Recent Activity
All
Kenny Boy Started a new thread 04 yz250, 09 yz250f swingarm swap
9/5/2022 6:24am I just bought a 2009 yz250f swingarm to put on my 2004 yz250, I read on another thread something about having to mod and/or the frame to get the newer style linkage to fit.I'm just seeing if anyone here knows anything about the swap to a steel frame. I got a 09 swingarm, complete linkage, and 25mm axle on the...
This forum thread has 18 replies.
flat4 Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
9/22/2020 3:13pm
Love this build! That carbon tail is icing on the cake!
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
9/22/2020 3:13pm
Content cannot be rendered.
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
9/22/2020 3:12pm
Very nice indeed! It's a long layer cake...
This forum topic has 687 replies.
David934 Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
9/22/2020 3:12pm
This is better then Factory build??? Yeah
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
8/19/2020 8:38pm
TI pin dowell 
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
8/19/2020 8:38pm
To all those who bought this (CWI crank) check yours and above all leave here your experience with mine seem good, 0.7mm freeplay(both side) before the screw 
This forum topic has 687 replies.
ZR702 Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
8/19/2020 8:38pm
Love this build man, next level work
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
8/19/2020 8:38pm
Content cannot be rendered.
This forum topic has 687 replies.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
7/22/2020 3:31pm
The disc screws are HRC titanium type, but have a 45 ° chamfer for seating on the disc. The wheel hub has 6 screws for the rear disc 
This forum topic has 687 replies.
cdoggy81 Liked a reply to forum topic YZ250 YZ125 Carbon Fiber seat base group buy
7/4/2020 3:13pm
FYI - stock steel brackets & screws weigh 92g so my guess is we are saving ~ 90g over the stock base. 
This forum topic has 151 replies.
cdoggy81 Liked a reply to forum topic YZ250 YZ125 Carbon Fiber seat base group buy
7/2/2020 2:28pm
Sorry to hear that Zesiger 😐 I hope he gets it to you soon. As for weight he said stock one is 530g WITH the metal brackets (which are heavier than you think) vs 340g for the carbon base with carbon brackets. Not sure how much of that is From the steel brackets so YMMV....
This forum topic has 151 replies.
Yz229 Liked a reply to forum topic Tom Morgan YZ315 Stroker (Red Bull Straight Rhythm)
7/1/2020 6:14pm
I won't know on DEP for sure unless I do back to back comparison to stock pipe. Going from 100% stock bike with worn top end, clogged stock silencer with 15/45 gearing...yes 15/45 previous owner had. Now it will have Tom Morgan 295cc ported, milled head, DEP Pipe, R304 silencer, Vforce Reeds, 11oz FWW, stock gearing (14/50). I'm sure it will be night and day difference. May do stock pipe comparison some day, but results may be moot since most aren't running Tom Morgan 295cc.
This forum topic has 289 replies.
Kenny Boy Added a reply to YZ250 YZ125 Carbon Fiber seat base group buy
7/1/2020 4:58pm Im in NC, my last ups order took a few extra days than normal. I bet you get it in the next few days. I would really love to hear the stock seat base weight vs this carbon unit.
Hulkteam Liked a reply to forum topic 500 Two Stroke project. "I hope to end up in 2023"
3/18/2020 9:47am
Content cannot be rendered.
This forum topic has 687 replies.
DynoDan22 Liked a reply to forum topic Engine pros please help
3/18/2020 9:41am
My opinion is to put a half cap full of 2 stroke oil in the spark plug hole, fill with trans oil and install the motor. By the time you install the motor, the clutch will have absorbed oil (make sure you turn the engine over a few times while you are installing the engine). The cork type material absorbs oil like a sponge. I always had spare motors in my race truck in the exact condition yours is in. I'd add trans oil and a shot of two stroke oil and turned the engine over a few time during...
This forum topic has 5 replies.
Tuna Liked a reply to forum topic Eddie Sanders
3/7/2020 10:02pm
Always does when ESR Tony shows up to the party.
This forum topic has 71 replies.
Tuna Liked a reply to forum topic Eddie Sanders
3/7/2020 10:01pm
You are one weird fucking dude. Tom Morgan and Eric Gorr must be thanking baby Jesus that you are not running their kits.
This forum topic has 71 replies.
DynoDan22 Liked a reply to forum topic Eddie Sanders
3/7/2020 9:58pm
I'm 200lbs and a 250 smoker can still light my ass up. I've never stretched the throttle cable wishing for more ponies. But maybe I'm slow. Lol
This forum topic has 71 replies.
Hudd_421 Liked a reply to forum topic Eddie Sanders
3/7/2020 9:58pm
"In my mind a 250 is to SMALL for most of us, not enough Torque on the Bottom There is no replacement for Displacement!" This tells me you are too lazy to shift or have poor technique
This forum topic has 71 replies.