Recent Activity
All
dannyboy123 Added a reply to 2019 KTM 450 SXF Bogging
11/4/2019 10:47pm After setting up the get ecu correctly the flameout are not as bad. Out on the track the bike never has any issues with flameouts and runs sweet.
More »
CarlinoJoeVideo Liked a reply to forum topic 2019 KTM 350 SXF Build (Tested)
5/27/2019 10:57pm
It’s been a while since I updated this. Almost done! Got some new WP suspension that I’ve been testing with Michael Lindsy. Going to film a build video in 2 weeks. 
This forum topic has 276 replies.
Derek Harris Liked a reply to forum topic 2016-2018 KTM 350 TPS setting
5/13/2019 12:22pm
I swear every consumer judges a bike by this metric and it's THE STUPIDEST TEST EVER. You are NEVER on the track at a dead idle and go WIDE open as hard as you can. The engine is NEVER at 2200 rpm while riding. The engine in general makes peak torque around 8500 and revs to 13500. To achieve this is has BIG cams and HUGE ports. Compared to a Nascar engine - which is TOTALLY not streetable for daily use - the 350 has BIGGER PORTS per it's size and a far larger cam per it's size If we...
This forum topic has 12 replies.
dannyboy123 Added a reply to 2019 KTM 450 SXF Bogging
4/26/2019 11:04pm Did you manage to get this issue resolved? My 19 sxf 250 is doing the same. Its only got 5 hours on it but it's done it since new. I have adjust the tps up to 0.58 which did help a little. I fitted a GET ECU hoping it would solve the problem but the flameout are loads worse than...
dannyboy123 Added a reply to 2019 KTM 350 SXF Build (Tested)
4/24/2019 11:19am I'm just going to get a longer cable made from venhill. Joe uses a Kawasaki kxf set up including throttle I think
dannyboy123 Added a reply to 2019 KTM 350 SXF Build (Tested)
4/23/2019 8:06pm Cheers Joe, they take a few weeks to order in that's all and I'm away working just now but will measure up when I get home.
dannyboy123 Added a reply to 2019 KTM 350 SXF Build (Tested)
4/23/2019 11:29am Hey Joe, do you know how much longer the kawi cable is to the std ktm one. I found a company that can make me a cable and add the length I need. Does yours route down the left or right side of the frame?
dannyboy123 Added a reply to 2019 KTM 350 SXF Build (Tested)
4/21/2019 7:54am I might just do that, cheers Joe
dannyboy123 Added a reply to 2019 KTM 350 SXF Build (Tested)
4/20/2019 12:01pm Cheers Joe, I just used some red caliper paint on mine in the end, I smoothed all of the weld lines off the rear caliper aswell before sending for 
cerakote. 
cerakote.
dannyboy123 Added a reply to GET ECU custom maps
4/17/2019 2:33pm Ohh really, why is that? I've had both and prefer the get but I guess that's mainly because I love the wifi, and launch control.
MadsDausel Liked a reply to forum topic GET ECU custom maps
4/17/2019 11:01am
HP race Development
This forum topic has 6 replies.
colvin227 Liked a reply to forum topic GET ECU custom maps
4/16/2019 12:30pm
Just contact Dan Truman directly. You can reach him through the PulpMX contact form. He’s an awesome guy and totally took care of me on my RMZ450.
This forum topic has 6 replies.
dannyboy123 Started a new thread GET ECU custom maps
4/16/2019 12:09pm Can anyone recommend someone that can supply custom maps for the GET ECUs? Bikes a 19 ktm sxf 250
This forum thread has 6 replies.
dannyboy123 Started a new thread Anybody got a GET ECU and the latest wiget app?
4/12/2019 12:41pm I've just bought a GET rx1 pro ECU with wifi and lcgpa for my 19 ktm sxf250. When I connect to the wiget app under profiles I am only showing one profile (dry). I'm sure I should have three there as per the demo. Also my tps reading does from 2% to 102% - is that right or should I...
This forum thread has 0 replies.
dannyboy123 Started a new thread 2019 ktm sxf brembo brake/clutch master cylinder cover bolts
4/10/2019 11:36am Does anyone know what size the clutch/front brake master cylinder cover bolts are. I need the overall length (top of bolt head to bottom of threads) and the thread size, I'm away from home for two weeks so cant check. Thanks in advance. My bikes a 19 but guess most years will have been the same.
This forum thread has 0 replies.
dannyboy123 Added a reply to 2019 sxf 250 shock movement
4/7/2019 1:34pm Yes, the top joint on the shock. Just seems to be moving more than I remember.
dannyboy123 Added a reply to 2018 FC350 fault code
4/7/2019 11:16am Hour meter isn't connected to the ECU, that's just the hour meter that maybe needs a battery or something
dannyboy123 Started a new thread 2019 sxf 250 shock movement
4/7/2019 7:48am Would anyone have a check of their 19 ktm sxf or 19 husky to see if the rear shock has movement side to side. If I grab the reservoir it moves quite a bit from left to right, nothing is missing and the bike only has 4 hours on.I didn't notice this before but it may have been like this...
This forum thread has 3 replies.
dannyboy123 Added a reply to How to get mobile view back?
4/7/2019 12:40am Tell me then please Haha
dannyboy123 Added a reply to 18' 450sxf TPS adjust???
4/6/2019 11:49pm After adjusting your tps to 0.62 did you still have the std ECU fitted? My 19 250f also came from the factory at 0.50 ish, I bumped it up to 0.62 (I've opened up the air box and fitted an fmf pipe) but it didn't run right on track, ended up at 0.58 which seems perfect but on the stand...