GasGas 450 Factory Edition

dedi684
Profile picture for user dedi684
Posts
1389
Joined
8/21/2009
Location
Ravena, NY, USA
dedi684 1/21/2021 6:33pm
1/21/2021 6:33pm
skeef wrote:
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go...
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go in the same holes?Huh I can't find a part number on the GasGas tank to check myself. I have the larger OEM desert tank, from pictures the tanks looks the same.
MxKing809 wrote:
I say this with all due respect - that guy is retarded
Digger29 wrote:
The KTM and GasGas tanks are definitely different. The GasGas shrouds mount in different spots than the KTM and the GasGas doesn't have the 2 mount...
The KTM and GasGas tanks are definitely different. The GasGas shrouds mount in different spots than the KTM and the GasGas doesn't have the 2 mount holes up on the top of shroud by the gas cap like the KTM does.
Digger i think i need the 250f version. Any color will do. Lol im gonna have to make a detour off 495 in nh soon
1
Motoman79
Profile picture for user Motoman79
Posts
471
Joined
1/10/2014
Location
Phoenix, AZ, USA
Motoman79 1/21/2021 8:09pm
1/21/2021 8:09pm
Instead of changing tanks does anyone make red plastics for a 2021 Husky?
Brent
Profile picture for user Brent
Posts
5891
Joined
8/16/2006
Location
Temecula, CA, USA
Brent 1/21/2021 8:19pm
1/21/2021 8:19pm Edited Date/Time 1/21/2021 8:21pm
Cole Seely is doing a KTM to GasGas conversion on you tube, I believe he had to change the fuel tank...
3
3
racerhansen
Profile picture for user racerhansen
Posts
797
Joined
12/6/2010
Location
Aarhus, DK
racerhansen 1/22/2021 3:39am
1/22/2021 3:39am Edited Date/Time 1/22/2021 3:41am
skeef wrote:
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go...
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go in the same holes?Huh I can't find a part number on the GasGas tank to check myself. I have the larger OEM desert tank, from pictures the tanks looks the same.
Is he blind?
BTW. GASGAS tank part# is A54007013100



10

The Shop

See All »
skeef
Profile picture for user skeef
Posts
1455
Joined
7/18/2018
Location
USA
Fantasy
927th
skeef 1/22/2021 8:27am
1/22/2021 8:27am
skeef wrote:
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go...
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go in the same holes?Huh I can't find a part number on the GasGas tank to check myself. I have the larger OEM desert tank, from pictures the tanks looks the same.
racerhansen wrote:
Is he blind? BTW. GASGAS tank part# is A54007013100 [img]https://p.vitalmx.com/photos/forums/2021/01/22/474195/s1200_PHO_BIKE_DET_MC450F_handlebar_SALL_AEPI_V1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/22/474194/s1200_PHO_BIKE_DET_450SX_F_MY21_Decals_SALL_AEPI_V1.jpg[/img]
Is he blind?
BTW. GASGAS tank part# is A54007013100



I think that has been covered, I don't have the SXF I have the XCF.


They look different, thanks everybodyGrinning
Motoman79
Profile picture for user Motoman79
Posts
471
Joined
1/10/2014
Location
Phoenix, AZ, USA
Motoman79 1/22/2021 8:32am
1/22/2021 8:32am
Thanks the pics help. Still hoping to find replacement red plastic for the Husky
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA, USA
Digger29 1/22/2021 9:48am
1/22/2021 9:48am
MxKing809 wrote:
I say this with all due respect - that guy is retarded
Digger29 wrote:
The KTM and GasGas tanks are definitely different. The GasGas shrouds mount in different spots than the KTM and the GasGas doesn't have the 2 mount...
The KTM and GasGas tanks are definitely different. The GasGas shrouds mount in different spots than the KTM and the GasGas doesn't have the 2 mount holes up on the top of shroud by the gas cap like the KTM does.
dedi684 wrote:
Digger i think i need the 250f version. Any color will do. Lol im gonna have to make a detour off 495 in nh soon
It will be my pleasure and let's definitely do it.
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA, USA
Digger29 1/22/2021 5:14pm
1/22/2021 5:14pm
michriddle109 wrote:
Just started my build [img]https://p.vitalmx.com/photos/forums/2021/01/20/473968/s1200_IMG_20210120_154655144.jpg[/img]
Just started my build
I'm not in love with the color of Guts seat cover. The seat that you have seems to match the plastic perfectly. Where did you get it?
3
michriddle109
Profile picture for user michriddle109
Posts
43
Joined
12/24/2017
Location
Blountsville, AL, USA
michriddle109 1/23/2021 2:27pm
1/23/2021 2:27pm
Hey digger this is the throttle syndicate cover. They also have the one with blue top cover. Pretty sure they do the factory graphics. I've got the backgrounds and trim kit headed my way. Not sure yet on shroud graphics.
3
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA, USA
Digger29 1/23/2021 4:26pm
1/23/2021 4:26pm
michriddle109 wrote:
Hey digger this is the throttle syndicate cover. They also have the one with blue top cover. Pretty sure they do the factory graphics. I've got...
Hey digger this is the throttle syndicate cover. They also have the one with blue top cover. Pretty sure they do the factory graphics. I've got the backgrounds and trim kit headed my way. Not sure yet on shroud graphics.
Thanks, I sold both covers that I ordered from Guts and just ordered the same one that you have. I even put your number on it :-)
michriddle109
Profile picture for user michriddle109
Posts
43
Joined
12/24/2017
Location
Blountsville, AL, USA
michriddle109 1/23/2021 4:52pm
1/23/2021 4:52pm
Digger29 wrote:
Thanks, I sold both covers that I ordered from Guts and just ordered the same one that you have. I even put your number on it...
Thanks, I sold both covers that I ordered from Guts and just ordered the same one that you have. I even put your number on it :-)
Wife picked the number for me. Can't go wrong. Really liking this bike so far coming off of a 2016 450 sxf. Hope to put a few more hours on it tomorrow
Motoman79
Profile picture for user Motoman79
Posts
471
Joined
1/10/2014
Location
Phoenix, AZ, USA
Motoman79 1/24/2021 5:17am
1/24/2021 5:17am Edited Date/Time 1/24/2021 5:17am
michriddle109 wrote:
Hey digger this is the throttle syndicate cover. They also have the one with blue top cover. Pretty sure they do the factory graphics. I've got...
Hey digger this is the throttle syndicate cover. They also have the one with blue top cover. Pretty sure they do the factory graphics. I've got the backgrounds and trim kit headed my way. Not sure yet on shroud graphics.
Thanks going to order seat from them. Checked decal works and couple other plastic manufactures no red plastic going to have to buy a gasgas tank it looks like.
Motoman79
Profile picture for user Motoman79
Posts
471
Joined
1/10/2014
Location
Phoenix, AZ, USA
Motoman79 1/25/2021 3:44pm
1/25/2021 3:44pm


Here is what Sean at DeCal works is working on for me a little retro to get my red fix


Sean Murdock
815-784-4000 x 254
DeCal Works
22
wm741
Profile picture for user wm741
Posts
297
Joined
12/10/2010
Location
Magnolia, TX, USA
Fantasy
732nd
wm741 1/28/2021 3:57pm
1/28/2021 3:57pm


22
MN_MX595
Profile picture for user MN_MX595
Posts
33
Joined
2/3/2021
Location
Cottage Grove, MN, USA
MN_MX595 2/3/2021 10:10am
2/3/2021 10:10am
Well got inspired by this thread...finally ordered some parts for my new MC450F. First new bike I've ever had, pretty damn cool lol.

Bars, grips, hour meter on the way now.

Love that actual replica kit digger29 has - couldn't find the vendor on ebay, anyone else have any luck?

Having a hard time finding graphics kits that I like so far....not many people have kits out
motopro graphics
bikegraphix
throttle syndicate
adept graphics co

among others as well
5
dirtywardog 2/3/2021 11:07am
2/3/2021 11:07am
no hour meter on the gas gas stock?
kiwifan
Profile picture for user kiwifan
Posts
9850
Joined
10/31/2009
Location
USA
kiwifan 2/3/2021 11:39am
2/3/2021 11:39am
Wouldnt a factory edition Gas Gas be like er a KTM? i.e. all the goodies added back on
2

Pit Row

See All »
MN_MX595
Profile picture for user MN_MX595
Posts
33
Joined
2/3/2021
Location
Cottage Grove, MN, USA
MN_MX595 2/3/2021 11:53am
2/3/2021 11:53am
dirtywardog wrote:
no hour meter on the gas gas stock?
Not on mine no, just electric start button and the kill switch. I am guessing if I hooked up to the bike I could view the run hours, run hours under x load, etc.

At the very least, runtime hours. I ordered an hour meter for it though.
Motoman79
Profile picture for user Motoman79
Posts
471
Joined
1/10/2014
Location
Phoenix, AZ, USA
Motoman79 2/4/2021 5:19am
2/4/2021 5:19am
dirtywardog wrote:
no hour meter on the gas gas stock?
By reading all the reports the GasGas was about lowering cost by abut 900 bucks. No hour meter, map switch, forged triple clamps different tires...but dam it is sexy!!
2
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA, USA
Digger29 2/4/2021 7:56am
2/4/2021 7:56am
MN_MX595 wrote:
Well got inspired by this thread...finally ordered some parts for my new MC450F. First new bike I've ever had, pretty damn cool lol. Bars, grips, hour...
Well got inspired by this thread...finally ordered some parts for my new MC450F. First new bike I've ever had, pretty damn cool lol.

Bars, grips, hour meter on the way now.

Love that actual replica kit digger29 has - couldn't find the vendor on ebay, anyone else have any luck?

Having a hard time finding graphics kits that I like so far....not many people have kits out
motopro graphics
bikegraphix
throttle syndicate
adept graphics co

among others as well
I can help you. Text me at 508 243 1232
prida28
Profile picture for user prida28
Posts
91
Joined
2/22/2016
Location
Escondido, CA, USA
prida28 2/4/2021 8:16am
2/4/2021 8:16am
Turning EX into MC. Still need to get tank and full set of red plastic. Took my wheels, triple clamps and suspension off my FC450





3
hunterp27
Profile picture for user hunterp27
Posts
28
Joined
3/27/2017
Location
Mc Kinney, TX, USA
hunterp27 2/4/2021 8:28am
2/4/2021 8:28am
Did you repaint your frame red or is it orange? cannot tell from the picture
prida28
Profile picture for user prida28
Posts
91
Joined
2/22/2016
Location
Escondido, CA, USA
prida28 2/4/2021 8:31am
2/4/2021 8:31am
hunterp27 wrote:
Did you repaint your frame red or is it orange? cannot tell from the picture
The frame is red. This is a 21 GASGAS EX 450. The color of the graphics is off a touch. Waiting on full set of red plastic to color match red graphics.
prida28
Profile picture for user prida28
Posts
91
Joined
2/22/2016
Location
Escondido, CA, USA
prida28 2/4/2021 8:40am
2/4/2021 8:40am
skeef wrote:
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go...
I called 3bros in newport and the guy said he believed the GasGas tank and KTM are the same but shouldn't matter because the plastics go in the same holes?Huh I can't find a part number on the GasGas tank to check myself. I have the larger OEM desert tank, from pictures the tanks looks the same.
racerhansen wrote:
Is he blind? BTW. GASGAS tank part# is A54007013100 [img]https://p.vitalmx.com/photos/forums/2021/01/22/474195/s1200_PHO_BIKE_DET_MC450F_handlebar_SALL_AEPI_V1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/22/474194/s1200_PHO_BIKE_DET_450SX_F_MY21_Decals_SALL_AEPI_V1.jpg[/img]
Is he blind?
BTW. GASGAS tank part# is A54007013100



Anybody find a place to buy the MC GASGAS tank in the US?
prida28
Profile picture for user prida28
Posts
91
Joined
2/22/2016
Location
Escondido, CA, USA
prida28 2/4/2021 8:48am
2/4/2021 8:48am
Digger29 wrote:
Yes, I'm in the process of doing that right now. [img]https://p.vitalmx.com/photos/forums/2021/01/20/473960/s1200_PXL_20201121_155431183_2.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/20/473961/s1200_PXL_20201213_163709423_2.jpg[/img]
Yes, I'm in the process of doing that right now.

LungButter wrote:
Daaaaammmnnnnn! That's sexy....

Just think how sexy it would be with all those blue accents and the blue clamps though Tongue
Digger29 wrote:
Thanks brother :-) It's definitely a work in progress. The skid plate final came in. I have white hoses from Moto Hose for it. I'm building...
Thanks brother :-) It's definitely a work in progress. The skid plate final came in. I have white hoses from Moto Hose for it. I'm building a custom pr of cone valves right now for it. I weighed a few wks ago at our pet supply store on our expensive pet scale and with all the Ti bolts, pipe, pegs and Guts phantom seat foam it weighed 216.6. I know will probably weigh 220ish with the skid plate and spring cone valves but I was super serious about what it weighed the way you see it the pics, it's pretty damn light. I forgot I swapped the stock clutch and cover to a Rekluse torque drive and damn the stock clutch felt like it was made of steel and it weighed a ton in comparison to the Rekluse cover.
Man that bike looks awesome!

I have an FMF Exhaust, P3 skid plate and set of black wheels with Red hubs on back order as well. So hard to find parts sometime. I am also doing a set of Specbolt Nickel Wurks (just for the look).

Where are you getting your CV’s from? I thinking about selling my KYB and trying a set.

Also, please post picture of white hoses. I am really curious to see how they look.

Thanks for sharing!
MDana87
Profile picture for user MDana87
Posts
112
Joined
8/5/2012
Location
USA
MDana87 2/4/2021 12:18pm
2/4/2021 12:18pm
prida28 wrote:
Anybody find a place to buy the MC GASGAS tank in the US?
It doesn't seem like there's much of any of the GG specific parts available yet. Most are Mid-March ETA's, last I was told.
1
MN_MX595
Profile picture for user MN_MX595
Posts
33
Joined
2/3/2021
Location
Cottage Grove, MN, USA
MN_MX595 2/4/2021 12:44pm
2/4/2021 12:44pm
Only place I could order parts so far was Rocky Mountain ATV MC, Motosport didn't have anything up yet for Gas Gas

Went with the red bar pad for my pro tapers, looked good on that bike posted earlier in the thread.

Stock bars on these gas gas bike is one of the weirder bends I've ever had - definitely don't like them.

I'm a Henry/Reed bend
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA, USA
Digger29 2/4/2021 3:51pm
2/4/2021 3:51pm
LungButter wrote:
Daaaaammmnnnnn! That's sexy....

Just think how sexy it would be with all those blue accents and the blue clamps though Tongue
Digger29 wrote:
Thanks brother :-) It's definitely a work in progress. The skid plate final came in. I have white hoses from Moto Hose for it. I'm building...
Thanks brother :-) It's definitely a work in progress. The skid plate final came in. I have white hoses from Moto Hose for it. I'm building a custom pr of cone valves right now for it. I weighed a few wks ago at our pet supply store on our expensive pet scale and with all the Ti bolts, pipe, pegs and Guts phantom seat foam it weighed 216.6. I know will probably weigh 220ish with the skid plate and spring cone valves but I was super serious about what it weighed the way you see it the pics, it's pretty damn light. I forgot I swapped the stock clutch and cover to a Rekluse torque drive and damn the stock clutch felt like it was made of steel and it weighed a ton in comparison to the Rekluse cover.
prida28 wrote:
Man that bike looks awesome! I have an FMF Exhaust, P3 skid plate and set of black wheels with Red hubs on back order as well...
Man that bike looks awesome!

I have an FMF Exhaust, P3 skid plate and set of black wheels with Red hubs on back order as well. So hard to find parts sometime. I am also doing a set of Specbolt Nickel Wurks (just for the look).

Where are you getting your CV’s from? I thinking about selling my KYB and trying a set.

Also, please post picture of white hoses. I am really curious to see how they look.

Thanks for sharing!
This is far as I've gotten with the white hoses, skid plate and holeshot device. I heard my CVs are done so that might give me some much needed motivation to finish the bike. I did put these white radiator louvers on the other day though 😁😁

7
Agent717
Profile picture for user Agent717
Posts
587
Joined
9/6/2009
Location
Cedar Park, TX, USA
Agent717 2/4/2021 8:15pm
2/4/2021 8:15pm Edited Date/Time 2/4/2021 8:15pm
What do you guys think 2022 holds for the Gas Gas? I think we're all expecting a new KTM/Husky for 2022. Will they carry on with the current Gas Gas as a legacy model or move to the next gen with the others after only 1 year?

Bike looks freakin rad BTW.

Post a reply to: GasGas 450 Factory Edition