Labor rate for replacing a 125 crank, What is it ? Thanks thanks

profeshenal125

What is the average cost now in 2023 ? Thanks

2
6
|
Deadric
Profile picture for user Deadric
Posts
394
Joined
11/2/2020
Location
Walden, CO, USA
Deadric 9/6/2023 9:40am
9/6/2023 9:40am

I can only comment on the shop rates here but I have three places close that could do it. Rates are $100, $125, and $150 per hour plus parts. 

1
profeshenal125 9/6/2023 9:46am
9/6/2023 9:46am

Approximately 3 hrs of labor ? Thx  I dropped it off in April it was freezing rain& ice pellets. It’s done now. 

2
motomind132
Profile picture for user motomind132
Posts
281
Joined
5/12/2023
Location
Chicago, IL, USA
motomind132 9/6/2023 9:46am
9/6/2023 9:46am

Check crank works 

1
motomind132
Profile picture for user motomind132
Posts
281
Joined
5/12/2023
Location
Chicago, IL, USA
motomind132 9/6/2023 9:50am
9/6/2023 9:50am

Crank if it's in good shape take an hour to rebuild 1.5 hrs max if everything is good and builder is slow

1
2

The Shop

See All »
cbarber
Profile picture for user cbarber
Posts
239
Joined
6/6/2014
Location
Atwater, MN, USA
cbarber 9/6/2023 9:56am
9/6/2023 9:56am
motomind132 wrote:

Crank if it's in good shape take an hour to rebuild 1.5 hrs max if everything is good and builder is slow

but what if it's a double boost port?

9
MxAddic
Profile picture for user MxAddic
Posts
5308
Joined
11/24/2022
Location
USA
MxAddic 9/6/2023 10:11am
9/6/2023 10:11am
motomind132 wrote:

Crank if it's in good shape take an hour to rebuild 1.5 hrs max if everything is good and builder is slow

Why should you pay more because they guy is slow?

Come on now we are talking profeshenal125 here. I am sure it has to be lightened, blueprinted, balanced and polished.

8
lumpy790
Profile picture for user lumpy790
Posts
11623
Joined
9/18/2007
Location
York, SC, USA
lumpy790 9/6/2023 11:40am
9/6/2023 11:40am

There are literally thousands that can do it so how would you go about collecting this data?

Lots of variables too.

New crank?

Just crank?

whole motor?

Pressing/ Rebuilding old crank?

motor in the frame?

Motor out of frame?

is it your neighbor or your friend?

11
1
Flesh206
Profile picture for user Flesh206
Posts
302
Joined
4/30/2010
Location
Perrys, OH, USA
Flesh206 9/6/2023 11:50am
9/6/2023 11:50am

More than you think. 

2
Magoofan
Profile picture for user Magoofan
Posts
10401
Joined
5/4/2021
Location
Shadow Glen (for those who remember), CA, USA
Magoofan 9/6/2023 11:53am
9/6/2023 11:53am

About tree-fiddy....

14
1
stremme12
Profile picture for user stremme12
Posts
1220
Joined
3/10/2015
Location
HA, HI, USA
stremme12 9/6/2023 12:03pm
9/6/2023 12:03pm

Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a person to take over my position for replacement. 

13
yak651
Profile picture for user yak651
Posts
8833
Joined
8/26/2006
Location
Appleton, WI, USA
Fantasy
1358th
yak651 9/6/2023 1:20pm
9/6/2023 1:20pm

Varner available?

10
Iridereallyslow 9/6/2023 1:30pm
9/6/2023 1:30pm
stremme12 wrote:
Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a...

Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a person to take over my position for replacement. 

This was this type of post I was expecting when I clicked on this thread knowing profeshenal125 was the OP

7
burn1986
Profile picture for user burn1986
Posts
12246
Joined
4/16/2010
Location
bossier city, LA, USA
burn1986 9/6/2023 1:51pm
9/6/2023 1:51pm

Wow, I was gonna say about $60/ hr. It’s been awhile I guess.

REIDY-171 9/6/2023 2:31pm
9/6/2023 2:31pm

Just for refrence I work at a dealer in SoCal that carries Yamaha. Flat rate time straight from Yamaha's dealer portal says 5 hours to remove and replace a crank. Labor rate here is $150 an hour. 

15
RightHookNoCandy 9/6/2023 2:47pm
9/6/2023 2:47pm
stremme12 wrote:
Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a...

Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a person to take over my position for replacement. 

woudnt no how much crank is to fix. put 50 000 hours on are 2 strokes and never had problem since that one in 1999 (bad ring gap from factor . thatw why we go 2 storke, win ever pro am on east coast with them dont need fancy valve. plus its 95 degrees in delaware today. 

16
3
stremme12
Profile picture for user stremme12
Posts
1220
Joined
3/10/2015
Location
HA, HI, USA
stremme12 9/6/2023 2:51pm
9/6/2023 2:51pm
stremme12 wrote:
Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a...

Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a person to take over my position for replacement. 

RightHookNoCandy wrote:
woudnt no how much crank is to fix. put 50 000 hours on are 2 strokes and never had problem since that one in 1999 (bad...

woudnt no how much crank is to fix. put 50 000 hours on are 2 strokes and never had problem since that one in 1999 (bad ring gap from factor . thatw why we go 2 storke, win ever pro am on east coast with them dont need fancy valve. plus its 95 degrees in delaware today. 

Pro ams are faster than pros anyway. 

profeshenal125 9/6/2023 3:46pm
9/6/2023 3:46pm
lumpy790 wrote:
There are literally thousands that can do it so how would you go about collecting this data? Lots of variables too. New crank? Just crank? whole...

There are literally thousands that can do it so how would you go about collecting this data?

Lots of variables too.

New crank?

Just crank?

whole motor?

Pressing/ Rebuilding old crank?

motor in the frame?

Motor out of frame?

is it your neighbor or your friend?

image 45New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks. Not sure if the vapor blasting or the muggy weather rusted the bearings.  I hv a new crank in it now. And hv a spare crank now. The bike is a 05 cr125 non DBP. Haha I,m selling the 05.  2 dr apt 1 dr said my wrist might be fractured in 2 areas. It’s difficult to type with the large brace. I still went riding twice. Rub prescription cream on the wrist & tape it up good. It’s been throbbing since 8-6. My wrist was fine riding all the other injuries not good like shoulder to wrist ligaments, etc. The track is real slippery hard pack in most areas.  In a hurry to get my speed up on my 1st ride it went ok. Sunday the track closes at 1pm so I,m in a hurry. The track is slippery I want to pu the aggression. On a up hill with a sweeping left . I went to arc off the rt side bank & the front end & bike kept pushing into the deep silt bank. I held it wo dragging the left bar. I landed on the rt side of the bike. The front end faced down the hill when it came to a stop. Really weird crash.   My groin muscle hurt instantly. A lot of icing since Sunday. And rub that strong prescription cream on & hit the sauna shower then a cold pool then cream again , repeat. The crotch area is the worst . Pic doesn’t show it but it’s yellowish in the crotch area. 

10
1
INeedaNewUsername 9/6/2023 4:09pm
9/6/2023 4:09pm
lumpy790 wrote:
There are literally thousands that can do it so how would you go about collecting this data? Lots of variables too. New crank? Just crank? whole...

There are literally thousands that can do it so how would you go about collecting this data?

Lots of variables too.

New crank?

Just crank?

whole motor?

Pressing/ Rebuilding old crank?

motor in the frame?

Motor out of frame?

is it your neighbor or your friend?

profeshenal125 wrote:
New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks...

image 45New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks. Not sure if the vapor blasting or the muggy weather rusted the bearings.  I hv a new crank in it now. And hv a spare crank now. The bike is a 05 cr125 non DBP. Haha I,m selling the 05.  2 dr apt 1 dr said my wrist might be fractured in 2 areas. It’s difficult to type with the large brace. I still went riding twice. Rub prescription cream on the wrist & tape it up good. It’s been throbbing since 8-6. My wrist was fine riding all the other injuries not good like shoulder to wrist ligaments, etc. The track is real slippery hard pack in most areas.  In a hurry to get my speed up on my 1st ride it went ok. Sunday the track closes at 1pm so I,m in a hurry. The track is slippery I want to pu the aggression. On a up hill with a sweeping left . I went to arc off the rt side bank & the front end & bike kept pushing into the deep silt bank. I held it wo dragging the left bar. I landed on the rt side of the bike. The front end faced down the hill when it came to a stop. Really weird crash.   My groin muscle hurt instantly. A lot of icing since Sunday. And rub that strong prescription cream on & hit the sauna shower then a cold pool then cream again , repeat. The crotch area is the worst . Pic doesn’t show it but it’s yellowish in the crotch area. 

Get a lot lizard for a reset. Worried about ya Supertrucker, don't want you to end up wearing flip-flops and not swinging that trailer wide enough.

6
1

Pit Row

See All »
Brad460
Profile picture for user Brad460
Posts
4496
Joined
5/15/2012
Location
Richfield, WI, USA
Fantasy
260th
Brad460 9/6/2023 5:25pm
9/6/2023 5:25pm
Deadric wrote:
I can only comment on the shop rates here but I have three places close that could do it. Rates are $100, $125, and $150 per...

I can only comment on the shop rates here but I have three places close that could do it. Rates are $100, $125, and $150 per hour plus parts. 

Walden..out there for work a few times a year..

Dirt bikes everywhere 

5025BC22-B25A-42A6-980A-91EAD0600B4B.jpeg?VersionId=c8T5EDokvtsA4

1
JustMX
Profile picture for user JustMX
Posts
5292
Joined
4/1/2008
Location
USA
JustMX 9/6/2023 6:00pm
9/6/2023 6:00pm Edited Date/Time 9/6/2023 6:08pm
stremme12 wrote:
Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a...

Crankshaft replacement sounds expensive. I drove to work today and filled up my truck with gas. Had shredded chicken with peppers for lunch. Inquired about a person to take over my position for replacement. 

Were the ladies at the diner making shredded chicken and peppers topless and/or practicing on a stripper pole when they went on break?

If not, sir, you have exposed yourself as  lame imposter.....

And I think the guy posting as pro125 is an imposter as well.

The REAL pro125 would have proof of his yellow groin and pics of a chick at the massage parlor rubbing it out.

 

2
1
kott0n
Profile picture for user kott0n
Posts
673
Joined
10/4/2016
Location
Vancouver, WA, USA
kott0n 9/6/2023 6:10pm
9/6/2023 6:10pm

Is this all a troll a post? I'm so confused 

1
MxAddic
Profile picture for user MxAddic
Posts
5308
Joined
11/24/2022
Location
USA
MxAddic 9/6/2023 6:51pm
9/6/2023 6:51pm
profeshenal125 wrote:
New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks...

image 45New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks. Not sure if the vapor blasting or the muggy weather rusted the bearings.  I hv a new crank in it now. And hv a spare crank now. The bike is a 05 cr125 non DBP. Haha I,m selling the 05.  2 dr apt 1 dr said my wrist might be fractured in 2 areas. It’s difficult to type with the large brace. I still went riding twice. Rub prescription cream on the wrist & tape it up good. It’s been throbbing since 8-6. My wrist was fine riding all the other injuries not good like shoulder to wrist ligaments, etc. The track is real slippery hard pack in most areas.  In a hurry to get my speed up on my 1st ride it went ok. Sunday the track closes at 1pm so I,m in a hurry. The track is slippery I want to pu the aggression. On a up hill with a sweeping left . I went to arc off the rt side bank & the front end & bike kept pushing into the deep silt bank. I held it wo dragging the left bar. I landed on the rt side of the bike. The front end faced down the hill when it came to a stop. Really weird crash.   My groin muscle hurt instantly. A lot of icing since Sunday. And rub that strong prescription cream on & hit the sauna shower then a cold pool then cream again , repeat. The crotch area is the worst . Pic doesn’t show it but it’s yellowish in the crotch area. 

Looks like your groin went to Des Moines. Never let the blast media get in the bearings Bro. Game over.

1
INeedaNewUsername 9/6/2023 6:57pm
9/6/2023 6:57pm
profeshenal125 wrote:
New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks...

image 45New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks. Not sure if the vapor blasting or the muggy weather rusted the bearings.  I hv a new crank in it now. And hv a spare crank now. The bike is a 05 cr125 non DBP. Haha I,m selling the 05.  2 dr apt 1 dr said my wrist might be fractured in 2 areas. It’s difficult to type with the large brace. I still went riding twice. Rub prescription cream on the wrist & tape it up good. It’s been throbbing since 8-6. My wrist was fine riding all the other injuries not good like shoulder to wrist ligaments, etc. The track is real slippery hard pack in most areas.  In a hurry to get my speed up on my 1st ride it went ok. Sunday the track closes at 1pm so I,m in a hurry. The track is slippery I want to pu the aggression. On a up hill with a sweeping left . I went to arc off the rt side bank & the front end & bike kept pushing into the deep silt bank. I held it wo dragging the left bar. I landed on the rt side of the bike. The front end faced down the hill when it came to a stop. Really weird crash.   My groin muscle hurt instantly. A lot of icing since Sunday. And rub that strong prescription cream on & hit the sauna shower then a cold pool then cream again , repeat. The crotch area is the worst . Pic doesn’t show it but it’s yellowish in the crotch area. 

MxAddic wrote:

Looks like your groin went to Des Moines. Never let the blast media get in the bearings Bro. Game over.

For a Pro, that sure was an Am move wasn't it?

1
burn1986
Profile picture for user burn1986
Posts
12246
Joined
4/16/2010
Location
bossier city, LA, USA
burn1986 9/6/2023 6:59pm
9/6/2023 6:59pm
profeshenal125 wrote:
New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks...

image 45New crank, engine in bike. The main bearings where rusty- grindy. I had the engine vapor blasted. Then it sat in a box for 4 weeks. Not sure if the vapor blasting or the muggy weather rusted the bearings.  I hv a new crank in it now. And hv a spare crank now. The bike is a 05 cr125 non DBP. Haha I,m selling the 05.  2 dr apt 1 dr said my wrist might be fractured in 2 areas. It’s difficult to type with the large brace. I still went riding twice. Rub prescription cream on the wrist & tape it up good. It’s been throbbing since 8-6. My wrist was fine riding all the other injuries not good like shoulder to wrist ligaments, etc. The track is real slippery hard pack in most areas.  In a hurry to get my speed up on my 1st ride it went ok. Sunday the track closes at 1pm so I,m in a hurry. The track is slippery I want to pu the aggression. On a up hill with a sweeping left . I went to arc off the rt side bank & the front end & bike kept pushing into the deep silt bank. I held it wo dragging the left bar. I landed on the rt side of the bike. The front end faced down the hill when it came to a stop. Really weird crash.   My groin muscle hurt instantly. A lot of icing since Sunday. And rub that strong prescription cream on & hit the sauna shower then a cold pool then cream again , repeat. The crotch area is the worst . Pic doesn’t show it but it’s yellowish in the crotch area. 

Dayummm nasty l’il crash. Voltarin works fairly good too.

lumpy790
Profile picture for user lumpy790
Posts
11623
Joined
9/18/2007
Location
York, SC, USA
lumpy790 9/6/2023 7:40pm
9/6/2023 7:40pm

My massage therapist has a similar approach 

IMG 3230

1
1
Rawly
Profile picture for user Rawly
Posts
899
Joined
9/12/2019
Location
Simi Valley, CA, USA
Rawly 9/6/2023 8:13pm
9/6/2023 8:13pm

The real Pro would have his chick and her mom taking care of the groin injury. Who is this ?    
  Glad to see you riding again. Take care of that busted up body of yours. 

1
1
soresammy
Profile picture for user soresammy
Posts
228
Joined
1/23/2022
Location
Red Hook, NY, USA
soresammy 9/6/2023 9:48pm
9/6/2023 9:48pm
Deadric wrote:
I can only comment on the shop rates here but I have three places close that could do it. Rates are $100, $125, and $150 per...

I can only comment on the shop rates here but I have three places close that could do it. Rates are $100, $125, and $150 per hour plus parts. 

Brad460 wrote:
Walden..out there for work a few times a year.. Dirt bikes everywhere 

Walden..out there for work a few times a year..

Dirt bikes everywhere 

5025BC22-B25A-42A6-980A-91EAD0600B4B.jpeg?VersionId=c8T5EDokvtsA4

Walden NY? 

zehn
Profile picture for user zehn
Posts
7891
Joined
1/15/2013
Location
Anchorage, AK, USA
zehn 9/6/2023 10:51pm
9/6/2023 10:51pm

piss jugs

2

Post a reply to: Labor rate for replacing a 125 crank, What is it ? Thanks thanks