Lets see your 16+ KTMs!

HenryA
Profile picture for user HenryA
Posts
3784
Joined
12/29/2011
Location
Stockholm, SE
HenryA 1/26/2019 3:19pm
1/26/2019 3:19pm
Love the pics, you all got some beautiful bikes.
Teamoatmealpie 1/26/2019 3:48pm
1/26/2019 3:48pm
Jeremy_Preston wrote:
[img]https://p.vitalmx.com/photos/forums/2019/01/26/320821/s1200_20190126_144058.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2019/01/26/320822/s1200_20190126_144121.jpg[/img]


Sharp looking bike- very nice!!! 300 or 250?
Jeremy_Preston 1/26/2019 4:39pm
1/26/2019 4:39pm
Jeremy_Preston wrote:
[img]https://p.vitalmx.com/photos/forums/2019/01/26/320821/s1200_20190126_144058.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2019/01/26/320822/s1200_20190126_144121.jpg[/img]


Teamoatmealpie wrote:
Sharp looking bike- very nice!!! 300 or 250?
300. I just pulled the cylinder and installed 1.25mm worth of base gaskets and had rkt make a custom head for it to work with the raised cylinder. Also installed sx cdi. I love the bike and it runs amazing even with the mikuni carb.
Justin314
Profile picture for user Justin314
Posts
634
Joined
2/17/2009
Location
Suffolk, VA, USA
Justin314 1/26/2019 4:58pm
1/26/2019 4:58pm

The Shop

See All »
Hrzk75
Profile picture for user Hrzk75
Posts
318
Joined
1/8/2019
Location
SE
Hrzk75 1/27/2019 6:19am
1/27/2019 6:19am


my KTM SX 250 2017
a Pro circuit works pipe with R-304 shorty is now on the bike aswell, the sound is too good!
1
lumpy790
Profile picture for user lumpy790
Posts
11522
Joined
9/18/2007
Location
York, SC, USA
lumpy790 1/27/2019 8:05am
1/27/2019 8:05am
My 2015.5 FE became the 2016 production bike.


1
NeKawBoy
Profile picture for user NeKawBoy
Posts
237
Joined
4/1/2008
Location
La Vista, NE, USA
NeKawBoy 1/27/2019 12:29pm
1/27/2019 12:29pm


I still have a few things to add but, it's coming along nicely. I'm looking forward to spring so i can try it out.
2019 KTM 250 XC-W TPI
Dubya built wheels with Talon hubs and DID rims
X-Trig Rocs triple clamp
FMF Factory Fatty with Turbine Core 2.1 Spark arrestor (I exclusively ride in timber)
Cycra plastics
Factory Effex graphics
Dunlop MX 33 tires
Bridgestone Ultra Heavy Duty tubes
Cycra hand guards
Pro Taper Evo bars (woods hi)
Pro Taper chain and sprockets
Enduro Engineering soft seat
Enduro Engineering radiator braces and guards
GET ECU with injector relocation kit
TM Design Works slide n glide kit
TM Design Works rear disc guard
Enduro Engineering skid plate
Race Tech springs for a tubby old woods rider
Galfer rotors
Pro Taper foot pegs
Shock Sox fork protectors
Motion Pro Revolver Throttle
2
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY, USA
4csHATER 1/27/2019 4:01pm
1/27/2019 4:01pm
NeKawBoy wrote:
[img]https://p.vitalmx.com/photos/forums/2019/01/27/321075/s1200_2019_KTM_250_XC_W.jpg[/img] I still have a few things to add but, it's coming along nicely. I'm looking forward to spring so i can try it out. 2019...


I still have a few things to add but, it's coming along nicely. I'm looking forward to spring so i can try it out.
2019 KTM 250 XC-W TPI
Dubya built wheels with Talon hubs and DID rims
X-Trig Rocs triple clamp
FMF Factory Fatty with Turbine Core 2.1 Spark arrestor (I exclusively ride in timber)
Cycra plastics
Factory Effex graphics
Dunlop MX 33 tires
Bridgestone Ultra Heavy Duty tubes
Cycra hand guards
Pro Taper Evo bars (woods hi)
Pro Taper chain and sprockets
Enduro Engineering soft seat
Enduro Engineering radiator braces and guards
GET ECU with injector relocation kit
TM Design Works slide n glide kit
TM Design Works rear disc guard
Enduro Engineering skid plate
Race Tech springs for a tubby old woods rider
Galfer rotors
Pro Taper foot pegs
Shock Sox fork protectors
Motion Pro Revolver Throttle
not to sidetrack the origin post, i have seen several issues with the tpi bikes, is there reasoning behind the issues, what causes it all, and are you nervous about yours, is there certain things you have to take precaution of when washing or riding the bike in order for it to perform?
need2ride
Profile picture for user need2ride
Posts
835
Joined
10/29/2016
Location
the scene, CA, USA
need2ride 1/27/2019 6:05pm
1/27/2019 6:05pm

NeKawBoy
Profile picture for user NeKawBoy
Posts
237
Joined
4/1/2008
Location
La Vista, NE, USA
NeKawBoy 1/28/2019 9:53am
1/28/2019 9:53am
4csHATER wrote:
not to sidetrack the origin post, i have seen several issues with the tpi bikes, is there reasoning behind the issues, what causes it all, and...
not to sidetrack the origin post, i have seen several issues with the tpi bikes, is there reasoning behind the issues, what causes it all, and are you nervous about yours, is there certain things you have to take precaution of when washing or riding the bike in order for it to perform?
This is my first fuel injected bike. I waited until the second model year because I was a little leery as well.

About all the riding I've done was in the parking lot to break it in a little bit before changing out the ECU and installing a GET relocation kit for the injectors.

Time will tell but, fuel injection has been around for a while now...i don't see any issues with this that I wouldn't expect on a 4 stroke model as well.

As far as precautions...outside of making sure to use a little dialectic lube in the electrical connections & not spraying any soaps or solvents on the electrical components when I power wash it I'll treat it the same way as my 2013 XC.

I purpose built this bike for a private riding park that I ride at 99% of the time. I'll still keep my XC for riding in more extreme terrain such as Chadwick and Coloradao for a couple years because that's what I set it up for at the end of last summer.

KTM has been testing this technology for a long time before they released it. I'm confident it will work as well as any of the other fuel injected dirt bikes. If not, I'll go back to a carbureted model.
Moto_Geek
Profile picture for user Moto_Geek
Posts
1826
Joined
6/26/2007
Location
Golden, CO, USA
Moto_Geek 1/28/2019 10:07am
1/28/2019 10:07am
BR8ES
Profile picture for user BR8ES
Posts
1909
Joined
6/3/2018
Location
Bennett, CO, USA
BR8ES 1/28/2019 10:09am
1/28/2019 10:09am
Moto_Geek wrote:
[img]https://cdn-motocross.transworld.net/blogs.dir/441/files/2018/09/ei9r9006-1280x853.jpg[/img]
hard parts accessory?
1
madmaxperformance 1/29/2019 12:21pm
1/29/2019 12:21pm
My unridden 2017 SXF 350. Literally.... unridden. Hope to change that this summer. Even bought a Motovan.
dtl210
Profile picture for user dtl210
Posts
147
Joined
8/12/2018
Location
Post Falls, ID, USA
dtl210 1/30/2019 7:20am
1/30/2019 7:20am
A little bit of a different look to mine.


ra450
Profile picture for user ra450
Posts
24
Joined
3/14/2017
Location
Columbia, SC, USA
ra450 1/30/2019 7:03pm
1/30/2019 7:03pm

2
ra450
Profile picture for user ra450
Posts
24
Joined
3/14/2017
Location
Columbia, SC, USA
ra450 1/30/2019 7:08pm
1/30/2019 7:08pm

1

Pit Row

See All »
G-man
Profile picture for user G-man
Posts
9148
Joined
4/1/2008
Location
Mesa, AZ, USA
G-man 1/30/2019 7:26pm
1/30/2019 7:26pm
Nothing like being able to wheelie down the block on the way to pick up more beer! Woohoo


Post a reply to: Lets see your 16+ KTMs!