Posts
97
Joined
10/12/2023
Location
Northern, VA, USA
KTM has had modern EFI 300cc 2ts for a while now. Then Kawasaki pushes the envelope to 327cc. Now Beta has a 350 2t! Will we see production 500cc 2ts once again? Will the "AMA" ever say Uncle and let 2ts compete in pro classes in some meaningful way?
Just make the 450 class open. Run what you brung. Also let 250 2T run against 250 4T in the 250 class.
And any 125 engine can be molded and run with 250fs
You've got the order wrong.
The Beta 350 was out last year. The KX327 still isn't in dealerships.
The KTM 350 should be out in 2028.
Just going full circle. KTM had 350 smokers in the early 90s, then back to the 360/380 in the late 90s/early 00s. Husky had 360s during that period as well.
This "new" trend is nothing new.
due to inflation, cc's aren't worth what they used to be
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
If that’s the case, why isn’t it happening?
KTM's 250F is pushing 50HP A built 125 would make max 40hp.
Canadian and euro cc are worth less to, due to the exchange rate.
New KTM 2-stroke MX bike is supposed to be a 360 or 380...pretty sure it's a 360 if I remember right.
modern 2 stroke engines are really friendly, a tm 300 is mellower than a 250 cr from the 90s
Back to the future.
It is an interesting trend. Still a bit confused at where these displacements are landing? 327? 350? 360? Not saying it’s wrong, just curious on the why?
Something 'Different', is the Why.
I've read here that the '327' has meaning for a lot of Car Heads - so, perhaps that.
And, I daresay as a 'starting back to 2 strokes engine', from Kawasaki, the 327, as I've said, ad nauseum, will be easily changed to a 250, or, the slightly bigger sizes as I have written about, elsewhere.
Before the Horsepower War really kicked in, aided by rapid development in Chassis and Suspension / Brakes etc, in the 500 , ( and well, all classes) class, there was quite the variety of capacities, within the class. Look it up, for those that are unfamiliar / young - there were a Lot of Capacities used in the 500 class, over many years.
And, the various manufacturers may be wanting to distinguish their somewhat larger than the norm 2 strokes, from each other - AKA - Difference! Or, that oft used ( and abused ) term, U.S.P.
The 350 KTMs of yesteryear ( Not the more recent , if you take 1998 - 2002 as being recent, with the 360 /380s ), shared the same basic engine architecture as the various '500s' - right up to the 540s.
I mention that - KTMs LH kick 350s to 540s - for those that will throw in crankcase volume as being a problem for say, the Kawasaki 327 being able to be made as a 250 - there are plenty of ways to address that.
A few manufacturers are recognizing that Top Level Motocross class capacity rules, are not of use to many. Well, the Vast amount of the buying public - something that does not fit in with MXGP or US SX / SX Handicap Class rules is Not of concern to most people = The people that Buy Bikes, and Ride them.
And, it appears now, that many / most lower level, racing, allows equivalency, so, the buying public that Do compete, are Not buying Orphan Bikes when it comes to new , bigger than 250, 2 strokes.
As far as I know, in GNCC, equivalency is enabled, even in the Pro classes.
The Enduro World Championships / Enduro GPs, has E1 ( 250s of both types, together ) = Equivalency. E2 has rules that doesn't list 2t sizes ( 255cc 4t to max 450 4t ), that by default / design very much make it a 4 stroke class , and the E3 , that has over 255cc for 2t, and over 455cc for 4 strokes.
Oh, and PS : in EWC /WEC / Enduro GP, they allow E bikes in those classes - but, I've not gone into those rules for whatever requirements they must meet, for each class. .
Hey, we are getting New Two Strokes - Why TF is there a problem with that, Boys and Girls?
A ported, head modded, etc 250 2t is more than enough power for anyone.
I would prefer a purpose built 150 like the pre-2016 ktm, or the TM144 for MX and for trail/ Hare Scramble. A 300+ just seems too big.
That's track dependent, tracks with long straights reward displacement.
Bring back tracks with short straights, lots of corners, lower speeds, less severe injuries.
Does a faster bike with bigger displacement make for better racing on a supercross or motocross track?
Any 2 stroke development is great to see, in my opinion. At the local tracks here in southwest PA we are probably better than 50% 2 strokes on practice days. It looks like maybe the OEMs are catching on?
Post a reply to: 2t Displacement Creep!