Added reply in a thread Does RC like to "Go for it"? 3/21/2021 2:05 PM

Guys we just need to turn a negative into a positive.

Added reply in a thread Do you think this is b*******? 10/22/2020 7:12 PM

Well then come on back to Bama any time you like!

Added reply in a thread Front end tuck 9/20/2020 5:46 AM

Sorry I forgot to add that I have stiffened the rear spring. I can't remember what I put on it I would have to go to my shop and look. I was thinking I may need to add some rebound possibly to slow down this stiffer spring? Still too wet to ride here ... more »

Added reply in a thread Front end tuck 9/16/2020 8:37 AM

Thanks for all the replies guys! Haven't got a chance to ride and we are in the middle of hurricane Sally right now so this weekend is probably not going to happen either.

Added reply in a thread Front end tuck 9/6/2020 5:44 PM

I did that for awhile but eventually my axle was all the way back and chain was too loose. I will definitely try some of the changes you suggested and will report back. If I can't get it much better I will try and get a vid of it.

Started new thread Front end tuck 9/5/2020 2:43 PM

I have been struggling with front end tuck on my 2018 ktm 350sxf. Will too little sag cause this? I have been running 103 but recently moved the rear axle forward to run my 52 tooth rear sprocket. I know wheelbase might have an effect on it too. I like ... more »

This forum thread has 14 replies

Added reply in a thread Northern Florida Winter Training 9/5/2020 2:29 PM

Check out MX191 in Milton FL they ride on wed, sat, and sunday. Of course try to hit Monster Mountain on the way down or back. County line is also a good track though.

Added reply in a thread 250psi of compression in a CR250 8/8/2020 5:33 PM

Had a 06 RM250 stock head with a Wiseco racer elite piston in it. It would detonate on 93 pump but ran great on VP110!

Added reply in a thread Clutch holding tool 350sxf 6/1/2020 4:58 PM

Ive never messed with the lock down bolt before but have seen it on a video. Do you just get it at TDC and take the bolt out and the washer off and put it back in? Is the thickness of the washer the difference between the bolt locking it or still being ... more »

Added reply in a thread FX350- no oil top-end torched! 5/30/2020 10:29 AM

You check your oil pump gear yet? Curious because I just changed my gear. My stock one looks fine though. 2018 350sxf 27hrs.

Started new thread Clutch holding tool 350sxf 5/29/2020 8:38 PM

I have a 2018 350sxf and want to buy an ebc/rekluse style holder but can't seem to find one that fits my bike. I just finished the oil pump gear update on my bike and just would like one of these tools for the future as doing it without was a pain!

This forum thread has 9 replies

Added reply in a thread KTM Sxf 350 2019 Set up 10/25/2019 11:30 AM

I have an 18 but to start with I would simply set the sag(I like 103). All my clickers are stock but adding rebound to the rear will help if braking bumps are kicking the rear getting into corners.

Added reply in a thread KTM 350 front brake trouble. 9/11/2019 7:53 AM

No I have not tried to bleed it. I will double check the banjo bolts and try removing the master cylinder to get any air bubbles out. If that fails I will try to bleed it. Thanks guys!

Started new thread KTM 350 front brake trouble. 9/9/2019 5:29 PM

After about a week of sitting the front brake on my 350 seems to get some air trapped in it. I will get on the bike and the lever will pull all the way in to my fingers on the throttle. I can zip tie the lever to the bar and the next day it will be fine ... more »

This forum thread has 5 replies

Added reply in a thread Guy B, new Vital gear??? 7/13/2019 9:24 AM

Lol yeah pajama pants.

Added reply in a thread New Left over 450's 7/4/2019 7:35 AM

Thanks I was more asking for a buddy of mine. I also bought my ktm 350 from mountain motorsports(Roswell).

Added reply in a thread New Left over 450's 7/3/2019 6:22 PM

That's an awesome price, what dealer did you purchase from(GA)?

Added reply in a thread Who here weight trains pretty serious? 4/9/2019 5:08 PM

I do and I don't think it works well with mx! But I'm still trying to do both. The strength is great but I think it causes me to pump up too quick on the track.

Added reply in a thread Yamaha Fill-in 3/10/2019 7:56 AM

Josh Hill?

Added reply in a thread Is this the Vital 2T taliban dream bike? YZ 220 Retro 3/2/2019 9:06 AM

I'd like to see air-cooled kdx 200 engine in a kx250f chassis. I had a 86 air cooled kdx and it was a great bike.