Fastway Lowering Pegs

Related:
Create New Tag

10/15/2019 9:57 AM

14-18 yz250f and I have been looking at getting the fastway pegs to lower them and move them back. When I look online at BTO they are saying it can’t be set in the lower position. Anyone have these or know best way around it? I looked at the EVO 4

|

10/15/2019 11:49 AM

I have the FLO lowering pegs on my KTM. Night and day better for us tall guys! They also make them for Yamaha.

12mm lower (same as Fastway). I got mine through BTO

|

10/15/2019 12:44 PM

Zycki11 wrote:

14-18 yz250f and I have been looking at getting the fastway pegs to lower them and move them back. When I look online at BTO they are saying it can’t be set in the lower position. Anyone have these or know best way around it? I looked at the EVO 4

This question and Topic has been asked several times. I have 19 YZ450 with fastway pegs and previously on my 14 and 11 Yamaha. Yes they fit the 250 as they are the same mounts. They are at least 1/2 inch lower.

|

10/15/2019 1:16 PM

IMS makes pegs I know for my Husky that were 5mm lower and 5mm further back. Check them out could also cost less.

|

10/15/2019 1:30 PM

Yeah I’m excited to try them out. I ride over the front and hopefully this will help me stay neutral and comfy.

|

10/15/2019 5:02 PM
Edited Date/Time: 10/15/2019 5:17 PM

I ordered them for my ‘20 YZ450 and can confirm without a doubt that THEY DO NOT LOWER THE PEGS. It states it right on the package that they will not work in the lower position on the newer YZs. Don’t buy them! I actually installed them and measured (out of curiosity), and with the cleats installed they were taller than the stock pegs.

Raptor Titanium can custom make them up to 8mm down or 12mm back, but no combination of down/back, for about $300.

Flo pegs are 12mm lower on the Yamahas, too, but I’d go with the Raptors if it’s in your budget.

|

10/15/2019 5:20 PM

Zycki11 wrote:

14-18 yz250f and I have been looking at getting the fastway pegs to lower them and move them back. When I look online at BTO they are saying it can’t be set in the lower position. Anyone have these or know best way around it? I looked at the EVO 4

BAD10 wrote:

This question and Topic has been asked several times. I have 19 YZ450 with fastway pegs and previously on my 14 and 11 Yamaha. Yes they fit the 250 as they are the same mounts. They are at least 1/2 inch lower.

i asked this exact same question a month or so ago and BAD10 posted pics to show they work. I bought them and they absolutely work in the lower/back position. They also immediately made a huge difference. So much easier to stand up out of corners for me. I have a 2019 YZ250F. Thanks again BAD10.

|

10/15/2019 5:22 PM

|

10/18/2019 7:04 PM

Zycki11 wrote:

14-18 yz250f and I have been looking at getting the fastway pegs to lower them and move them back. When I look online at BTO they are saying it can’t be set in the lower position. Anyone have these or know best way around it? I looked at the EVO 4

BAD10 wrote:

This question and Topic has been asked several times. I have 19 YZ450 with fastway pegs and previously on my 14 and 11 Yamaha. Yes they fit the 250 as they are the same mounts. They are at least 1/2 inch lower.

MotoChris wrote:

i asked this exact same question a month or so ago and BAD10 posted pics to show they work. I bought them and they absolutely work in the lower/back position. They also immediately made a huge difference. So much easier to stand up out of corners for me. I have a 2019 YZ250F. Thanks again BAD10.

How did you place the pegs? I can’t make them work in the lowering position.

|

10/19/2019 5:22 AM

I have a 2019 so there could be a difference in my set up than yours. Mine mounted up with no problems in the lowered position. Maybe BAD10 can help since he has used these on several model years.

|

4/27/2020 7:37 PM

@Zycki11 , did you manage to make them work in the lowered position?

Anyone has a picture from underneath, mounted in the lowered position on a yamaha?

Thanks!

|

4/28/2020 6:42 AM

I’m 6’3”, how would these help me?

|

4/28/2020 6:50 AM

lfrider wrote:

@Zycki11 , did you manage to make them work in the lowered position?

Anyone has a picture from underneath, mounted in the lowered position on a yamaha?

Thanks!

I didn’t. I still have them but I went back to stock pegs.

|

4/28/2020 7:38 AM

What a coincidence.....I just bought a set for my kx250. I'm 6'3 and any bike I had these pages on did make a huge difference for me in the lower position, not only bec they're lower but moved back also. It helps with being more centered on the bike.

I cant wait to ride with them on.....does anyone run the 12mm cleats in the center row with 10mm on the front and rear edges? Or is it best to just run 10mm cleats all around?

|

4/28/2020 9:46 AM

+2 on the Flo yamaha lowering pegs, I love mine.

|

4/28/2020 1:40 PM
Edited Date/Time: 4/28/2020 1:43 PM

mhog wrote:

+2 on the Flo yamaha lowering pegs, I love mine.

+3, I love the FLO lowering pegs. I was hesitant to pull the trigger but I’m 6’3” and they made a huge difference for me. Only $130, too.

|