Best foot pegs? Fly Gator wide?

RickA
Profile picture for user RickA
Posts
244
Joined
12/10/2016
Location
Duluth, MN, USA
RickA
Edited Date/Time 5/18/2018 5:15am

I just ordered up some Fly Gator wide pegs for the KTM350sxf. Wondering if anyone has any reviews or what pegs they prefer otherwise?

I bought Fly because for one the price is right, and I like Jason's Thomas and what he stands for. Therefore I support everyone in the industry that I feel supports me, or aligns with my opinions.

So I'm just curious what kind of peg everyone likes and why.. I can't justify 350$ Raptors
|
Panic_Rev
Profile picture for user Panic_Rev
Posts
686
Joined
7/13/2012
Location
Fayetteville, AR, USA
Panic_Rev 1/20/2017 7:30pm
1/20/2017 7:30pm
I have raptors and they are sweet.
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD, USA
mxb2 1/20/2017 7:46pm
1/20/2017 7:46pm
Raptor pegs on my bikes,. Also check motostuff pegs,. Great product also

The Shop

See All »
KTMsc
Profile picture for user KTMsc
Posts
134
Joined
1/7/2014
Location
Roseville, CA, USA
KTMsc 1/20/2017 8:38pm
1/20/2017 8:38pm
Fastway Evo Air Pegs in the low position.
RickA
Profile picture for user RickA
Posts
244
Joined
12/10/2016
Location
Duluth, MN, USA
RickA 1/20/2017 8:54pm
1/20/2017 8:54pm
I can see there is going to be lots of diversity here..
Moto520
Profile picture for user Moto520
Posts
3669
Joined
2/4/2013
Location
Schaumburg, IL, USA
Moto520 1/20/2017 9:00pm
1/20/2017 9:00pm Edited Date/Time 1/20/2017 9:14pm
Rapters are amazing but you will wear out your boot sole. Really helpful and one of the first mods that I make on a bike. Very expensive though and probably not worth the weight savings at all
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
Bruce372 1/20/2017 9:04pm
1/20/2017 9:04pm
Got some nice Ims ones for sale for a rmz450. Message me



151
Profile picture for user 151
Posts
536
Joined
9/15/2009
Location
Olive Branch, MS, USA
151 1/20/2017 10:13pm
1/20/2017 10:13pm
Bro, get with 2017!




yamahamx
Profile picture for user yamahamx
Posts
52
Joined
10/23/2016
Location
Paso Robles, CA, USA
yamahamx 1/20/2017 11:19pm
1/20/2017 11:19pm
151 wrote:
Bro, get with 2017! [img]https://p.vitalmx.com/photos/forums/2017/01/20/170433/s1200_spurz_ktm_98_2015_540x600.jpg[/img]
Bro, get with 2017!




Can't tell if that's a joke or not? What are those?
TeamGreen
Profile picture for user TeamGreen
Posts
37774
Joined
11/25/2008
Location
Thru-out, CA, USA
TeamGreen 1/20/2017 11:53pm
1/20/2017 11:53pm
HRC
drumheller34 1/21/2017 4:30am
1/21/2017 4:30am Edited Date/Time 1/21/2017 4:31am
TeamGreen wrote:
HRC
$4,000 for Ti foot pegs.
Excracingteam.com 1/21/2017 5:24am
1/21/2017 5:24am
Where did the arched sunline footpegs go?
Had them on my 16 ktm, but cant find them for 2017. They where great.
eric513anderson 1/21/2017 6:42am
1/21/2017 6:42am
Anybody have any reviews on the Torc1 Racing voltage pegs? They look pretty nice for the money. I've thought about upgrading the small pegs on my YZ
151
Profile picture for user 151
Posts
536
Joined
9/15/2009
Location
Olive Branch, MS, USA
151 1/21/2017 7:37am
1/21/2017 7:37am
151 wrote:
Bro, get with 2017! [img]https://p.vitalmx.com/photos/forums/2017/01/20/170433/s1200_spurz_ktm_98_2015_540x600.jpg[/img]
Bro, get with 2017!




yamahamx wrote:
Can't tell if that's a joke or not? What are those?
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction.

From what I hear it was so much better than they even expected, people are sort of blown away. Not sure if it's cool to just plug a business here, but they are on FB and easy enough to find.
Forty
Profile picture for user Forty
Posts
3091
Joined
7/27/2009
Location
Saint Paul, MN, USA
Forty 1/21/2017 7:39am
1/21/2017 7:39am
The stock pegs on my 2009 yz450f were the best pegs ever. Sharpen them just a little and go.
Travis_Hudson 1/21/2017 8:06am
1/21/2017 8:06am
Anyone got the inside line on some could pegs you can make lower? I have been using fast way for the last ten years or so but would be interested in some different options.
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
Bruce372 1/21/2017 8:55am
1/21/2017 8:55am
eric513anderson wrote:
Anybody have any reviews on the Torc1 Racing voltage pegs? They look pretty nice for the money. I've thought about upgrading the small pegs on my...
Anybody have any reviews on the Torc1 Racing voltage pegs? They look pretty nice for the money. I've thought about upgrading the small pegs on my YZ
Yes, I bought some.

When I saw the box, it said made in China and I should have sent them back at that point.

The fit was poor, I had to slightly grind the top of the mounting post so they fit inside the braxket.

Once mounted, I realized that the mounting holes were drilled off center, so the pegs hung down slighly. Because I had to grind them to get them mounted, sending them back at this point was off the table.

In the end, I put them on my other bike with a different bracket setup...I filed down the stoppers so they setup at the right angle.

Pit Row

See All »
jhansen510
Profile picture for user jhansen510
Posts
2405
Joined
2/10/2009
Location
GREENFIELD, MN, USA
jhansen510 1/21/2017 8:59am
1/21/2017 8:59am
151 wrote:
Bro, get with 2017! [img]https://p.vitalmx.com/photos/forums/2017/01/20/170433/s1200_spurz_ktm_98_2015_540x600.jpg[/img]
Bro, get with 2017!




yamahamx wrote:
Can't tell if that's a joke or not? What are those?
151 wrote:
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction. From what I...
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction.

From what I hear it was so much better than they even expected, people are sort of blown away. Not sure if it's cool to just plug a business here, but they are on FB and easy enough to find.
Then your friend copied someone else's idea. Rotating pegs have been around for a minute.
imoto34
Profile picture for user imoto34
Posts
3786
Joined
1/28/2010
Location
USA
imoto34 1/21/2017 11:16am
1/21/2017 11:16am
yamahamx wrote:
Can't tell if that's a joke or not? What are those?
151 wrote:
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction. From what I...
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction.

From what I hear it was so much better than they even expected, people are sort of blown away. Not sure if it's cool to just plug a business here, but they are on FB and easy enough to find.
jhansen510 wrote:
Then your friend copied someone else's idea. Rotating pegs have been around for a minute.
Do you have a link?
Jdirrrty
Profile picture for user Jdirrrty
Posts
43
Joined
9/16/2008
Location
Washington, UT, USA
Jdirrrty 1/21/2017 1:02pm
1/21/2017 1:02pm
Love my Fly pegs. If they are good enough for JT$ they are good enough for me!
151
Profile picture for user 151
Posts
536
Joined
9/15/2009
Location
Olive Branch, MS, USA
151 1/21/2017 6:08pm
1/21/2017 6:08pm
yamahamx wrote:
Can't tell if that's a joke or not? What are those?
151 wrote:
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction. From what I...
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction.

From what I hear it was so much better than they even expected, people are sort of blown away. Not sure if it's cool to just plug a business here, but they are on FB and easy enough to find.
jhansen510 wrote:
Then your friend copied someone else's idea. Rotating pegs have been around for a minute.


This existed before the 2017 crf450. Did Honda copy someone elses idea?

I'll buy you a set and you can let us know what you think. Maybe you will like them.

Bearuno
Profile picture for user Bearuno
Posts
5661
Joined
6/28/2014
Location
AU
Bearuno 5/18/2018 1:03am
5/18/2018 1:03am
151 wrote:
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction. From what I...
100% serious. A friend started XC gear and makes those pegs and also this incredible bar mount. They use urethane for vibration reduction.

From what I hear it was so much better than they even expected, people are sort of blown away. Not sure if it's cool to just plug a business here, but they are on FB and easy enough to find.
jhansen510 wrote:
Then your friend copied someone else's idea. Rotating pegs have been around for a minute.
imoto34 wrote:
Do you have a link?
Pivot Pegz have been around for many years now :

https://www.pivotpegz.net/

Me - I currently use KTMs 450RR pegs, for their length, on my CRE500. If Fastway do their long ADV pegs with the Ankle Savers, I'll snaffle them in a heartbeat.
DoubleA
Profile picture for user DoubleA
Posts
406
Joined
11/17/2017
Location
GB
DoubleA 5/18/2018 1:13am
5/18/2018 1:13am
I managed to get some brand new twenty Ti pegs for £40.

sgrimmxdad 5/18/2018 1:27am
5/18/2018 1:27am
We have had good luck with the Flo footpegs. I like the replaceable tips!
walent215
Profile picture for user walent215
Posts
2536
Joined
12/6/2014
Location
Ridgecrest, CA, USA
walent215 5/18/2018 5:15am
5/18/2018 5:15am Edited Date/Time 5/18/2018 5:15am
we've ran raptors, arched sunlines, PC and scar. the scars have the best feel imo.

Post a reply to: Best foot pegs? Fly Gator wide?