Recent Activity
All
gregmx104 Added a reply to 6D Helmet Goggle Fitment
11/4/2023 1:53pm The goggles don't pinch without the helmet and fit fine with my old alpinestars helmet. It seems the forehead part of the helmet pushes the goggles down which then pinches my nose.
More »
mx317 Liked a reply to forum topic 6D Helmet Goggle Fitment
11/4/2023 1:42pm
6D and EKS brand goggles. I can also use the Oakley O-Frames, but not the pricey ones.
This forum topic has 35 replies.
El Capitan Liked a reply to forum topic 6D Helmet Goggle Fitment
11/3/2023 12:48am
This ☝️. 6D and Scott = ✅ 6D and 100% = no bueno …and I love the 100% with my Shoei evo.
This forum topic has 35 replies.
cwel11 Liked a reply to forum topic 6D Helmet Goggle Fitment
11/3/2023 12:48am
Using Scott prospects with no problems
This forum topic has 35 replies.
lumpy790 Liked a reply to forum topic 6D Helmet Goggle Fitment
11/3/2023 12:48am
I have had the same problem with Bell and had to find a smaller goggle to get rid of it. I bought a 6D but I think the problem is I have been buying to large of a helmet so it sits lower on my head so goggles are pushing down on my nose. I am going to buy a Medium liner to see if that fixes it.
This forum topic has 35 replies.
SonofThor32 Liked a reply to forum topic 6D Helmet Goggle Fitment
11/3/2023 12:48am
6D is definitely the most comfortable helmet I have ever owned. In fact, I literally have a new spare and visors because I like them so much. I had the same problem when wearing 100% goggles as well pushing down on my nose, and I need all of the help breathing as I can get so I had to switch. The problem I found, 100% (and some others) have a lot of rise to the goggle frame above the eyebrow area. So the top of the goggle ends up rubbing the helmet padding pushing down on your nose. I ended...
This forum topic has 35 replies.
gregmx104 Added a reply to 6D Helmet Goggle Fitment
11/3/2023 12:47am Cheers legends this helps a lot
gregmx104 Started a new thread 6D Helmet Goggle Fitment
11/2/2023 2:24am I've purchased a 6D helmet but i'm finding goggles are now pinching my nose. I have never had any trouble before with other helmets. The goggles i've tried are 100% Strata 2, Leatt 4.5, Leatt 6.5 and Fox main. Does anyone else have this trouble or recommend a set of goggles that fit properly in the helmet
This forum thread has 35 replies.
gregmx104 Added a reply to 2002 kx 125 swingarm
8/15/2021 4:19am Sounds like by changing the swingarm it wil open a can of worms. Would jb weld work on the dent to fill it out? Has anyone used it on a swingarm before and know if it bonds well and blends in. The dent is half way down the outside of the swingarm about an inch square but not too deep...
gregmx104 Added a reply to 2002 kx 125 swingarm
8/13/2021 4:24am Cheers for the reply. I didn't know about the same linkage design on the 2003 i might check it out
gregmx104 Started a new thread 2002 kx 125 swingarm
8/12/2021 8:42pm Ive got myself a 2002 kx 125 project bike to work on and i have found a fair size dent in the swing arm. Would anyone know if a swingarm from a newer kx 125 fit? The newer swingarms look a lot nicer than the old square style.
This forum thread has 6 replies.
gregmx104 Added a reply to 2013 kxf 250 Cam chain loose then tight
2/16/2016 5:40pm Thanks heaps. That will give me something to work on
gregmx104 Started a new thread 2013 kxf 250 Cam chain loose then tight
2/16/2016 5:40pm We went to adjust the valve clearances but when it all got put back together the cam chain was loose. Not completely loose but loose enough because the cam chain tensioner didnt take up all the slack. Ive tried a different spring in the tensioner but still the same result. So we manually set the tensioner to take up the...
This forum thread has 5 replies.
gregmx104 Added a reply to 2013 kxf 250 Cam chain loose then tight
2/16/2016 3:13pm Would a worn cam chain effect valve clearances? We only got 4 hours on the intake valves before the clearance completely closed up again. We shimmed it back to spec 4 hours ago and the exhaust clearances havent moved but the intake moved a lot.