First Ride | ProTaper ACF Handlebars ACF stands for aluminum, carbon fiber. ProTaper's latest bar replaces some of the aluminum towards the end of the bar with carbon fiber to make it roughly 50 grams, or 20 percent, lighter than the Evo bar.
Posted by Klinger on 2/18/2022 6:24 PM
Posted by Klinger on 1/28/2022 1:28 PM
The Good:
Easy to install
The Bad:
They are super thin. The bumps are at least half as high as the glue on Pillowtops.
Overall Review: I've used glue on Pillowtops for over ten years. They legit help with arm pump. The clamp on pillowtops are NOT the same grip. They have been shaved down a LOT to make up for the extra tube thickness beneath the grip.Posted by queen of spodes on 12/8/2021 12:12 PM
The Good:
Universal for modern bikes, simple install, works just like it is supposed to.
The Bad:
Small click when riding, the priciest option for holeshot devices.
Overall Review: If you are going to line up to race motocross, a holeshot device is mandatory. But traditional holeshot devices usually take two people with good timing to engage (unless you are Ken Roczen). Enter the ProTaper SELA (Self-Engaged Launch Assist) Holeshot Device that makes it a one-person...Posted by Klinger on 10/22/2020 5:38 PM
Posted by GuyB on 12/5/2019 6:47 PM
Posted by GD2 on 11/1/2018 8:51 AM
The Good:
Couldn't be simpler, super comfort from the pattern, and throttle cams match nearly all bikes.
The Bad:
Limited pattern options, you might be out of luck if you are a die hard full waffle guy/gal.
Overall Review: There’s only a few points of contact between the rider and the bike and they make a big difference in how the bike feels. The grips are one of the most important contact points for me. When the grips are too harsh, I feel like I am holding directly onto the metal bars and my hands will hurt for ...Posted by ginger969 on 8/28/2018 1:58 PM