 9:53am
The Tamer systems last the longest for sure. I typically don’t use the top button but have worn out the bottom button, took it off the fork guard and flipped it and had a brand new button. Also once you wear out the spot on the ring where the pin catches you can just move it a little and you have a brand new catch spot.
1
Hi Side
Profile picture for user Hi Side
Posts
708
Joined
9/19/2013
Location
USA
Hi Side 12/26/2021 10:12am
12/26/2021 10:12am
We use the OEM Husqvarna push button. My wife claims it’s easier for her to lock in than the Works Connection. I believe her because she never misses with Husky unit. It was always 2-3 attempts with the WC unit. I don’t understand it either but that’s what she claims.
Slaughter612s 12/26/2021 11:16am
12/26/2021 11:16am
Another one for the works Connection device. American made. Been around for years, tried and true.
Cheers
1
bh
Profile picture for user bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC, USA
bh 12/26/2021 11:49am
12/26/2021 11:49am
The works connection one is great, it’s super easy for me to set by myself with my boot. And I’ve never had a problem out of one.
1
Leeham
Profile picture for user Leeham
Posts
1159
Joined
10/29/2018
Location
Rochester, WA, USA
Leeham 12/26/2021 2:01pm
12/26/2021 2:01pm
rf928 wrote:
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to...
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to the gate from staging, otherwise you look like an idiot riding back and forth behind the gate with your leg out. Poof, mental advantage gone
But if you do get it locked in... you already won the mental game. Its do or die
bh
Profile picture for user bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC, USA
bh 12/26/2021 3:36pm
12/26/2021 3:36pm
rf928 wrote:
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to...
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to the gate from staging, otherwise you look like an idiot riding back and forth behind the gate with your leg out. Poof, mental advantage gone
Leeham wrote:
But if you do get it locked in... you already won the mental game. Its do or die
Its crazy how easy it is and how some guys minds are blown on the gate.
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 12/26/2021 3:44pm
12/26/2021 3:44pm
rf928 wrote:
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to...
I set my works connection by myself multiple times. I got really good at it because you only have one shot as you roll up to the gate from staging, otherwise you look like an idiot riding back and forth behind the gate with your leg out. Poof, mental advantage gone
Leeham wrote:
But if you do get it locked in... you already won the mental game. Its do or die
bh wrote:
Its crazy how easy it is and how some guys minds are blown on the gate.
Are we talking about the roczen way where you grab a handful of front brake n get it with you heal? I don't see how that's possible with the WC set up since you have to lift the lever. I can do it with my Tamer set up but only to the first latch. My wife sets both sides of my Tamer with minimal effort in most cases tho.
1
Sandusky26
Profile picture for user Sandusky26
Posts
3518
Joined
7/28/2021
Location
Eastern, NC, USA
Sandusky26 12/26/2021 3:49pm
12/26/2021 3:49pm
I have a works connection, I can lock it by myself. Hold rear brake, grab front wheel and roll it towards you and lock it.
1
1

Pit Row

See All »
Markee
Profile picture for user Markee
Posts
3669
Joined
4/15/2013
Location
Suffolk, VA, USA
Markee 12/26/2021 4:51pm
12/26/2021 4:51pm
Take it off and start like a man.
7
2
SFellure33
Profile picture for user SFellure33
Posts
150
Joined
12/21/2019
Location
PA, PA, USA
SFellure33 1/4/2022 5:28am
1/4/2022 5:28am
Pro taper SELA. Ive been using it for about a year and a half and no issues at all. Great product, easy to use, and durable.
peltier626 1/4/2022 6:55am
1/4/2022 6:55am
Markee wrote:
Take it off and start like a man.
Payow!
1

Post a reply to: Holeshot device recommendations?