Scalvini exhaust sighting at REM Saturday

PaleBlue
Profile picture for user PaleBlue
Posts
1529
Joined
6/16/2009
Location
Essex, GB
PaleBlue 6/5/2012 6:19pm
6/5/2012 6:19pm
Yes absolutely. Especially with the 4T as that has kind of 'ball and socket' connection.
The Rock
Profile picture for user The Rock
Posts
8758
Joined
3/21/2007
Location
HAIKU, HI, USA
The Rock 6/5/2012 6:31pm
6/5/2012 6:31pm Edited Date/Time 6/5/2012 6:50pm
EDIT

As I recall MXA was pumped on the pipe but said the silencer didn't make that much difference.

I would call Pete Vetrano the distributor (and also the TM distributor) to be sure 909.608.0082
The Fast Guy
Profile picture for user The Fast Guy
Posts
81
Joined
4/1/2008
Location
Califon, NJ, USA
The Fast Guy 6/5/2012 8:15pm
6/5/2012 8:15pm
I have the Scalvini set up on my TM 2T complete with the full carbon silencer. It is awesome and completely change how my bike ran. I will say this though, Scalvini Italy has customer service beyond parallel. I had a problem with a weld on my silencer and they sent me brand new silencer!!! I was expecting just a replacement part and they went over and above! I will use their product on all my bikes from now on!
The Fast Guy
Profile picture for user The Fast Guy
Posts
81
Joined
4/1/2008
Location
Califon, NJ, USA
The Fast Guy 6/5/2012 8:16pm
6/5/2012 8:16pm
Here is another pic mounted on the bike

The Shop

See All »
FreshTopEnd
Profile picture for user FreshTopEnd
Posts
13360
Joined
8/16/2006
Location
Sacramento, CA, USA
FreshTopEnd 6/5/2012 9:34pm
6/5/2012 9:34pm
PaleBlue wrote:
Yes absolutely. Especially with the 4T as that has kind of 'ball and socket' connection.
2T question
PaleBlue
Profile picture for user PaleBlue
Posts
1529
Joined
6/16/2009
Location
Essex, GB
PaleBlue 6/5/2012 11:39pm
6/5/2012 11:39pm
PaleBlue wrote:
Yes absolutely. Especially with the 4T as that has kind of 'ball and socket' connection.
FreshTopEnd wrote:
2T question
It was a 2T answer. (with a 4T add on Wink ).
FreshTopEnd
Profile picture for user FreshTopEnd
Posts
13360
Joined
8/16/2006
Location
Sacramento, CA, USA
FreshTopEnd 6/6/2012 10:51am
6/6/2012 10:51am
PaleBlue wrote:
Yes absolutely. Especially with the 4T as that has kind of 'ball and socket' connection.
FreshTopEnd wrote:
2T question
PaleBlue wrote:
It was a 2T answer. (with a 4T add on Wink ).
Bummer. I really like the pipe and am picking up a bike in the next couple days that will need a pipe, and would look good with that. But it doesn't look like they have a USFS spark arrestor set up, which I have to have. Big fan of the Leo Vince silencers for build and quietness, and can get a good price on one.
seth505
Profile picture for user seth505
Posts
10216
Joined
4/1/2008
Location
SD, CA, USA
seth505 7/13/2012 7:02pm
7/13/2012 7:02pm
Bolting these on to my YZ in a few minutes! Psyched

keeptwostrokesalive 7/13/2012 7:14pm
7/13/2012 7:14pm
seth505 wrote:
Bolting these on to my YZ in a few minutes! Psyched [img]https://p.vitalmx.com/photos/forums/2012/07/13/IMG_3153_967755.jpg[/img]
Bolting these on to my YZ in a few minutes! Psyched

you lucky bastard.
FreshTopEnd
Profile picture for user FreshTopEnd
Posts
13360
Joined
8/16/2006
Location
Sacramento, CA, USA
FreshTopEnd 7/13/2012 8:05pm
7/13/2012 8:05pm
Wanted to pipe in that Michael/Rock sent me an email back then that he confirmed that the pipe will accept other silencers, at least for the application I was looking at.
pete24
Profile picture for user pete24
Posts
2733
Joined
10/20/2011
Location
Marlborough, MA, USA
pete24 7/13/2012 8:32pm
7/13/2012 8:32pm






i have used the pipe, with full carbon silencer, with fmf silencer, and fmf plated fattty with scalvini silencer, i think the stk pipe with scalvini silencer works best but i am a 49 year old "D" rider

seth505
Profile picture for user seth505
Posts
10216
Joined
4/1/2008
Location
SD, CA, USA
seth505 7/13/2012 9:51pm
7/13/2012 9:51pm
Pete your bike looks sick! Did you (or any other yz250 guys) have fitment trouble? I think my tabs are welded on wrong. I just tried to put mine on and:
1) I couldn't slide it on to the cylinder with orings installed
2) If I slide it on without orings, the pipe springs don't even keep tension. they are loose when fit on the tabs to hold them
3) the front lower tab seems to be welded wrong as it is no where near the correct location to fit the front lower mount/adaptor.

Confused!?!
pete24
Profile picture for user pete24
Posts
2733
Joined
10/20/2011
Location
Marlborough, MA, USA
pete24 7/14/2012 3:20am
7/14/2012 3:20am
yup i cant get mine on with the orings in it either i have to call and see whats up
Barrett57
Profile picture for user Barrett57
Posts
2270
Joined
8/31/2010
Location
GB
Barrett57 7/14/2012 4:15am
7/14/2012 4:15am
That RM250 is a work of art, seriously nice bike.
seth505
Profile picture for user seth505
Posts
10216
Joined
4/1/2008
Location
SD, CA, USA
seth505 7/14/2012 8:47pm
7/14/2012 8:47pm
pete24 wrote:
yup i cant get mine on with the orings in it either i have to call and see whats up
So Pete, I got mine on tonight. I had to shave down the friggin o-rings so it would slide on the cylinder. I shaved down the OD of each o-ring with a dremel.

Looks sick now that it's actually on and is definitely louder than my old Leo Vince silencer. Now I just need new plastics...



MOTO120
Profile picture for user MOTO120
Posts
1375
Joined
3/21/2010
Location
MOTO, IL, USA
MOTO120 7/14/2012 9:39pm
7/14/2012 9:39pm
pete24 wrote:
[img]https://p.vitalmx.com/photos/forums/2012/07/13/100_3780_202405.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2012/07/13/100_3778_893686.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2012/07/13/100_3779_408632.jpg[/img] i have used the pipe, with full carbon silencer, with fmf silencer, and fmf plated fattty with scalvini silencer, i think the stk...






i have used the pipe, with full carbon silencer, with fmf silencer, and fmf plated fattty with scalvini silencer, i think the stk pipe with scalvini silencer works best but i am a 49 year old "D" rider

Who built the tank? Looks ridiculous!!!!
jeffro503
Profile picture for user jeffro503
Posts
27651
Joined
7/22/2007
Location
St Helens, OR, USA
jeffro503 3/29/2016 12:26pm
3/29/2016 12:26pm
Was wondering @Digger29 or any others in here about the Scalvini and using it on an 06' RM 250. Was thinking about the pipe only and was wondering what the HP curve is like? Is it a more bottom end type power or top end? I'm running a FMF Gnarly on my bike now and like the low end grunt.
IWreckALot
Profile picture for user IWreckALot
Posts
8677
Joined
3/12/2011
Location
Fort Worth, TX, USA
IWreckALot 3/29/2016 12:30pm
3/29/2016 12:30pm
jeffro503 wrote:
Was wondering [b]@Digger29[/b] or any others in here about the Scalvini and using it on an 06' RM 250. Was thinking about the pipe only and...
Was wondering @Digger29 or any others in here about the Scalvini and using it on an 06' RM 250. Was thinking about the pipe only and was wondering what the HP curve is like? Is it a more bottom end type power or top end? I'm running a FMF Gnarly on my bike now and like the low end grunt.
Motocross Action Magazine wrote this article several years ago. It covers many popular exhaust systems including the Scalvini. There are dyno numbers and everything included. Unfortunately it's for the Yz, but maybe it'll apply to the RM?

http://motocrossactionmag.com/news/searching-for-the-ultimate-2013-yz25…

Pit Row

See All »
Motofinne
Profile picture for user Motofinne
Posts
11621
Joined
1/4/2014
Location
FI
Motofinne 3/29/2016 12:38pm
3/29/2016 12:38pm
If i would ride a 2 stroke these days i would use an Scalvini pipe or if i would be on a budget an HGS pipe.
seth505
Profile picture for user seth505
Posts
10216
Joined
4/1/2008
Location
SD, CA, USA
seth505 3/29/2016 12:51pm
3/29/2016 12:51pm
I had stock, fmf and Scalvini on my yz250 and liked the Scalvini best.
jeffro503
Profile picture for user jeffro503
Posts
27651
Joined
7/22/2007
Location
St Helens, OR, USA
jeffro503 3/29/2016 1:00pm
3/29/2016 1:00pm
Hmm? Well it seems like on the YZ 250 at least , that it helped the bottom and mid range over stock. Which is kind of what I was looking for. Actually never ran the stock pipe as this RM of mine came with the gnarly pipe. Maybe I better give this Scalvini a shot.
Andy_Greenney 3/29/2016 2:14pm
3/29/2016 2:14pm
Damn that pipe looks sweet, proper factory look. What's the longevity like on those type (band welded) pipes?
Crisp BRAAAP! 3/29/2016 4:31pm
3/29/2016 4:31pm
Sweet, sweet, beautiful pornography. Looks so much better than mine and I can't have it. But I can dream...
GeorgiePorgie 3/29/2016 4:38pm
3/29/2016 4:38pm Edited Date/Time 3/29/2016 4:38pm
Just thought about grabbing one of these set ups for my 144. Not sure on the performance though how do these stack up against pro circuit and FMF ?
rocketsocks26 3/29/2016 6:09pm
3/29/2016 6:09pm
@jeffro503 i had a scalvini on my 15 300sx, i also had a pc, fmf, and bills systems, the scalvini was the best imo. My bills was the fake "cone look" pipe, the bills is about the same price as the scalvini but no where near close in quality.
jeffro503
Profile picture for user jeffro503
Posts
27651
Joined
7/22/2007
Location
St Helens, OR, USA
jeffro503 3/29/2016 10:24pm
3/29/2016 10:24pm
rocketsocks26 wrote:
@jeffro503 i had a scalvini on my 15 300sx, i also had a pc, fmf, and bills systems, the scalvini was the best imo. My bills...
@jeffro503 i had a scalvini on my 15 300sx, i also had a pc, fmf, and bills systems, the scalvini was the best imo. My bills was the fake "cone look" pipe, the bills is about the same price as the scalvini but no where near close in quality.
Yeah seems to be a pretty popular pipe. I think here in the next week or so I'll get one ordered up. If they perform any where near as good as they look , I'll be a happy man.
shanes
Profile picture for user shanes
Posts
578
Joined
3/4/2014
Location
AD
shanes 3/30/2016 12:10am
3/30/2016 12:10am
i run the Scalvini pipe and silencer on my TM 300 , really happy with it , i run the long silencer as wanted some more top end and over rev the short one signed off to quick and the 300 doesn't need any more mid range .

another option for the YZ guys in the TYGA pipe , weight and dyno numbers were impressive they have a dealer in USA as well , they also have done a pipe for the KTM 250 but i don't think it has been released yet

http://tyga-performance.com/site/index.php?cPath=72_1047_1278_1279



Lightning78
Profile picture for user Lightning78
Posts
6353
Joined
12/12/2007
Location
Huntington Beach, CA, USA
Lightning78 3/30/2016 1:09am
3/30/2016 1:09am
Bruce372 wrote:
the cone pipes do look cool. last time i was in the UK, i picked up a DEP system- they make a version especially for 144...
the cone pipes do look cool.

last time i was in the UK, i picked up a DEP system- they make a version especially for 144 bigbores; plus their silencer is quite long for Euro spec

Lightning78 wrote:
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have...
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have a slight tilt forward and I'm not liking them as much as I thought I would ..... HoweverI need some lower than stock pegs and judging from the tall seat im assuming youre a tall rider

Sorry if I hijacked just needed to know
Bruce372 wrote:
this could be you lucky day.....those pegs are actually moose offroad with the 12mm rear offset. i have a second set i took off my rm250...
this could be you lucky day.....those pegs are actually moose offroad with the 12mm rear offset. i have a second set i took off my rm250, they are yours for $50 shipped.

I had a set of those on my rm250 also and took them off right before i sold i ...put em on my yz250 and still loving them Smile
Trav138
Profile picture for user Trav138
Posts
1478
Joined
3/8/2012
Location
USA
Trav138 3/30/2016 8:08am
3/30/2016 8:08am
So the Scalvini pipe (two stroke) will not fit up to any other silencers except the Scalvini? So you have to run the complete system?
IWreckALot
Profile picture for user IWreckALot
Posts
8677
Joined
3/12/2011
Location
Fort Worth, TX, USA
IWreckALot 3/30/2016 8:13am
3/30/2016 8:13am
Trav138 wrote:
So the Scalvini pipe (two stroke) will not fit up to any other silencers except the Scalvini? So you have to run the complete system?
You can run a Scalvini pipe and whatever silencer you want from the way I understand it. The link I posted above, said they actually preferred the Scalvini pipe with the YZ stock silencer.

Does anyone know how or where you can get one of these in the states? BTO, RM, and any other dealers I see don't stock or sell them. I've wanted one for awhile now but I don't know where to get one stateside.

Post a reply to: Scalvini exhaust sighting at REM Saturday