Added reply in a thread 2022 CRF250R 12/2/2021 11:02 AM

I have the Pirelli 110/85/19 on my 22 with a 2:15 rim. Would of worked fine on stock 1:85 rim. Same height as stocker just wider. The 110/90/19 dunlop is nearly 1" taller that the stock pirelli It raised the back too much, I assume it should of been ... more »

Added reply in a thread 2021 Gas Gas MC 450 for sale 7/12/2021 5:10 PM

Yes text me at the number in post after 7am or before 9pm central time .mention gas gas in text

Added reply in a thread 2021 Gas Gas MC 450 for sale 7/9/2021 10:22 AM

We don't need titles around here . Why pay tax on 9k if you don't need to . I have receipt from dealer & factory paper work. The dealer would be more than happy to confirm I was the purchaser. I've had 50 or more bikes over the years & maybe ... more »

Started new thread 2021 Gas Gas MC 450 for sale 7/9/2021 7:24 AM

For sale is my 2021 Gas Gas MC 450 . 12.5 hours , Hole shot devise, Baffle removed from stock muffler, Map switch added , Works connection 90 degree air fill adapter for fork , Shock was revalved , The damping was too light for the 5.2 kg shock spring

... more »

This forum thread has 6 replies

Added reply in a thread WP KYB Conversion oil level 6/18/2021 10:33 AM

Enzo spring tubes for reference.

Added reply in a thread WP KYB Conversion oil level 6/18/2021 10:31 AM

Enzo has national style spring tubes as an option for his KYB kits. He told me 325 w spring tubes .360 with stock spring seats. spring tubes give a bit less mid stroke harshness/ spike as you raise oil level. The difference in oil amount was what the ... more »

Added reply in a thread Bar 2 Bar MX Kansas 6/4/2021 7:30 AM

Sand base. Depending on the amount of riders will determine roughness . You won't need a sand tire however. While you are in the area Midwest Extreme MX in Merwin MO is good also. MX track, Straight rhythm, pit bike track, Trails ,170 acre park. Adrenaline ... more »

Added reply in a thread Will we see a gas gas fe this year 12/3/2020 7:36 AM

This belongs to a friend of mine. I like it.
Added reply in a thread (need help) SDI low friction shock piston bushing KX450 10/16/2020 4:34 PM

I have ran them on ktm's . It will slide more freely. Feels like a low speed shim was removed from the stack. Noticed it more on compression than rebound for what that is worth. Track hack will have a slightly improved feel. Never used one on a shock ... more »

Added reply in a thread Let's see/review those 2019 kx450s 10/16/2020 5:43 AM

I recently helped someone who was having a clutch issue . He said he removed the judder. When i took it all apart to inspect it. I noticed he left 1 of the 3 pieces of the judder assembly in the clutch. He removed the thin friction and the disk spring ... more »

Added reply in a thread CRF450 Cylinder Pitting 10/15/2020 2:09 PM

It is caused by air bubbles trapped when the cylinder is cast. During plating it shows up as what you see. Looks bad but has little to no effect of performance. Check out millennium plating web site They have a good article on this subject.

Added reply in a thread Headshake new kx. 8/26/2020 7:28 AM

Are you still on stock fork springs? If you are over 170 lbs you will need to go up on the rate. Florida ? sand would make it worse . Make sure tire psi is correct.

Added reply in a thread 2021 RMZ450 8/6/2020 1:06 PM

No its a legit deal .He bought it tried to sell it after it was purchased & just kept it as no one was buying. It's been listed a few times over last last couple years. So looks like a blow out price now just to get rid of it. I have known the guy ... more »

Added reply in a thread Private track sprinkler system questions 8/5/2020 10:38 AM

Sprinkler system.. PVC pipe is always broken the riser to heads are always run over hit with mower ect. Had cattle trample a few. The assuming you are pulling from a pond the heads will need cleaned often. Pump $1000.00 $ 2500.00 in pipe & materials ... more »

Added reply in a thread Benny Has a New Ride! 7/26/2020 3:17 PM

He has trax shock , 52mm forks , twisted head work & ignition. & was in thor gear As of today.

Added reply in a thread KTM Husky 250F Crank Wear 7/16/2020 6:05 AM

Those KTM cranks are nice pieces. The one in the pic had 120 hours of female mx. A friends wife. If it were to be trail ridden I would of not rebuilt it for her . Before disassembly it had run out of .0015 But the side to side clearance to thrust washers

... more »
Added reply in a thread Hour counter 7/15/2020 5:23 AM

Just wrap the wire around the coil packs it will work. Zip tie the Hour meter somewhere out of the way safe.

Added reply in a thread Honda CR250/480 clutch hub 6/4/2020 8:40 AM

This is out of a 83- 480

... more »
Added reply in a thread 19-20 kx450 titanium motor mounts (looking) 5/28/2020 8:40 AM

zeke27g text me at 5pm your time # in post. If OP doesn't want them Ill let you know. Thanks

Added reply in a thread 19-20 kx450 titanium motor mounts (looking) 5/28/2020 5:24 AM

I have these they came on a 19 kx450 I flipped. I want to say works chassis lab but not sure. They appear low hours & show hardly any wear. By the size of the cut outs ect appear to be soft mounts. If anyone has any input that would be great. $240.00

... more »