rb757

Member Summary

Forum replies: 17

Lives in:

Grand Island, NY, USA

Member Since:

2/18/2023

Recent Activity

Filter:

All

CarlinoJoeVideo Liked a reply to forum topic New 2023 YZ450F

4/12/2025 3:03am

YZ 450 23-25 Engine Mount Torque Specs OEM 34nm -Top Mount to Frame 45nm -Top Mount to Engine 55nm -Front Mount Large nut/bolt 34nm -Front Mount Small nut/bolt OEM Reduced by 40% if lubed or loctite 13.6nm -Top Mount to Frame 18nm -Top Mount to Engine 22nm -Front Mount Large nut/bolt 13.6nm -Front Mount Small nut/bolt FCP Reccomened (With use of their mounts)(Same as OEM) 34nm -Top Mount to Frame 45nm -Top Mount to Engine 54nm -Front Mount Large nut/bolt 34nm -Front Mount Small nut/bolt

This forum topic has 2598 replies.

steelworker77 Liked a reply to forum topic New 2023 YZ450F

4/10/2025 6:45am

I may have to try that out. Since the flywheel and throttle tamer I am back to the 555 fuel settings on the overall best power map on the vortex. I love the mid and top pull and the tamer really mellowed out the bottom. I need to get to some technical tracks to see if it mellowed it to much. Hoping to have a set of the New Luxon rubber mounted engine mounts by sat so I can test them out sunday. After speaking with Billy at Luxon I am pretty pumped to try these out. I am also...

This forum topic has 2598 replies.

rb757 Added a reply to New 2023 YZ450F

3/28/2025 4:47am

The flywheel helps too, I don’t even use the clutch now bc of it lol. The throttle tube was just the cherry on top

rb757 Added a reply to New 2023 YZ450F

3/28/2025 1:25am

For me it was the last piece of the puzzle. Everything seems to work together well but I think this helped me the most. And the throttle pull is like butter

rb757 Added a reply to New 2023 YZ450F

3/27/2025 5:58pm

So after 2 rides with the flywheel weight and the addition of the g2 tamer throttle tube this bike is awesome.

swaldrop Liked a reply to forum topic New 2023 YZ450F

1/8/2025 11:44am

Yeah, but what does Keefer know over some rando 50 year old dude in Florida?

This forum topic has 2598 replies.

rb757 Added a reply to New 2023 YZ450F

1/8/2025 10:49am

rb757 Added a reply to New 2023 YZ450F

1/8/2025 9:59am

They had 2 options. I ordered a whole flywheel instead of sending mine to them and adding the weight on mine.

swaldrop Liked a reply to forum topic New 2023 YZ450F

1/8/2025 9:56am

May as well send it down to me in Florida so I can test it and provide some feedback on whether or not it's worth it. Not for selfish reasons at all. Purely for the benefit of the community alone 👍

This forum topic has 2598 replies.

rb757 Added a reply to New 2023 YZ450F

1/8/2025 9:53am

https://www.keeferinctesting.com/yamaha-yz450f-flywheel-weight/

rb757 Added a reply to New 2023 YZ450F

1/8/2025 7:20am

Ordered a flywheel weight yesterday, should be at my house by the end of the week. Will be a while before it gets used as it’s currently snowing.

LLOYD22 Liked a reply to forum topic New 2023 YZ450F

11/14/2024 4:33pm

Content cannot be rendered.

This forum topic has 2598 replies.

CarlinoJoeVideo Liked a reply to forum topic New 2023 YZ450F

11/13/2024 11:24am

To make the testing easier, I’d buy parts 18-22. Some of them you might need qty 2. Based on the calculations the valving on the 24 will work ok with the 25 link if you change spring rate. You should be able to tune it in with clickers. The 25 valving might just have a lighter slower tune because the spring is decreased. I’d start by speeding up the rebound with the lighter spring.

This forum topic has 2598 replies.

rb757 Added a reply to New 2023 YZ450F

11/13/2024 7:09am

Yeah there’s no way to save the bearings in my experience lol. I would love to try the new knuckle and I already have a lighter spring I’m just concerned about valving. I already have my shock done by Enzo and don’t really want to send it back if I don’t have to. This bike does squat a lot unload...

rb757 Added a reply to New 2023 YZ450F

11/13/2024 4:33am

Does the knuckle come with bearings installed already?

rb757 Added a reply to New 2023 YZ450F

10/7/2024 2:55pm

I have been running the rear at82 120/90 and I love it. I have a 3s on the front and can’t wait to switch it over to an at82 front

rb757 Added a reply to New 2023 YZ450F

8/26/2024 12:29pm

Yes this happened to a friend of mine on his 23. Rear banjo bolt came lose and lost some fuild and all the brakes lol yet to happen to my 23 but I should torque it down before it happens to me. His bike probably had 20-30 hours at the time.