All

You still interested in the tank? If so check your email.

PM just said I sent you a PM. Email me at gearpounder@hotmail.com

I've got one you can have cheap. Bought it for my 87 thinking it was the same, it's not. I'll get a picture of it tonight if you think it'll work for you we can work out something.

Hope it helped, tracks should be in good shape and not too dry like they usually are with all this recent rain. Nice job in AZ, sounds like they had a great turnout. Like Barnett said turnout for this is usually pretty low may even worse this year as the other vintage club is racing at Glen Helen REM track...

Here's some video from the Calvmx race last Sunday at Perris, Evo 3. Short track with lap times around 1:07 so sign up for multiple classes if you want to get some seat time in.

There is a site on Facebook - "Vintage Honda CR Two Stokes up to1999" that has a service manual and an article by Eric Gorr that helps in setting the valves. Look under the file tab, they are free downloads, both will help. I ended up getting the linkage set so it opened to the right measurement (25mm open I...

I just stumbled on this post, that is going to be a great looking bike.I just finished this one a few weeks ago and got the first race on it last Sunday. Surprised at how well they handle especially the front end, and power is very smooth. For the frame I found Chevy engine block orange was a dead match...

Thanks, lots of good info there including the entire service manual. Give it a shot this weekend.

Pete, I'm in the same boat as Sandman, got a basket case 87 with the valves frozen so have no reference on how to put them back together. Here's a couple of pics on my first attempt. Set the levers to the position in the first photo with the e clip against the valve block. When I install the spindle...

Try replacing the pilot jet. I have an 07 YZ450 that I don't ride that much, does tha same thing after it sits for awhile. Local tuner told me the ethanol in the gas does bad things to the brass jets. At $5 it's a cheap fix.

Lewisburg, how could you forget! And don't be hatin on those White Castle mornings, that took some serious work. Your number stll 0236?

How about a 1975 Honda 175 4 stroke in a CR125 frame. Our local Honda mech used a SL100 lower end with spacer plate to mount a CB350 cylinder/head/cam cut in half. Got lots of stares and laughs until I passed the local cherry picker on his CamAm for the lead. The chain was a problom so he made a...

Don't know if you would remember me, Chip Didlake, hung with Ted Fischer, Tom Bellamy Gene Baehner, always ran into you and your dad at Winchester.

bulldog424101 - Are you the same Dave Mohr whose dad used to drink tomato juice and beer at Winchester?!

PFitzG38, the busted leg on Proride was a 40 pro on Sat. He hit a braking bump at the bottom of Mt St Helens at the drop off and over the bars. Not the same guy, Ken Neitzel I think.

I think it was David Brown #33 out of NV. I know he was in a first turn crash and got a ride in the loud red truck.

Went 12-10 Sat 50+ int for 10th overall. Sunday I harpooned Rocket88 's lower fork guard with my back brake pedal. Had a nice chat at the top of Mt St Helens while we tried to unook the bikes. [

In for +50 int. 613 white yam. Octobercross was fun this weekend, 3rd first moto, running 2nd in moto 2 until I got a flat. See you guys there this weekend for a rematch!

Evomx244- Searching some old posts found this with some familar names but you left out the fastest, Ted and Joe Fischer. How about Scott McPherson from Indy? We must have racer together at one point, I used to work with the Fishers and went to school with Bellamy. Did some road trips with the Forsythe's and had a Husky from...