Recent Activity

All

Well I have to say it saddens me to see this topic posted and the responses in this thread, I know I have just lurked up until this point and only came here to read but after reading this thread I had to register and reply....I know I am most likely going to regret this but I am taking the...

TheoreticalMotocrosser Added a reply to UFC vs SX promotion

12/31/2016 11:06am
I prefer MX to be a small sport... I like knowing that I can roll to the track and it be my escape from the complete tomfuckery that exists in the rest of the world...

TheoreticalMotocrosser Added a reply to Engine case mismatch

12/28/2016 12:31pm
Dowel pins sit snug in the cases. I might just let it go and see if the base gasket takes care of it. 0.005" was an approximation but its bigger than what I would accept as normal.

TheoreticalMotocrosser Added a reply to Cleaning alum help, 95 CR125

12/28/2016 10:30am
Blue Magic polish or old fashioned Brasso works pretty good at removing the built up oxidation on engine cases and stuff. I usually apply it with a toothbrush then buff it off like normal with a rag or paper towel

TheoreticalMotocrosser Added a reply to Galfer 270 kit

12/27/2016 11:15am
Yea I can see the marking, doesnt seem to match up with anything other than where the brake pads are. Any dirt/debris in the pads themselves?

TheoreticalMotocrosser Added a reply to Torqing Oil Filter bolts?

12/27/2016 11:13am
It's always a good idea to torque down any bolts going into aluminum because of how easy they are to strip out But you might want to take the oil filter back out and check if there is any debris on the sealing surfaces or if the o-ring got damaged (if it has an o ring) Side note, most torque...

TheoreticalMotocrosser Added a reply to Galfer 270 kit

12/27/2016 8:30am
Lol first take the new bracket off the fork then take the old bracket off the caliper then put the new bracket onto the caliper then put the assembled caliper/bracket onto the fork Silly The new bracket (black) replaces the stock one that is already on the caliper.