Let's see/review those 2019 kx450s

FortyHat
Profile picture for user FortyHat
Posts
345
Joined
5/16/2017
Location
USA
FortyHat 7/10/2019 6:19pm
7/10/2019 6:19pm
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather in there, and I've been riding without the stock one for a while now. I'm especially worried about this bike because of the hydro clutch cylinder being right there.
dmm698
Profile picture for user dmm698
Posts
955
Joined
6/24/2015
Location
USA
dmm698 7/10/2019 6:25pm
7/10/2019 6:25pm
FortyHat wrote:
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather...
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather in there, and I've been riding without the stock one for a while now. I'm especially worried about this bike because of the hydro clutch cylinder being right there.
I started to lob the plastic off of mine to a more acceptable amount so shit doesn’t get stuck behind it but I got side tracked and never finished. Now I think about it every time I wash my bike and have to pry muck out of that, and see my started cut. I’ll finish it at some point
GW83
Profile picture for user GW83
Posts
45
Joined
12/30/2018
Location
Mokena, IL, USA
GW83 7/10/2019 6:59pm
7/10/2019 6:59pm
FortyHat wrote:
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather...
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather in there, and I've been riding without the stock one for a while now. I'm especially worried about this bike because of the hydro clutch cylinder being right there.
Haven’t found a case saver yet... I removed the plastic guard and reinstalled the metal protection plate using new (shorter) bolts from the hardware store. It’s probably not going to protect the slave cylinder much but will hopefully protect the case a little... Hopefully it’s better then nothing.
dancolvin633
Profile picture for user dancolvin633
Posts
685
Joined
6/28/2016
Location
Plumas Lake, CA, USA
dancolvin633 7/10/2019 8:26pm
7/10/2019 8:26pm
dancolvin633 wrote:
Question is, should I let Stank Dog ride my bike?? 😂😂
FortyHat wrote:
Obvious answer is yes, maybe stank is contagious? I'd take some
JohnnyD13 wrote:
Is it your bike he is going to borrow? I’m a vet rider so my bike doesn’t ever get abused. I don’t rev it before landing...
Is it your bike he is going to borrow? I’m a vet rider so my bike doesn’t ever get abused. I don’t rev it before landing. It would be hard to let a pro race it.
No his buddy Kenny usually loans him his bike

The Shop

See All »
FortyHat
Profile picture for user FortyHat
Posts
345
Joined
5/16/2017
Location
USA
FortyHat 7/11/2019 10:29am
7/11/2019 10:29am
FortyHat wrote:
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather...
Anyone have any luck finding a case saver? I have always taken off the front sprocket guard on every bike I've owned so muck doesn't gather in there, and I've been riding without the stock one for a while now. I'm especially worried about this bike because of the hydro clutch cylinder being right there.
GW83 wrote:
Haven’t found a case saver yet... I removed the plastic guard and reinstalled the metal protection plate using new (shorter) bolts from the hardware store. It’s...
Haven’t found a case saver yet... I removed the plastic guard and reinstalled the metal protection plate using new (shorter) bolts from the hardware store. It’s probably not going to protect the slave cylinder much but will hopefully protect the case a little... Hopefully it’s better then nothing.
I did the same exact thing. Fingers crossed...
mxrose3
Profile picture for user mxrose3
Posts
2351
Joined
8/17/2006
Location
Delmar, DE, USA
mxrose3 7/11/2019 10:41am
7/11/2019 10:41am
tackomoto wrote:
Is anyone running one of these in offroad/gncc type racing? How easy do they over heat? Anyone able to give me some pros and cons to...
Is anyone running one of these in offroad/gncc type racing? How easy do they over heat? Anyone able to give me some pros and cons to them in this racing environment?

I’m currently riding a KTM 250XC two stroke. I was thinking of going to a new 350, but I’d really like to get away from another KTM. Everyone says these new KX450s have a free feeling engine, kind of two stroke-ish. My local dealer has a leftover ‘19, really considering it. My only worry is that it will be way too much motor for me! (Vet 30 B guy).
I can't comment on how it would do in offroad/gncc type racing, but I don't think the 450 will be too much motor for you. It has really good throttle response down low, but in the middle it is mellow and just steadily pulls harder up top. Have you ever ridden a newer 450 before? I'm not sure how the 250XC motor is, but my 450 is way more rideable than my YZ250 two stroke. I can ride the 450 longer because it doesn't wear me out as fast as the two stroke that has a hard hitting powerband.
1
tackomoto
Profile picture for user tackomoto
Posts
38
Joined
1/16/2019
Location
Charleston, WV, USA
tackomoto 7/11/2019 11:35am
7/11/2019 11:35am
mxrose3 wrote:
I can't comment on how it would do in offroad/gncc type racing, but I don't think the 450 will be too much motor for you. It...
I can't comment on how it would do in offroad/gncc type racing, but I don't think the 450 will be too much motor for you. It has really good throttle response down low, but in the middle it is mellow and just steadily pulls harder up top. Have you ever ridden a newer 450 before? I'm not sure how the 250XC motor is, but my 450 is way more rideable than my YZ250 two stroke. I can ride the 450 longer because it doesn't wear me out as fast as the two stroke that has a hard hitting powerband.
I have ridden a 2018 yz450, just not it the hills. My two stroke hits hard and abrupt, which is what wears me out so much faster. I’m getting older, fatter, and slower, so I’ve got to change to a four stroke!
mxrose3
Profile picture for user mxrose3
Posts
2351
Joined
8/17/2006
Location
Delmar, DE, USA
mxrose3 7/11/2019 1:43pm
7/11/2019 1:43pm
tackomoto wrote:
I have ridden a 2018 yz450, just not it the hills. My two stroke hits hard and abrupt, which is what wears me out so much...
I have ridden a 2018 yz450, just not it the hills. My two stroke hits hard and abrupt, which is what wears me out so much faster. I’m getting older, fatter, and slower, so I’ve got to change to a four stroke!
Well, you don't HAVE to..... but it will make it easier on you Grinning The only negative with a four stroke is that it is a heavier bike than a 2 stroke. But the KX and KTM are the lightest of them. I've ridden a new KTM450 and a new KX450, and I swear the KX feels lighter.
3
JohnnyD13
Profile picture for user JohnnyD13
Posts
751
Joined
3/23/2014
Location
Loganville, GA, USA
JohnnyD13 7/11/2019 7:06pm
7/11/2019 7:06pm
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe how long this thread is. Kawasaki needs to take note of how many people have spread the word on this bike resulting in a purchase!
11
SLAPAHO
Profile picture for user SLAPAHO
Posts
1922
Joined
8/15/2006
Location
Newport Beach, CA, USA
Fantasy
390th
SLAPAHO 7/11/2019 8:28pm
7/11/2019 8:28pm
awesome! ^^
i've been eyeing some of the 90s retro graphics, i'm going to do the 1990 kx style. yours came out nice!
Moto520
Profile picture for user Moto520
Posts
3636
Joined
2/4/2013
Location
Schaumburg, IL, USA
Moto520 7/11/2019 8:36pm
7/11/2019 8:36pm
The retro kx looks amazing.
50dippin
Profile picture for user 50dippin
Posts
361
Joined
10/4/2009
Location
Los Angeles, CA, USA
50dippin 7/12/2019 11:48am
7/12/2019 11:48am
JohnnyD13 wrote:
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe...
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe how long this thread is. Kawasaki needs to take note of how many people have spread the word on this bike resulting in a purchase!
And if anyone at kawi is watching I will take credit for starting the thread and wouldn't have a problem if I got paid with a 2020. Cool
9
datkin128
Profile picture for user datkin128
Posts
279
Joined
12/23/2015
Location
Lakewood, CO, USA
datkin128 7/12/2019 12:06pm
7/12/2019 12:06pm
JohnnyD13 wrote:
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe...
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe how long this thread is. Kawasaki needs to take note of how many people have spread the word on this bike resulting in a purchase!
50dippin wrote:
And if anyone at kawi is watching I will take credit for starting the thread and wouldn't have a problem if I got paid with a...
And if anyone at kawi is watching I will take credit for starting the thread and wouldn't have a problem if I got paid with a 2020. Cool
Hahaha
lawson34
Profile picture for user lawson34
Posts
719
Joined
1/19/2019
Location
London, KY, USA
lawson34 7/12/2019 12:46pm
7/12/2019 12:46pm
JohnnyD13 wrote:
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe...
My good friend finally broke down after spending thousands on his 2019 CRF450r to get it to handle and got a 19 kx450. I can’t believe how long this thread is. Kawasaki needs to take note of how many people have spread the word on this bike resulting in a purchase!
50dippin wrote:
And if anyone at kawi is watching I will take credit for starting the thread and wouldn't have a problem if I got paid with a...
And if anyone at kawi is watching I will take credit for starting the thread and wouldn't have a problem if I got paid with a 2020. Cool
Lmao it's really a very informative thread, got some damn fine people here that are very helpful thx all
2
navalseabee
Profile picture for user navalseabee
Posts
1086
Joined
5/5/2011
Location
Virginia Beach, VA, USA
navalseabee 7/12/2019 12:54pm
7/12/2019 12:54pm
That retro look is sick
Moto520
Profile picture for user Moto520
Posts
3636
Joined
2/4/2013
Location
Schaumburg, IL, USA
Moto520 7/12/2019 2:09pm
7/12/2019 2:09pm
lawson34 wrote:
Lmao it's really a very informative thread, got some damn fine people here that are very helpful thx all
Heroes? Too strong of a word?
1

Pit Row

See All »
lawson34
Profile picture for user lawson34
Posts
719
Joined
1/19/2019
Location
London, KY, USA
lawson34 7/13/2019 1:00pm
7/13/2019 1:00pm
Nah everyone needs a hero
lawson34
Profile picture for user lawson34
Posts
719
Joined
1/19/2019
Location
London, KY, USA
lawson34 7/13/2019 3:51pm
7/13/2019 3:51pm
bRaDzAs$ wrote:
[img]https://p.vitalmx.com/photos/forums/2019/07/11/359696/s1200_IMG_5835_14223.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2019/07/11/359695/s1200_IMG_5837_14225.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2019/07/11/359697/s1200_IMG_5847_14227.jpg[/img]



Dude the retro colors look damn good
NeedMoto
Profile picture for user NeedMoto
Posts
783
Joined
8/6/2015
Location
Penn Valley, CA, USA
NeedMoto 7/13/2019 9:10pm
7/13/2019 9:10pm Edited Date/Time 7/13/2019 9:54pm
60 years old, and love riding moto my 19 Kawi!

Goodies... Vortex ignition, Rekluse Torque Drive Clutch, Full PC TI exhaust, Ride Engineering link, Pro Taper fusion bars with XTRIG PHDS Mounts, Raptor pegs, Roth suspension valving.

Couple of shots with the phone, while riding with fellow Kawi rider Dan Colvin, who put on a very fun ride day today!



14
JB479
Profile picture for user JB479
Posts
805
Joined
1/11/2012
Location
AU
JB479 7/14/2019 1:01am
7/14/2019 1:01am
Silly question but besides plastics/graphics. Did kawi change anything on the 450 for 2020? Like suspension settings etc? Its hard to find info.
Garrett314
Profile picture for user Garrett314
Posts
155
Joined
8/2/2015
Location
Beaumont, CA, USA
Garrett314 7/14/2019 6:56am
7/14/2019 6:56am
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have the service manual. Installed a PC Ti-6 yesterday and it’s the only torque value I’m missing. Any help would be appreciated
DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 7/14/2019 6:59am
7/14/2019 6:59am
Garrett314 wrote:
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have...
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have the service manual. Installed a PC Ti-6 yesterday and it’s the only torque value I’m missing. Any help would be appreciated
11 ft lbs
1
Garrett314
Profile picture for user Garrett314
Posts
155
Joined
8/2/2015
Location
Beaumont, CA, USA
Garrett314 7/14/2019 7:04am
7/14/2019 7:04am
Garrett314 wrote:
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have...
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have the service manual. Installed a PC Ti-6 yesterday and it’s the only torque value I’m missing. Any help would be appreciated
DB97 wrote:
11 ft lbs
Thank you!!
1
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD, USA
mxb2 7/14/2019 7:45am
7/14/2019 7:45am
NeedMoto wrote:
60 years old, and love riding moto my 19 Kawi! Goodies... Vortex ignition, Rekluse Torque Drive Clutch, Full PC TI exhaust, Ride Engineering link, Pro Taper...
60 years old, and love riding moto my 19 Kawi!

Goodies... Vortex ignition, Rekluse Torque Drive Clutch, Full PC TI exhaust, Ride Engineering link, Pro Taper fusion bars with XTRIG PHDS Mounts, Raptor pegs, Roth suspension valving.

Couple of shots with the phone, while riding with fellow Kawi rider Dan Colvin, who put on a very fun ride day today!



Nice, how you like the vortex, pc pipe? Compared to stock, bark more? Any gearing changes? Fuel? Thanks.
lawson34
Profile picture for user lawson34
Posts
719
Joined
1/19/2019
Location
London, KY, USA
lawson34 7/14/2019 8:06am
7/14/2019 8:06am Edited Date/Time 7/14/2019 8:08am
I ass dyno'd some t4 yesterday back to back with 93 I know people will say I'm nuts but the t4 added power and throttle response... I noticed it the most when rolling on the throttle in 3rd gear..
1
Jbulz
Profile picture for user Jbulz
Posts
871
Joined
3/29/2016
Location
Ithaca, NY, USA
Jbulz 7/14/2019 8:12am
7/14/2019 8:12am
lawson34 wrote:
I ass dyno'd some t4 yesterday back to back with 93 I know people will say I'm nuts but the t4 added power and throttle response...
I ass dyno'd some t4 yesterday back to back with 93 I know people will say I'm nuts but the t4 added power and throttle response... I noticed it the most when rolling on the throttle in 3rd gear..
T4 is oxygenated so it will add power. Enrich the fueling and you'll make even more power. Advertised Stoich is 13.54, so if you map about 8% richer should be best.
1
lawson34
Profile picture for user lawson34
Posts
719
Joined
1/19/2019
Location
London, KY, USA
lawson34 7/14/2019 8:18am
7/14/2019 8:18am
lawson34 wrote:
I ass dyno'd some t4 yesterday back to back with 93 I know people will say I'm nuts but the t4 added power and throttle response...
I ass dyno'd some t4 yesterday back to back with 93 I know people will say I'm nuts but the t4 added power and throttle response... I noticed it the most when rolling on the throttle in 3rd gear..
Jbulz wrote:
T4 is oxygenated so it will add power. Enrich the fueling and you'll make even more power. Advertised Stoich is 13.54, so if you map about...
T4 is oxygenated so it will add power. Enrich the fueling and you'll make even more power. Advertised Stoich is 13.54, so if you map about 8% richer should be best.
Exactly!!! But I think I'll leave it be, damn thing was a handful yesterday
2
MOTOXSTATION 7/14/2019 8:24am
7/14/2019 8:24am
Garrett314 wrote:
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have...
What is the toque spec on the two nuts on the exhaust flange? I looked through my book and it’s not listed and I don’t have the service manual. Installed a PC Ti-6 yesterday and it’s the only torque value I’m missing. Any help would be appreciated
Page 97....Muffler Clamp Bolt 12 ft-lb...stock

https://p.vitalmx.com/photos/forums/2019/07/05/358366/s1600_2019_Kawasa…

Post a reply to: Let's see/review those 2019 kx450s