Recent Activity
All
Cory128 Added a reply to Supertech R bootie in Tech 10
12/7/2025 7:16pm I don't make them. I modify your existing booties.
More »
Cory128 Added a reply to Supertech R bootie in Tech 10
12/7/2025 5:57pm Absolutely I can hook you up. I have a pair now in progress and another just went out. I do them for 70 a pair.
Cory128 Added a reply to TECH-10 Factory Inner Modification
2/23/2025 6:56am
Cory128 Started a new thread TECH-10 Factory Inner Modification
2/23/2025 6:54am I have seen a few posts where guys are asking where to get factory style lace up booties for Tech-10's. I have no clue where to get them but I wanted to reach out and say I can modify yours to be close to what your looking for. For $50 a pair I can modify your existing stock Inner bootie...
This forum thread has 1 reply.
Cory128 Added a reply to 23 KTM 250 SXF Compression Test
1/6/2025 11:32am The 23's 250's are notorious for catching a ring. I have seen it more than once now. Fortunately most just need a piston and ring and everything is good to go after that.
Cory128 Added a reply to Supertech R bootie in Tech 10
11/18/2024 10:14am The biggest tool needed is an eyelet setting tool. You need a professional unit to get into some of the areas in the boot. I don't recommend a hand set tool. You also need eyelets and a sewing machine. Tools most people wouldn't invest in.
Cory128 Added a reply to Supertech R bootie in Tech 10
11/18/2024 9:54am No. No pinch point. Plus there are a few different styles of closures. The laces are elastic and really do a good job of holding in place without much effort in a mechanism
Cory128 Added a reply to Supertech R bootie in Tech 10
11/18/2024 5:25am
Cory128 Added a reply to Supertech R bootie in Tech 10
11/18/2024 4:05am You can make a Tech-10 bootie into a similar bootie as the SuperTech. It takes a few tools to do it clean but the results are way better once done. I have modified a few already and everyone loves the feel. I add a thicker insole also which really helps tighten the toe box area too. Overall you get a...
mumbles Liked a reply to forum topic Abandoned or forgotten tracks
11/4/2024 4:25pm
I never raced Carlsbad but drove out from Phoenix to see the 500GP in 79 and 80. So I got to witness Marty Moates winning the 500Gp in 80. That was the changing of the guard when the US started to take over MX. One of the best race weekends of my life. Here Marty is getting the holeshot.
This forum topic has 265 replies.
Cory128 Added a reply to Alpinestar Tech 10 modifications
10/3/2024 10:51am PM me. I might be able to help. I make custom Orthotics for a living and have made multiple sets of custom and semi custom modified booties for Tech 10's.
Cory128 Added a reply to Alpinestar Tech 10 modifications
10/3/2024 10:14am The nice thing about the Tech 10's is the inner boot. You can modify, or replace the boot with a custom one also. Depending on what your looking to achieve it gives you way more options than a non bootie boot.
Cory128 Added a reply to Ktm sxf 350 fi light code flashing.
8/5/2024 8:10am No it's really easy. Clean the connection and just wipe it down. It should clear up. Plus at least it doesn't effect the way the bike preforms with a bad sensor. It doesn't seem to effect anything even if it reading as an error.
Cory128 Added a reply to Ktm sxf 350 fi light code flashing.
8/5/2024 3:29am That to me is a pretty common problem with KTM's in general. Being its in the air box it gets dirty and clogged, and on the older gen model it would get ripped out when pulling the airbox. You should be good in just cleaning it. Pull the right side shroud and it's easily accessible. Take it apart and clean...
Cory128 Added a reply to 23+ 350 gearing
8/5/2024 3:22am I actually did the opposite. I felt like every track I was in 3rd and 4th gear only. 2nd gear was way too short and half way through corners I would need to shift however if i tried to use 3rd to enter it didn't have enough grunt to roll through the corner without the use of the clutch. I...
Cory128 Added a reply to 2023 KTM Wiring Harness Failure
7/2/2024 7:35am I am not sure many are aware either but Ktm also has a update for the 23 models. It has to be done by the dealer as it needs to be hooked up to the computer. Maybe try having the update and see if that fixes anything? The update seemed to clean mine up a little. Not sure what it...
Factor E Liked a reply to forum topic Front brake bleeding help desperately needed
6/27/2024 4:39am
If you have some pressure pull lever in and crack top banjo first to bleed then do bottom then go back to bleeder couple times
This forum topic has 36 replies.
Cory128 Added a reply to Plantar Fasciitis
6/26/2024 4:17pm I actually make custom Orthotics for a living. Foot pain is a major issue for a large majority of us actually. Way more than you think. There is no reason why it can't be addressed for moto also. Just because we wear boots doesn't mean we can't also use better insoles or even custom insoles to help. I always recommend...
Cory128 Added a reply to 2023 KTM Wiring Harness Failure
6/10/2024 4:21pm I have many issues with my 23 concerning starting. I have replaced relays, new fuses and still at random it would decide not to start. The trick is to look at the map switch. If you hit the start button and your switch or hour meter wont light up your system has a "fault" some where and the ECU has...
Cory128 Added a reply to Laces for Alpinestars tech 10
10/9/2023 4:48am I have made a few of these type of modifications to Tech 10's before for a few riders. I agree the Tech 10 boot has a loose fit for most people and to help that we not only add the laces but we also add a proper insole inside the boot to tighten the toe box area up. Everyone loves...