Recent Activity

All

SeaClassExpert Liked a reply to forum topic Stark VARG Test, T-Minus Three Months

2/20/2022 11:45am
Are they going to host you guys in Sweden or someplace else? When I flew into Arlanda, there was a BITCHING sand track right next to the runway that I landed on.
This forum topic has 124 replies.

(C)oal(R)egion250 Liked a reply to forum topic Looking for a Honda CR Clevis

3/30/2021 8:33am
The Kawasaki shock body will work on the CR. The bearing is a little wider but if your CR frame has time on it chances are the shock will fit right in. If not a little work with a hand file would do the trick. Side by side the the KXF and CR shock body is the same length with other slight differences. The problem is that the Kawi shaft and Clevis are shorter than the Honda shaft/Clevis. I’d say your best option would be to get a donor kyb shock from the 09-12 450 and go from there. Get...
This forum topic has 3 replies.

rostocker Added a reply to Looking for a Honda CR Clevis

3/10/2021 2:51am
I cant say for sure.. but i believe it will be easier to make it work with the short shock that you have. The upper bearing is wider on the kxf shock so probably needs a mm of milling to get the right clearance, and the clevis is wider, but easy to shim. Dont know about how's the length of...

rostocker Started a new thread Looking for a Honda CR Clevis

3/3/2021 10:55am
Looking for a kyb clevis, 93mm long I believe Gonna make a kxf to cr conversion for my kyb A-kit, and therefore looking for a clevis or a complete shaft assey for the 05-07 CR
This forum thread has 3 replies.

rostocker Started a new thread BD full tilt copy cat build, the electronics

12/13/2019 2:28pm
Me among others admire Blackdimonds Full Tilt Cr 250 build so this is my tribute and attempt to make a similar bike but to cheaper price (and less trick parts). And as I live in Sweden I will use some different suppliers than BD These is my building stones so far: A CR250-07 in fairly good shape (100h tot) A...
This forum thread has 31 replies.

Motoxdoc Liked a reply to forum topic How come Herlings can and Eli can't????

8/10/2018 4:53pm
The only thing I can come up with is...one of them rides too fast for their pants!
This forum topic has 24 replies.

rostocker Added a reply to How to find parts for Showa A-Kit?

1/27/2018 8:44am
All right! Yes that and some cosmetic parts (like the anodized parts on the compression adjuster) Now that I know what to use regarding wear parts that's no problem anymore. However the BIG oversized comp adjuster is my main concern now. I would like to change the visible parts there, but I guess here I need to turn to a...

rostocker Added a reply to How to find parts for Showa A-Kit?

1/27/2018 6:26am
I did a little research regarding the RM shock. On my shock there is a 18x50 shaft/cylinder and that's the same as the RM125/250 2001-8 RMZ250/450 2005-9 Any input on this?

rostocker Started a new thread How to find parts for Showa A-Kit?

1/25/2018 1:17pm
I have an old a-kit shock from showa for my cr250-07. It's quite beat up so I want to refurbish it.. but I can't find any spare parts lists or anyone that seems to offer parts online? KYB seems to be much easier to find spares to. Any advice?
This forum thread has 11 replies.
Anyone that have cut the subframe? I believe both Fonseca and RC had their subframes cut? (and they kind of have the same statue as me) I tried to find some good photos, i didn't, but I think you can see a difference in the angle? If someone have done it (successfully) I would like to hear about it and...

rostocker Started a new thread Pants for short legs?

11/22/2017 1:12pm
I use 32" pants because I use back protection and sh*t. But my legs are too short for my 32" shift pants but I need the width.. Im looking for a pant with shorter legs than my shift pants. Blink
This forum thread has 7 replies.

rostocker Added a reply to Pants for short legs?

11/21/2017 7:38pm
Woohoo thanks mate Laughing My main problem are the knees of the pants are by my ankles (kinda) instead of where they should be.. Dizzy