How many members own an RM250?

mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 1/26/2019 7:44am
1/26/2019 7:44am
drvnfast : Be ready for some serious headshake! This era of suzuki's shook like a wet dog!
SwingHard
Profile picture for user SwingHard
Posts
482
Joined
3/14/2017
Location
Sacramento, CA, USA
SwingHard 1/26/2019 8:02am
1/26/2019 8:02am
My very low hours 08'
4
1
drvnfast
Profile picture for user drvnfast
Posts
74
Joined
2/19/2011
Location
Georgetown, TX, USA
drvnfast 1/26/2019 8:19am
1/26/2019 8:19am Edited Date/Time 1/26/2019 8:49am
mxracer666 wrote:
drvnfast : Be ready for some serious headshake! This era of suzuki's shook like a wet dog!
Good to know. Anything I can do to help mitigate that short of switching the entire front end over to a newer RM/RMZ?
mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 1/26/2019 12:51pm
1/26/2019 12:51pm
Get a recommendation on the proper rate fork springs for your weight. Drop the forks as far as possible in the clamps. Run a lot of sag in the rear (105+ maybe). These bikes were notorious for headshake and being unstable at speed on a MX track. I believe Alberteen rode for Suzuki those years and remember watching him headshake and swap from one side of the track to the other at Glen Helen (and this was a factory Suzuki), for the entire 2 motos. While evey other bike looked stable and tracked straight. Good luck!

The Shop

See All »
mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 1/26/2019 12:56pm
1/26/2019 12:56pm
It's not necessarily the forks, but the frame geometry Suzuki was using at that time. 2004-on were/are really good bikes, but still much busier than a Honda (but the Honda's still turned well, without the busy feel)
1
mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 1/26/2019 1:57pm
1/26/2019 1:57pm
great! enjoy your ride and don't be afraid to make adjustment to the fork height , etc!
RockyMtnMX
Profile picture for user RockyMtnMX
Posts
27
Joined
11/14/2016
Location
Denver, CO, USA
RockyMtnMX 1/26/2019 6:35pm
1/26/2019 6:35pm
Sure do...2006 RM250 - I love this bike.
3
Pirate421
Profile picture for user Pirate421
Posts
1826
Joined
7/26/2015
Location
USA
Pirate421 1/26/2019 6:54pm
1/26/2019 6:54pm
RockyMtnMX wrote:
Sure do...2006 RM250 - I love this bike. [img]https://p.vitalmx.com/photos/forums/2019/01/26/320913/s1200_IMG_2447.jpg[/img]
Sure do...2006 RM250 - I love this bike.
Please don’t cut your side number plates!
racer480
Profile picture for user racer480
Posts
35
Joined
8/20/2011
Location
Cedar Rapids, IA, USA
racer480 1/26/2019 8:03pm
1/26/2019 8:03pm
I've had a few. Here's my 2003 I just gave to my son.
RockyMtnMX
Profile picture for user RockyMtnMX
Posts
27
Joined
11/14/2016
Location
Denver, CO, USA
RockyMtnMX 1/26/2019 8:23pm
1/26/2019 8:23pm
RockyMtnMX wrote:
Sure do...2006 RM250 - I love this bike. [img]https://p.vitalmx.com/photos/forums/2019/01/26/320913/s1200_IMG_2447.jpg[/img]
Sure do...2006 RM250 - I love this bike.
Pirate421 wrote:
Please don’t cut your side number plates!
nope.....i'm ok with the stock shape....it does have an RMZ front plate and fender
tb901
Profile picture for user tb901
Posts
62
Joined
4/1/2008
Location
Cinti, OH, USA
Fantasy
63rd
tb901 1/29/2019 5:52am
1/29/2019 5:52am
mxracer666 wrote:
drvnfast : Be ready for some serious headshake! This era of suzuki's shook like a wet dog!
drvnfast wrote:
Good to know. Anything I can do to help mitigate that short of switching the entire front end over to a newer RM/RMZ?
What mxracer666 said. To add to that, in 2004 Suzuki changed the offset to 22.5 from 24.5. If you can find a set of 2001-2003 triple clamps, and run a little bit more sag, I think you'll be surprised at the improvement, at least I was. Even with these changes the RM still turns as good if not better than any bike I've ridden. Good luck
H4L
Profile picture for user H4L
Posts
2595
Joined
3/18/2016
Location
USA
H4L 1/29/2019 7:44am
1/29/2019 7:44am
mxracer666 wrote:
It's not necessarily the forks, but the frame geometry Suzuki was using at that time. 2004-on were/are really good bikes, but still much busier than a...
It's not necessarily the forks, but the frame geometry Suzuki was using at that time. 2004-on were/are really good bikes, but still much busier than a Honda (but the Honda's still turned well, without the busy feel)
Have owned a few RM 2t's dating back to an 84 RM125 with the newest ones being a couple 06 RM250's. The 04+ models are still very unstable in comparison to the CR or YZ. Here is the latest one I own. Contemplating putting an aftermarket link to see if it helps with the busy chassis geometry.



2
mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 1/30/2019 10:44pm
1/30/2019 10:44pm
H4L : That's a nice looking RC replica! A linkage arm is a big help on these Suzuki's, and you will lose very little of the turning sharpness. Well-worth the money! Still a busy bike tho...
1
digger
Profile picture for user digger
Posts
800
Joined
4/1/2008
Location
Upstate, NY, USA
digger 1/30/2019 11:44pm
1/30/2019 11:44pm
This was the last one that I owned, an 07’ that I sold last summer.
H4L
Profile picture for user H4L
Posts
2595
Joined
3/18/2016
Location
USA
H4L 1/31/2019 6:09am
1/31/2019 6:09am
mxracer666 wrote:
H4L : That's a nice looking RC replica! A linkage arm is a big help on these Suzuki's, and you will lose very little of the...
H4L : That's a nice looking RC replica! A linkage arm is a big help on these Suzuki's, and you will lose very little of the turning sharpness. Well-worth the money! Still a busy bike tho...
Yep. Owned another 06 model about 10 yrs. ago that put me on the ground a few times even after having some RG3 suspension work done. I'm not expecting it to be stable like the CR chassis, but looking for something that's ride-able at a moderate speed. Thnxz..
Jbulz
Profile picture for user Jbulz
Posts
871
Joined
3/29/2016
Location
Ithaca, NY, USA
Jbulz 1/31/2019 6:23am
1/31/2019 6:23am
mxracer666 wrote:
H4L : That's a nice looking RC replica! A linkage arm is a big help on these Suzuki's, and you will lose very little of the...
H4L : That's a nice looking RC replica! A linkage arm is a big help on these Suzuki's, and you will lose very little of the turning sharpness. Well-worth the money! Still a busy bike tho...
H4L wrote:
Yep. Owned another 06 model about 10 yrs. ago that put me on the ground a few times even after having some RG3 suspension work done...
Yep. Owned another 06 model about 10 yrs. ago that put me on the ground a few times even after having some RG3 suspension work done. I'm not expecting it to be stable like the CR chassis, but looking for something that's ride-able at a moderate speed. Thnxz..
I gave up on mine. Never got hurt on a bike as much as my 06 lol. Great looking and sounding bike, but Jesus is that chassis unstable
1
Huckster
Profile picture for user Huckster
Posts
2592
Joined
8/15/2006
Location
Woodstock, NY, USA
Huckster 12/17/2022 12:26pm
12/17/2022 12:26pm Edited Date/Time 12/17/2022 12:26pm

Does a 1997 250 count?

 

10

Pit Row

See All »
Thisusernameisavailable 12/17/2022 1:18pm
12/17/2022 1:18pm
Huckster wrote:
Does a 1997 250 count?  

Does a 1997 250 count?

 

They all count brother! 
that thing is sweet! 
 

but did you really pay nearly 500 dollars for that decal set??

Chatmore
Profile picture for user Chatmore
Posts
1579
Joined
11/22/2022
Location
Memphis, TN, USA
Chatmore 12/17/2022 1:27pm
12/17/2022 1:27pm

Is that the McGrath replica?

1
Thisusernameisavailable 12/17/2022 1:47pm
12/17/2022 1:47pm
Chatmore wrote:

Is that the McGrath replica?

Yes. It was a factory bike run under the Suzuki of Troy banner.
 

the official factory team of Albertyn & Larocco

ran slightly different grAphics.  

 

1
Chatmore
Profile picture for user Chatmore
Posts
1579
Joined
11/22/2022
Location
Memphis, TN, USA
Chatmore 12/17/2022 2:16pm
12/17/2022 2:16pm

That is gorgeous. Always loved those bikes and graphics. 

mooch
Profile picture for user mooch
Posts
1864
Joined
2/16/2008
Location
USA
Fantasy
75th
mooch 12/17/2022 2:33pm
12/17/2022 2:33pm

For post vintage racing have an RM250 and feel it's one of the best bikes for post vintage due primarily to the fantastic rear suspension.  Have gold valves front and rear on this bike and suspension feels great, especially considering the bike is 38 years old.  Do not care for the stock seat that is tall in the back and low in the middle so I put a flatter fat seat on it to make it easier to slide back and forth on the bike in corners. The bike is a 1985 but since the 1985 had a front disc brake, I put an 84 front end on it so that a drum brake could be used which makes it post vintage legal.  Bike runs great...had 13 holeshots in a row over the course of two seasons. 

 image-20221217173246-1

3
mxracer71
Profile picture for user mxracer71
Posts
490
Joined
7/1/2017
Location
Queen Creek, AZ, USA
mxracer71 12/17/2022 3:01pm
12/17/2022 3:01pm Edited Date/Time 12/17/2022 3:02pm

Always been a Honda guy,rode the Zuke and the bike is amazing. Power is super smooth and easy to ride.

 

5
1
Huckster
Profile picture for user Huckster
Posts
2592
Joined
8/15/2006
Location
Woodstock, NY, USA
Huckster 12/17/2022 3:14pm
12/17/2022 3:14pm
Thisusernameisavailable wrote:

They all count brother! 
that thing is sweet! 
 

but did you really pay nearly 500 dollars for that decal set??

I did not.

JWACK
Profile picture for user JWACK
Posts
2588
Joined
8/7/2009
Location
USA
JWACK 12/17/2022 3:26pm
12/17/2022 3:26pm

 RM ARMY! 

1
1
AMDnutt
Profile picture for user AMDnutt
Posts
84
Joined
3/7/2015
Location
Fort Wayne, IN, USA
AMDnutt 12/17/2022 3:40pm
12/17/2022 3:40pm Edited Date/Time 12/17/2022 3:41pm

No 250's, but two 2003 125's...

 

6
Dingleberrycerealwithbullmilk 12/17/2022 8:21pm
12/17/2022 8:21pm

Sadly sold my 05 a couple years ago for the same reason as Pastrana.... Parts availability. I owned several and would probably have a new one in my garage if Suzuki still offered them to us. The bike would be a money maker for Suzuki, but apparently someone in Japan eats Dingleberry cereal with bull milk for breakfast.

2
Justin_P
Profile picture for user Justin_P
Posts
121
Joined
6/13/2019
Location
Hollis Center, ME, USA
Justin_P 12/18/2022 5:00am
12/18/2022 5:00am

 My 01

1
CR92
Profile picture for user CR92
Posts
610
Joined
1/27/2010
Location
Beaverton, OR, USA
Fantasy
1306th
CR92 12/18/2022 7:41am
12/18/2022 7:41am

Does it count if I want to own an RM250? If not, all we have is an 05' RM125. 

Post a reply to: How many members own an RM250?