Recent Activity
All
final touch Started a new thread KX 125 Front Calliper Interchange
4/19/2022 12:29am I recently removed the pistons and seals from the front calliper of my 89 kx 125 and noticed there are scoring in one of the cylinders and corrosion where the seals locate so am looking to replace Does anyone no if a calliper of a different bike will bolt up and work or what other year kawi callipers work ?any...
This forum thread has 0 replies.
final touch Added a reply to 1989 KX 125 front brake issues
4/2/2022 2:53am Will give this a try thanks for the advice ,can you see any issues in the videos I posted or does everything look normal
More »
final touch Added a reply to 1989 KX 125 front brake issues
4/1/2022 8:40am The old fashioned way and then by back bleeding ,also left a cable tie around the front back over night ,might of made a slight difference but nothing much
final touch Added a reply to 1989 KX 125 front brake issues
4/1/2022 4:20am Thanks for that I’ll take a look
final touch Started a new thread 1989 KX 125 front brake issues
3/31/2022 10:04am Having issues with my front brake it doesn’t work very well at all very spongy ,so far I’ve rebuilt the master cylinder with new seals rebuilt the calliper new front disc as the old one was glazed ,and genuine nissin pads ,it already has a braided brake line.I’ve took these videos 1st one of the pistons one seems to come...
This forum thread has 6 replies.
final touch Started a new thread Fmf powercore 2 Vs powercore 2.1
11/12/2020 11:44am Other than aesthetics and the 2.1 being heavier , out on track would there be any difference between the two power wise ?I think the 2.1 looks a little nicer but the older version is cheaper ,would appreciate any information on this.
This forum thread has 9 replies.
final touch Added a reply to Fmf powercore 2 Vs powercore 2.1
11/10/2020 9:37am That’s better 😎 
final touch Added a reply to Fmf powercore 2 Vs powercore 2.1
11/8/2020 1:47am
Looks like dangerboy uses the older less expensive powercore 2 silencer on his 125
CornflakeJackson Liked a reply to forum topic Fmf powercore 2 Vs powercore 2.1
11/8/2020 1:43am
I think that looks really good!
This forum topic has 9 replies.
15tc150 Liked a reply to forum topic Fmf powercore 2 Vs powercore 2.1
11/7/2020 9:08am
They look pretty neat, I wasn’t all about them when they first came out, but they grew on me, if they just weren’t so expensive, and they are a bit heavier than the old style oval can, but still cool looking
This forum topic has 9 replies.
final touch Added a reply to Fmf powercore 2 Vs powercore 2.1
11/7/2020 8:38am Agreed it’s a nice looking exhaust but to big for a 125 IMO will be swapping it for a powercore 2 
WarrenMX Liked a reply to forum topic KTM 350- Ohlins or Cone Valve
6/6/2020 12:39pm
Love my Ohlins setup on my 18' KTM. It took me a little while to find the right setting (and the help of a friend), but man once I got them dialed in it felt like cheat mode. I learned a couple things when trying to get them dialed in. Firstly, one click on these things really makes a difference. On stock suspension I could easily go 3 clicks before I could feel the difference, thats not the case with these. Secondly, these things seem to perform a lot better higher in the stroke. I think a lot of people...
This forum topic has 85 replies.
riv187 Liked a reply to forum topic 17 TC 125 cutting out
8/15/2019 8:25am
Hi Dt210, I'll try to help you again...I HAVE a TC125. I'm not arm chair guessing. I had the same bog in middle that made the bike dangerous to ride on mx track. I didn't like the bike.I did play with mains and pilots. I installed the V-force to little avail. Went to a Denso IWM27 plug. Then I really started asking reading and going back over notes of other bikes I repaired. The KTMs are not identical and have better flowing airbox-hence less jetting problem. A WFO rider that never lets off will not feel the problem- they jet...
This forum topic has 131 replies.
final touch Added a reply to 18 kx250f oversteer help.....
8/12/2019 11:56pm Mine came with a 100 rear tire from new and was very much steer from the rear switched to a 110 and was loads better
final touch Added a reply to 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 8:57am Couple of measurements I’ve got from the piston along with a 53.96
final touch Added a reply to 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 8:56am
final touch Started a new thread 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 7:28am Have only been out on this bike 3 times ,the first time the head cracked so replaced that and all had been well ,stripped the head of it today and noticed scoring on the cylinder walls they were not there the last time I had it apart ,should I be worried about this? and what has caused it ?i run...
This forum thread has 16 replies.
final touch Added a reply to 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 6:46am
final touch Added a reply to 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 6:46am I believe this is the stick size piston 
final touch Added a reply to 2017 tc 125 cylinder wear *Pic Heavy*
8/12/2019 6:38am Thanks for your reply I don’t the cylinder had been touched before and is all original don’t no if it’s possible to tell by the pictures ?i did take it to a local engineer to get it honed but he said because it’s nikasil they can’t be honed and to just clean it up with a scotch brite ? I...