KTM Husky 250 / 350 7075 Aluminum Oil Pump Gears

Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
Bruce372 5/14/2021 2:24pm
5/14/2021 2:24pm
Years ago, many rmz450s ruined engines because they ran a plastic T coupler inbetween fhe radiator hoses and it melted and the coolant clogged, the bike over heated and then died.

They sold that T hose on bikes for years
ebergeber
Profile picture for user ebergeber
Posts
18
Joined
2/4/2019
Location
Eagle Mountain, UT, USA
ebergeber 5/15/2021 8:32am
5/15/2021 8:32am
Rawly wrote:
Any of you guys get these gears ? Looking for feedback , but this thread has been eerily silent.
I ended up grabbing a set of these for my 21 350 XCF and installing them wasn't too bad. I had a 2017 KTM 350 SXF a few years ago that I never had issues (sold at 105 hours), and have many friends that ride the 250 and 350 bikes that did not or have not had the failures with many hours of abuse. One friend wasn't so lucky and his failed with under hours. The weird part is his bike wasn't ridden and abused like the others mentioned first. I figured the little price to pay up front for peace of mind was better than wondering if my gears were going to be one of those that did end up failing and costing me much more in the long run. Only a short ride time on them so far so I don't have much input other than TrOy got them sent to me quickly. Thumbs up to a great Vital MXer
3
Ryan625
Profile picture for user Ryan625
Posts
1689
Joined
9/14/2019
Location
Lynnwood, WA, USA
Ryan625 2/28/2022 6:41pm
2/28/2022 6:41pm
Hey are you still making these? I was wondering if that smaller gear was still plastic on the 2022's, I bought thew Nihilo billet gear but have seen nothing about the smaller one and have yet to open up the motor for the install.

I might be interested in buying one if so!
braaap_man
Profile picture for user braaap_man
Posts
172
Joined
3/19/2018
Location
Valley Center, CA, USA
braaap_man 2/28/2022 8:34pm
2/28/2022 8:34pm
Ryan625 wrote:
Hey are you still making these? I was wondering if that smaller gear was still plastic on the 2022's, I bought thew Nihilo billet gear but...
Hey are you still making these? I was wondering if that smaller gear was still plastic on the 2022's, I bought thew Nihilo billet gear but have seen nothing about the smaller one and have yet to open up the motor for the install.

I might be interested in buying one if so!
Sent him a message last year and the last thing he sent me was that he was on the beach in San Felipe…🤷🏽‍♀️😂
1

The Shop

See All »
DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 3/2/2022 6:48pm
3/2/2022 6:48pm
Motormedic sells them. I bought a set from him.
Gears
Greenbush
Profile picture for user Greenbush
Posts
106
Joined
4/28/2015
Location
Saint Johns, MI, USA
Greenbush 3/3/2022 11:07am
3/3/2022 11:07am
Tacomoto sells both also
1
Ryan625
Profile picture for user Ryan625
Posts
1689
Joined
9/14/2019
Location
Lynnwood, WA, USA
Ryan625 3/3/2022 11:37am
3/3/2022 11:37am
Thank you!
tr0y
Profile picture for user tr0y
Posts
28
Joined
8/15/2019
Location
Pahrump, NV, USA
tr0y 3/3/2022 11:40am
3/3/2022 11:40am
Greenbush wrote:
Tacomoto sells both also
We make the gears that Taco Moto Sells... Smile
tr0y
Profile picture for user tr0y
Posts
28
Joined
8/15/2019
Location
Pahrump, NV, USA
tr0y 3/3/2022 11:40am
3/3/2022 11:40am
DB97 wrote:
Motormedic sells them. I bought a set from him.
Gears
Those are the same I / we sell Smile
1
tr0y
Profile picture for user tr0y
Posts
28
Joined
8/15/2019
Location
Pahrump, NV, USA
tr0y 3/3/2022 11:43am
3/3/2022 11:43am
Hey sorry all .. I got stuck in Baja ( oh darn ) for quite a while longer than I expected.

Gears are here, working and still for sale

1
sandman768
Profile picture for user sandman768
Posts
8113
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 4/9/2022 9:15am
4/9/2022 9:15am
Hey Guys, resurrecting this thread. 2021 ktm 350sfx 120hrs, top end just freshend up at 110hrs. Noticed my last oil change I have some black plastic bits in my oil, pulled clutch assy out to inspect the 2 plastic gears, they look perfect. No bits in clutch cavity. So possible the other plastic oil pump gear on the left side of engine, just below the shifter? I want to inspect it, can the gear be removed without splitting the cases? Thanks….
tr0y
Profile picture for user tr0y
Posts
28
Joined
8/15/2019
Location
Pahrump, NV, USA
tr0y 4/9/2022 9:26am
4/9/2022 9:26am
hey @sandman768 so the plastic gears look great till they don't. It is a very sudden failure when they go.

To see them they are under the clutch basket. If you have questions please PM or post here... I do watch this thread.

Troy
sandman768
Profile picture for user sandman768
Posts
8113
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 4/9/2022 12:35pm
4/9/2022 12:35pm
I found the problem… the shop that did the top end left a locating pin from somewhere in the engine! It ended up breaking the inner oil pump rotor on the inside left side case! I pulled the valve cover, appears to be oil in the top end still, cam lobes look good but I”m not a 4T guy so, not sure what to do next….looks like cam journals have to be inspected?
wrc777
Profile picture for user wrc777
Posts
3203
Joined
5/21/2020
Location
Greenwood, IN, USA
Fantasy
124th
wrc777 4/9/2022 12:47pm
4/9/2022 12:47pm
I would at least pull the cam cap and see how those bearing surfaces look. Make sure you re torque it correctly. From personal experience the cam goes down first if there isn’t enough oil flow.
1
12main12
Profile picture for user 12main12
Posts
3
Joined
8/4/2020
Location
GB
12main12 10/31/2022 7:35am
10/31/2022 7:35am
tr0y wrote:
Hey sorry all .. I got stuck in Baja ( oh darn ) for quite a while longer than I expected. Gears are here, working and...
Hey sorry all .. I got stuck in Baja ( oh darn ) for quite a while longer than I expected.

Gears are here, working and still for sale

How do we get in contact with you?

Pit Row

See All »

Post a reply to: KTM Husky 250 / 350 7075 Aluminum Oil Pump Gears