Lives in:
NL
Member Since:
11/23/2015
Recent Activity
All
GB 911 Added a reply to Germany Riders
10/30/2021 11:56pm Do you know this app? You can find a lot of information about tracks. 
More »
GB 911 Added a reply to Germany Riders
10/30/2021 11:46pm Dorno Land https://www.motocrossdorno.com/en/ Ottobiano https://southmilanokarting.com/motocross/le-piste-motocross.html Both tracks within 1/2 hour drive of each other. It’s about 6.5 hour drive for you. Information about track conditions are on social media.
GB 911 Added a reply to Germany Riders
10/30/2021 1:40pm https://www.msc-grevenbroich.eu/ It’s a sand track and open year around.
GB 911 Added a reply to Germany Riders
10/30/2021 12:01pm Grevenbroich but it’s more than 4 hour drive from you.
GB 911 Added a reply to 2001 kx 250 front wheel offset
4/3/2021 3:05pm This is from my 98 kx250 measured from the disk side in CM. I hope it helps you. 
GB 911 Added a reply to How old were you guys when your parents stopped bringing you to the track?
1/27/2021 2:02pm I’t was around the time I got my license. My parents would always drive me to the track and support me. One day at a local race, about 20 years back, someone died and my dad tried to reanimate him. In 19 years time he has been to the track no more than 10 times. It was only since last...
GB 911 Added a reply to Bikes you are GLAD you sold..
12/25/2020 2:58pm I bought a new 2011 CRF450X, they where leftover 2009’s, as a second bike for offroad use. It was so much heavier and slower then my 2010 CRF450R that I rode on the track. Couldn’t get on terms with it.
Chance1216 Liked a reply to forum topic 1995 CR250 - Done
12/12/2020 12:36pm
But, he owns a Honda 😉
This forum topic has 147 replies.
GB 911 Added a reply to 1995 CR250 - Done
12/11/2020 10:57pm I would go for this more complete set. You can’t use the torque wrench. For straightening wheels or loosening spokes. You can use the solid wrench and still use the tips. These have a better fit on the nippels. The more complete set also comes with the extra tip that is used on KTM’s... 
GB 911 Added a reply to 1995 CR250 - Done
12/11/2020 10:29pm Yes the torque wrench.
GB 911 Added a reply to 1995 CR250 - Done
12/11/2020 2:17pm Great progress in your build by the way! Try to save the old spokes and nippels, they’re will clean up great when you zink plate them..
GB 911 Added a reply to 1995 CR250 - Done
12/11/2020 2:12pm Be sure to measure the offset of the center of your rim before you disable your old wheels. I have a excel spoke wrench. I have the wrench for 5 year now and regret not buying it 20 years earlier...
GB 911 Added a reply to Weirdest mechanical failure or problem
5/21/2020 8:02am Me and my buddy where riding in Austria. Guy next to us couldn’t start his bike. First we let him mess around but soon we start feeling sorry for him and we start helping him. Bike sounded like it was flooded. He had no spark plug with him but we had. So we changed the plug and it was completely...
GB 911 Added a reply to Kx 250 1991 transmission
5/10/2020 11:07pm Try vd Vegt they are located in Dalfsen in the Netherlands, close to the German boarder.
project premixed Liked a reply to forum topic 2018 Demo bike = Sweet deal?
4/24/2020 3:35am
That’s some very good advice thanks man
This forum topic has 69 replies.
GB 911 Added a reply to 2018 Demo bike = Sweet deal?
4/23/2020 10:05pm Congratulations on your new bike! Since this is your first new bike here are some tips. From the factory there often isn’t much grease in the steeringhead, pro-link and swingarm bearings. Re grease them. After a few hours check the bolds / nuts and spokes. They often come loose within a few hours of use. Maybe invest in some radiator...
GB 911 Added a reply to 1998 KX250 Build
4/3/2020 12:12pm I bought it from Dirk Timmer.
GB 911 Added a reply to What to check when viewing used bike ?
1/18/2020 3:17pm 1e If you have the chance, run the VIN to check if the bike is not reported stolen. 2e check if the cases have no repairs on them. 3e check underside of the frame for flat spots. 4e check swingarm, look if the chain has not been worn through the chainslider into the aluminum. 5e check the linkage for play...
GB 911 Added a reply to 1995 CR250 - Done
1/6/2020 10:29pm No I didn’t do anything Other than degrees them. I checked the threads and heads of every bold and made a list of all the oem Bolt specs for my bike. Every worn, damaged or incorrect piece was replaced.
