Recent Activity
All
FGR01 Liked a reply to forum topic 2022 ktm 150sx cylinder questions
6/29/2023 4:04am
Can you feel any of those marks with your fingernail? Especially this one in red.
This forum topic has 9 replies.
SmokinJoe439 Liked a reply to forum topic 2022 ktm 150sx cylinder questions
6/29/2023 4:04am
I have the same hours on my 21 I went with an A piston. Around 40 hrs is when you should consider a B possibly. Greatly depends on the cylinder plating wear then. B piston could be to tight and prematurely wear out the plating faster.
This forum topic has 9 replies.
Swarley814 Added a reply to 2022 ktm 150sx cylinder questions
6/29/2023 4:04am Can’t feel any of the marks with my fingers. Just get a hone like this one?
Swarley814 Added a reply to 2022 ktm 150sx cylinder questions
6/28/2023 8:08pm
Swarley814 Started a new thread 2022 ktm 150sx cylinder questions
6/28/2023 8:07pm Looking for some opinions on my situation. Bought a 2022 ktm 150 with 15.7 hours on it and the bottom rod bearing went out. I bought the bike blown up to rebuild myself but I figured I’d reach out to ktm with such an early failure to see if they could help me out. KTM is paying for the bottom...
This forum thread has 9 replies.
Swarley814 Started a new thread Any track Builders in the PNW
3/21/2023 8:30pm I'm Looking for someone to help me build a track on my land. I have a general layout and a few jumps but building jumps with my tractor is very time consuming. I don't have thousands to throw around for someone like dream tracks or dirt worx to build it, just seeing if anyone local has equipment they could bring...
This forum thread has 2 replies.
Swarley814 Added a reply to PNW private tracks
2/6/2022 3:51pm Lol I’m not whining at all. I think everyone would enjoy more riding time and options to ride throughout the week.
Swarley814 Added a reply to PNW private tracks
2/6/2022 11:48am Yea i get it when you look at it that way. I guess for me its more how expensive it is vs how much riding you get in. I have no problem paying $40 or even $50 if its an open track that i can go out and do my motos as i please. But its the days where i...
Swarley814 Added a reply to PNW private tracks
2/6/2022 11:31am With how busy Albany is every Wednesday night I don't see why they don't add a couple more practice days through the week. All of the tracks around here for that matter. Maybe if there was more days/places to ride then it would spread out the amount of people each day so it could be a free ride instead of...
Swarley814 Started a new thread PNW private tracks
2/6/2022 8:24am Is there anyone out there with a private track willing to let people come and ride? I am willing to help prep/pay for diesel/pay an entry fee and sign liability form. I enjoy most of the public tracks around here but the prices are starting to get pretty steep. I think High Desert is the cheapest at $25 but that's...
This forum thread has 22 replies.
Bruce372 Liked a reply to forum topic KTM/Husqvarna 125/150 parts
11/4/2021 9:03am
Great seller, texted on Monday morning and parts from Oregan to nor cal this afternoon!
This forum topic has 1 reply.
Swarley814 Started a new thread KTM/Husqvarna 125/150 parts
11/1/2021 2:11pm I sold my 2018 TC125 and have some extra parts laying around. I can send pics if requested. Make an offer on anything or package deals. Will workout shipping costs depending on what you want. No-Toil Air filters 5 used Fly 51T blue rear sprocket KTM air filter wash cover Acerbis chain slider and guide 503-754-22fivenine
This forum thread has 1 reply.
Swarley814 Started a new thread ISO SSS forks
9/29/2021 5:30am I have a 2005 yz 125 that im looking to do a SSS front end swap on. Preferably off of a 250 or 450 due to the spring rate but let me know what you have. Looking for the whole front end with triple clamps as well to be able to do an easy swap. Thanks
This forum thread has 0 replies.
Swarley814 Added a reply to 2007 KYB SSS - 2002 to 2004 YZ250
9/26/2021 6:46am Are these still available?
Swarley814 Added a reply to 1979 yz 125 carb issues
1/26/2021 4:23am This style of carb uses 2 fabric washers to seal, no o-rings. And I checked that that floats float out of the carb also.
Swarley814 Started a new thread 1979 yz 125 carb issues
1/25/2021 5:58pm I am doing a winter rebuild on my 79 yz 125 and I am stuck. prior to rebuild fuel would slowly leak out of the overflow if i left the gas on. After rebuilding the top end i put everything back together and did my first heat cycle. The next day I went out to start it up, turned on...
This forum thread has 3 replies.
Swarley814 Added a reply to 1979 yz125 petcock issue
1/3/2021 7:38pm It’s a brand new petcock and o ring. I thought that would fix it too lol
Swarley814 Started a new thread 1979 yz125 petcock issue
1/3/2021 5:59pm Any of you guys have experience with jimmy rigging 79 yz125’s? I’m doing a winter rebuild and my petcock is leaking where it mounts up to the tank. It’s a plastic tank and instead of being flat where it mounts up, it’s caved in a bit. The old petcock has what looks like a piece of inner tube that someone...
This forum thread has 3 replies.
Swarley814 Added a reply to 1979 yz125 petcock issue
1/3/2021 4:44pm
Swarley814 Started a new thread Whats it worth? Anyone interested?
7/17/2020 6:18pm I have a LEM Motors LX2 sport that I'm looking to sell but have no idea what its worth. Pretty roached shape, clutch is locked up. Motor turns over when you wheel it around. Not worth it for me to try to fix. Any ideas? 
This forum thread has 1 reply.