21 yz250f

Lynch
Profile picture for user Lynch
Posts
728
Joined
3/14/2015
Location
SE
Lynch 4/23/2021 10:02am
4/23/2021 10:02am
Skerby wrote:
Anyone know if this will mount up? [img]https://p.vitalmx.com/photos/forums/2021/04/23/489159/s1200_skid.jpg[/img] Seems like a much cheaper alternative to the acerbis plates that probably fits better.
Anyone know if this will mount up?


Seems like a much cheaper alternative to the acerbis plates that probably fits better.
Is that the WR/FX skidplate ? If so it will not.
PJRAUS
Profile picture for user PJRAUS
Posts
1531
Joined
5/28/2016
Location
AU
PJRAUS 4/23/2021 4:25pm
4/23/2021 4:25pm
PJRAUS wrote:
Why is that? I was just looking at a monster edition on a dealer floor today and it had me sporting wood! The regular one beside...
Why is that? I was just looking at a monster edition on a dealer floor today and it had me sporting wood! The regular one beside it looked very plain Jane by comparison,.
Do the monsters just look shit after you've ridden them a few timex or something?
Sachmo831 wrote:
A lot of guys just don't want a giant monster logo on their bike. To me the monster edition looks more like a fmx bike than...
A lot of guys just don't want a giant monster logo on their bike. To me the monster edition looks more like a fmx bike than a proper moto bike.
navalseabee wrote:
Monster ain't helping me then i ain't running their logo, especially not going to pay more for it.
Yeah, I get it...Im not into energy drinks either but I do realise that without the energy drinks the top end of our sport would be left without any big dollar sponsorship and would therefore be pretty much screwed, so I would be happy enough to buy a monster edition 250f. I think it looks beautiful on the show room floor but suspect it might look a bit ordinary once it gets scuffed up..
I have that new bike urge again...Id like a new 125, but not until I see if the new yz 125 rumour is real...not holding my breath..
Rode several laps on a brand new 2019 yz 250 f when they first came out and was amazed..my 20 model 450 is incredible, but honestly its too much for me...
Really love my Yamaha's..
3
JBecker 72
Profile picture for user JBecker 72
Posts
1809
Joined
3/25/2014
Location
Eastern Panhandle, WV, USA
JBecker 72 5/8/2021 12:27pm
5/8/2021 12:27pm
Finally scored a GYTR tall seat!
3
Richy
Profile picture for user Richy
Posts
3093
Joined
7/18/2020
Location
UK, GB
Richy 5/8/2021 2:22pm
5/8/2021 2:22pm
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
4

The Shop

See All »
Zycki11
Profile picture for user Zycki11
Posts
7804
Joined
4/1/2008
Location
Edwardsville, IL, USA
Zycki11 5/8/2021 3:43pm
5/8/2021 3:43pm
Richy wrote:
Serious question, am I the only one who doesn't dislike the intake noise? I may just be typically predisposed to like induction noise courtesy of playing...
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
From what I have seen, many people started wearing ear plugs because of it. Personally, it never bothered me. You get used to it.
2
tobz
Profile picture for user tobz
Posts
3891
Joined
3/5/2007
Location
Adelaide, AU
tobz 5/8/2021 4:43pm
5/8/2021 4:43pm Edited Date/Time 5/8/2021 4:43pm
Skerby wrote:
Anyone know if this will mount up? [img]https://p.vitalmx.com/photos/forums/2021/04/23/489159/s1200_skid.jpg[/img] Seems like a much cheaper alternative to the acerbis plates that probably fits better.
Anyone know if this will mount up?


Seems like a much cheaper alternative to the acerbis plates that probably fits better.
Lynch wrote:
Is that the WR/FX skidplate ? If so it will not.
Why wouldn’t the WR skid plate fit? Most of my parts I’ve been ordering for my ‘20 WR have been the same part numbers for the 19-21 YZF.

Did the frame drastically change in ‘21?
Polish Power
Profile picture for user Polish Power
Posts
179
Joined
8/24/2018
Location
Delmar, NY, USA
Polish Power 5/8/2021 5:00pm
5/8/2021 5:00pm
Any of you guys still waiting for your bike to come in? Mine is supposed to be in sometime this month. I cant believe these dealers cant track these bikes better. I ordered a truck back in February and I tracked it every step of the way, including the shipping.
sandtrack315
Profile picture for user sandtrack315
Posts
2841
Joined
7/19/2013
Location
Philadelphia, PA, USA
sandtrack315 5/8/2021 5:08pm
5/8/2021 5:08pm
Richy wrote:
Serious question, am I the only one who doesn't dislike the intake noise? I may just be typically predisposed to like induction noise courtesy of playing...
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
Zycki11 wrote:
From what I have seen, many people started wearing ear plugs because of it. Personally, it never bothered me. You get used to it.
I heard it riding to the track in the pits the first time I rode it and haven’t noticed it since.
2
JBecker 72
Profile picture for user JBecker 72
Posts
1809
Joined
3/25/2014
Location
Eastern Panhandle, WV, USA
JBecker 72 5/8/2021 6:59pm
5/8/2021 6:59pm
Got everything installed so far. Just need some time to ride it. Hopefully next Saturday I can take it out.

10
Leeham
Profile picture for user Leeham
Posts
1159
Joined
10/29/2018
Location
Rochester, WA, USA
Leeham 5/8/2021 10:53pm
5/8/2021 10:53pm
Richy wrote:
Serious question, am I the only one who doesn't dislike the intake noise? I may just be typically predisposed to like induction noise courtesy of playing...
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
Ive pondered wearing ear plugs. To me, its not THAT loud, I mean its defintely louder than the Honda I had but not unbearable. And im on the limiter a lot so its making noise lol. I just dont like giving up my ability to hear faster traffic coming up behind me so I go so open ears. But I do feel bad for people directly behind me or anyone behind a YZ250F, its the loudest bike to sit behind imo
1
wideopen198 5/9/2021 6:30am
5/9/2021 6:30am
Richy wrote:
Serious question, am I the only one who doesn't dislike the intake noise? I may just be typically predisposed to like induction noise courtesy of playing...
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
I love the intake noise and raspy sound of the stock exhaust. Gives me a stiffy every time I crack the throttle Laughing
5
Skerby
Profile picture for user Skerby
Posts
1282
Joined
4/9/2013
Location
Mayes County, OK, USA
Skerby 5/10/2021 6:56am
5/10/2021 6:56am
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though, having better luck with MXAs maps but it still isnt very clean.

Thinking about trying stock map again, never really gave that one a shot.
Zycki11
Profile picture for user Zycki11
Posts
7804
Joined
4/1/2008
Location
Edwardsville, IL, USA
Zycki11 5/10/2021 7:10am
5/10/2021 7:10am
Skerby wrote:
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though...
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though, having better luck with MXAs maps but it still isnt very clean.

Thinking about trying stock map again, never really gave that one a shot.
Spend $75 and have it remapped by Tokyo mods for your location. Or spend $600 and buy a vortex snd have it mapped by twisted development and you will see large gains on the bike.
1
AH387
Profile picture for user AH387
Posts
1662
Joined
8/29/2019
Location
Bridgeville, PA, USA
AH387 5/10/2021 7:22am
5/10/2021 7:22am
Richy wrote:
Serious question, am I the only one who doesn't dislike the intake noise? I may just be typically predisposed to like induction noise courtesy of playing...
Serious question, am I the only one who doesn't dislike the intake noise?

I may just be typically predisposed to like induction noise courtesy of playing with cars for years.
It doesn't even bother me, to be honest. I never really noticed it as an annoyance or consider it to be that big of a deal. I ran the Cycra Powerflow should/airbox set-up on my previous-gen model and on my '21 I have the No Toil cage-less set-up and it never even crosses my mind. It's weird that so many people complain about it, since to me I don't even think about it. The exhaust, I can at least understand, since it is very loud and raspy. But the intake noise seems like way less of an annoyance. I actually like how the bike sounds, in general and it doesn't annoy me, personally.
3
1
PTshox
Profile picture for user PTshox
Posts
1589
Joined
10/1/2011
Location
Highland Village, TX, USA
PTshox 5/10/2021 2:45pm
5/10/2021 2:45pm
Skerby wrote:
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though...
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though, having better luck with MXAs maps but it still isnt very clean.

Thinking about trying stock map again, never really gave that one a shot.
Zycki11 wrote:
Spend $75 and have it remapped by Tokyo mods for your location. Or spend $600 and buy a vortex snd have it mapped by twisted development...
Spend $75 and have it remapped by Tokyo mods for your location. Or spend $600 and buy a vortex snd have it mapped by twisted development and you will see large gains on the bike.
Did you try the tokyo mod remap? If so can you talk about how it affected the motor? Curious... Have a 2020 250FX and if it makes it run a little stronger I'm game... )
Zycki11
Profile picture for user Zycki11
Posts
7804
Joined
4/1/2008
Location
Edwardsville, IL, USA
Zycki11 5/10/2021 3:19pm
5/10/2021 3:19pm
Skerby wrote:
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though...
Anyone have good maps for the PNW? I ran keefers maps in eastern washington and they were good. They run like shit on the coast though, having better luck with MXAs maps but it still isnt very clean.

Thinking about trying stock map again, never really gave that one a shot.
Zycki11 wrote:
Spend $75 and have it remapped by Tokyo mods for your location. Or spend $600 and buy a vortex snd have it mapped by twisted development...
Spend $75 and have it remapped by Tokyo mods for your location. Or spend $600 and buy a vortex snd have it mapped by twisted development and you will see large gains on the bike.
PTshox wrote:
Did you try the tokyo mod remap? If so can you talk about how it affected the motor? Curious... Have a 2020 250FX and if it...
Did you try the tokyo mod remap? If so can you talk about how it affected the motor? Curious... Have a 2020 250FX and if it makes it run a little stronger I'm game... )
Having the stock remap makes the bike run cleaner. If you were to buy the vortex this is where you will see pretty good gains. The vortex will increase bottom end while extending the power range and over-rev. Much better money spent over a pipe at first. They can tailor the power as well to your liking.
1
Grizz
Profile picture for user Grizz
Posts
3105
Joined
7/2/2012
Location
Los Angeles, CA, USA
Grizz 5/12/2021 1:49pm
5/12/2021 1:49pm
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid June. Need one before May 29th...
Jesse318pnw
Profile picture for user Jesse318pnw
Posts
175
Joined
4/22/2020
Location
Snoqualmie, WA, USA
Jesse318pnw 5/12/2021 1:56pm
5/12/2021 1:56pm Edited Date/Time 5/12/2021 1:57pm
Grizz wrote:
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid...
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid June. Need one before May 29th...
Nothing on a pipe. Do FMF and PC have ANY sales right now? I understand demand has spiked but it seems like there is zero supply. Where are the products they are building going?

there is the FMF slip on for $679 on EBAY.

Anyway, I'm not in a hurry it just seems interesting.

Pit Row

See All »
Grizz
Profile picture for user Grizz
Posts
3105
Joined
7/2/2012
Location
Los Angeles, CA, USA
Grizz 5/12/2021 2:57pm
5/12/2021 2:57pm
Grizz wrote:
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid...
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid June. Need one before May 29th...
Jesse318pnw wrote:
Nothing on a pipe. Do FMF and PC have ANY sales right now? I understand demand has spiked but it seems like there is zero supply...
Nothing on a pipe. Do FMF and PC have ANY sales right now? I understand demand has spiked but it seems like there is zero supply. Where are the products they are building going?

there is the FMF slip on for $679 on EBAY.

Anyway, I'm not in a hurry it just seems interesting.
I was told no raw materials. It’s crazy! I’ll gladly buy a used one haha
Zycki11
Profile picture for user Zycki11
Posts
7804
Joined
4/1/2008
Location
Edwardsville, IL, USA
Zycki11 5/12/2021 7:13pm
5/12/2021 7:13pm
Grizz wrote:
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid...
Anyone able to get a pipe? Need one and can’t even get one through sponsors. Ordered over a month ago and now I’m being told mid June. Need one before May 29th...
Jesse318pnw wrote:
Nothing on a pipe. Do FMF and PC have ANY sales right now? I understand demand has spiked but it seems like there is zero supply...
Nothing on a pipe. Do FMF and PC have ANY sales right now? I understand demand has spiked but it seems like there is zero supply. Where are the products they are building going?

there is the FMF slip on for $679 on EBAY.

Anyway, I'm not in a hurry it just seems interesting.
Grizz wrote:
I was told no raw materials. It’s crazy! I’ll gladly buy a used one haha
Talk to Donn Lieb at Rocket Exhaust. He does great work and can personalize the power you like.
2
tek14
Profile picture for user tek14
Posts
4927
Joined
1/26/2014
Location
Vantaa, FI
tek14 5/12/2021 10:59pm
5/12/2021 10:59pm
Pipes been sold out all 2021 here in EU.
If you are lucky you can get one if small local shop has them laying back of their warehouse but not online anywhere.
For 450f there are some left but local shop told ones for yz/wr250f are coming later in small amount.
andrewcrc
Profile picture for user andrewcrc
Posts
1
Joined
5/19/2021
Location
Las Vegas, NV, USA
andrewcrc 5/19/2021 11:58am
5/19/2021 11:58am
Any lighter riders out there? My son is maybe 130lbs (and eats a freakin ton!). Any recommendations on suspension?
AH387
Profile picture for user AH387
Posts
1662
Joined
8/29/2019
Location
Bridgeville, PA, USA
AH387 5/19/2021 2:14pm
5/19/2021 2:14pm
I know my friend waited a bit to get a FMF for his KTM 150 and basically couldn't find a PC anywhere. I was in no rush to get one for my YZF, but I'm not shocked that they are hard to come by.
Vincent505
Profile picture for user Vincent505
Posts
4
Joined
4/23/2021
Location
Los Angeles, CA, USA
Vincent505 5/24/2021 11:02pm
5/24/2021 11:02pm
Motofinne wrote:
I destroyed a pair of Tech 10s on my 2020 250 because of the header protector when i kept getting stuck on it coming into lefthand...
I destroyed a pair of Tech 10s on my 2020 250 because of the header protector when i kept getting stuck on it coming into lefthand turns, and a friend of mine did the same with his 2019. It's a horrible design, i can't understand how the Yamaha test riders haven't had the same issues and fixed it yet.

This was my ghettomod solution for it. See the black steel plate, not pretty but it beats ruining expensive boots every other week.

I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot. I’m thinking about buying an aftermarket full system exhaust on down the road & wonder if that would make a difference for the header to not interfere with the left boot.
Lynch
Profile picture for user Lynch
Posts
728
Joined
3/14/2015
Location
SE
Lynch 5/25/2021 3:17am
5/25/2021 3:17am
Vincent505 wrote:
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot...
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot. I’m thinking about buying an aftermarket full system exhaust on down the road & wonder if that would make a difference for the header to not interfere with the left boot.
It will interfere, best solution I found was carbon covers from Pro Carbon.
1
Timo
Profile picture for user Timo
Posts
1442
Joined
1/9/2021
Location
Wichita, KS, USA
Timo 5/25/2021 5:24am
5/25/2021 5:24am
Vincent505 wrote:
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot...
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot. I’m thinking about buying an aftermarket full system exhaust on down the road & wonder if that would make a difference for the header to not interfere with the left boot.
Lynch wrote:
It will interfere, best solution I found was carbon covers from Pro Carbon.
Interesting, on my 450 I've melted a hole in 2 pairs of pants on my left leg, the leather patch needs to be bigger. Never had issues with the boot catching though.
Leeham
Profile picture for user Leeham
Posts
1159
Joined
10/29/2018
Location
Rochester, WA, USA
Leeham 5/25/2021 11:02am
5/25/2021 11:02am
Some boot designs catch much worse than other it seems
JBecker 72
Profile picture for user JBecker 72
Posts
1809
Joined
3/25/2014
Location
Eastern Panhandle, WV, USA
JBecker 72 5/25/2021 11:41am
5/25/2021 11:41am
Leeham wrote:
Some boot designs catch much worse than other it seems
I really haven’t had a problem with it and my SG12 boots.
Motofinne
Profile picture for user Motofinne
Posts
11490
Joined
1/4/2014
Location
FI
Motofinne 5/25/2021 11:50am
5/25/2021 11:50am
Vincent505 wrote:
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot...
I just bought a 2020 and I had the same issue. After a lap I took the heat shield off but it slightly melted my boot. I’m thinking about buying an aftermarket full system exhaust on down the road & wonder if that would make a difference for the header to not interfere with the left boot.
Lynch wrote:
It will interfere, best solution I found was carbon covers from Pro Carbon.
Timo wrote:
Interesting, on my 450 I've melted a hole in 2 pairs of pants on my left leg, the leather patch needs to be bigger. Never had...
Interesting, on my 450 I've melted a hole in 2 pairs of pants on my left leg, the leather patch needs to be bigger. Never had issues with the boot catching though.
It's a 250F thing, i had a 18 and 19 450 and didn't experience the same issue as with the 2020 250F.
1
Leeham
Profile picture for user Leeham
Posts
1159
Joined
10/29/2018
Location
Rochester, WA, USA
Leeham 5/25/2021 12:51pm
5/25/2021 12:51pm
Leeham wrote:
Some boot designs catch much worse than other it seems
JBecker 72 wrote:
I really haven’t had a problem with it and my SG12 boots.
Same with my SG12s. Zero problems. My old GX1s got hooked up 3 times. Once in the air so that was a good scare

Post a reply to: 21 yz250f