Recent Activity
All
chuckdavies Liked a reply to forum topic KX80 / 85 Pro Circuit Clutch Cover WANTED
9/20/2026 8:05am
Legend! I’ll take it, thanks 
Full steam ahead now! Just finished up welding the frame tabs for frame guard and carbon skid plate so it can go off to powdercoat. Youtube build series of this bike starting soon
Full steam ahead now! Just finished up welding the frame tabs for frame guard and carbon skid plate so it can go off to powdercoat. Youtube build series of this bike starting soon
This forum topic has 2 replies.
quiknic Liked a reply to forum topic KX80 / 85 Pro Circuit Clutch Cover WANTED
9/20/2026 8:05am
Nice Chuck can't wait to see it come together. I bought a NOS PC Mag cover a few years ago in hopes of also building a Bubba tribute bike. However, I currently have several other projects inline to compete before even thinking about starting it. I may be inclined to sell you this as it will also save me thousands of dollars in the long run if I live through your build and do not have to duplicate perfection!!! Send me a DM and we can figure it out.
This forum topic has 2 replies.
arvid Liked a reply to forum topic Kx 125 2002
9/19/2026 7:53am
Tecknical tuch have it
This forum topic has 4 replies.
Bman_145 Liked a bike check 2001 Pro Circuit Vohland Replica
9/10/2026 2:03pm
This bike check has 2 comments.
mikebrownsound Added a reply to Kx 125 2002
9/10/2026 10:32am The 92210A?
tblazier Liked a forum topic Kawasaki KX250 History Part 3: 1990-1999
9/6/2026 3:58pm
Part three of my KX250 history series is live on YouTube. This instalment covers the 250 Kwackers from 1990-1999.
This forum topic has 1 reply.
-MAVERICK- Liked a reply to forum topic Kick a** two strokes!
9/1/2026 12:37pm
Content cannot be rendered.
This forum topic has 10447 replies.
tblazier Liked a reply to forum topic KX250 History Part 2: The 1980s
8/26/2026 2:44pm
I am working on the 1990s right now.
This forum topic has 4 replies.
tblazier Liked a reply to forum topic KX250 History Part 2: The 1980s
8/26/2026 2:44pm
Here is Part 1 covering the seventies if you missed it.
This forum topic has 4 replies.
tblazier Liked a forum topic KX250 History Part 2: The 1980s
8/26/2026 2:44pm
Here is part 2 of my KX250 History Vid covering the green machines of the 1980s.
This forum topic has 4 replies.
mikebrownsound Added a reply to Star Racing Yamaha Announces Withdrawal from 2026 MXoN
8/24/2026 7:56pm So no Deegan, or the Lawrence brothers MXDN this year. 😑 https://racerxonline.com/2026/06/02/hunter-lawrence-states-he-and-jett-…
vetmotoxer34 Liked a forum topic 1980 Honda CR125 Factory Edition Build
8/19/2026 12:14pm
Year/Make/Model: 1980 HONDA 125 ELSINORE MOTOR SPECS – 2 STROKE (MOD) CYL: OEM / TEFLON COATED / BORE:56.50mm HEAD: OEM / TEFLON COATED PISTON: WESICO. BOOST PORT HOLE MOD / DOME CERAMIC COATED / SKIRT COATED .000.5 SQUISH: .031.5 (.8MM) PISTON CLEARENCE:.002.5 RING GAP: .009 BASE GASKET: OEM HEAD GASKET:COPPER PLUG: NGK BR9EIX GAP ( .022). ADDITIONAL 1MM SPARK PLUG SPACER CRANKSHAFT: OEM. BALANCED / REM PROCESS / ROD SHOT PINNED AND REM PROCESS / PEN WELDED. ROD SIDE CLEARENCE .021 / JOURNAL SPREAD 2.167.5 AT PEN AND 180 OPPOSITE OF PEN. REED BLOCK: V-FORCE / OEM REED BOOT MOTOR...
This forum topic has 2 replies.
FiendzCC Liked a reply to forum topic Mullennix '02 CR250
8/16/2026 12:20pm
More time in the blast cabinet this week. Spent so much time on the clamps, I almost forgot to blast the rest of the hardware. I was reminded of this when I went to put everything together late at night, well past blasting hours. Ready to install after blast the following night: Top bearing ready to do it's thing. You know how I always have bad luck with Motion Pro tools and am honest about my experience and will probably never receive any support from them on builds in the future? Well, this one worked great: My dad just had...
This forum topic has 89 replies.
mikebrownsound Added a reply to Pro-X or Wossner connecting rod for KX125
8/8/2026 3:26pm Pro-X rods are made in the same factory in Japan wich supplies OEM rods for several of the major manufactures, more than often even the same exact material is used and dimensions and even manufacturing tools. But better price than the oem stock. basically just stamping the Pro-X on there instead of the OEM logos.
CLT809 Liked a reply to forum topic RMZ250 AX Team Build (with old JGR & BarX parts)
8/4/2026 9:56am
Some updates now that AX is done. Our 2026 setup looked AMAZING once again thanks to Throttle Syndicate. I have a few ideas rolling around my brain for next year, I think we'll be able to keep the tradition of beautiful RMZ's rolling into next year. My 250 with a complete JGR works engine is on loan right now for supercross, and I’m going back through the other 250’s as well as studying a 2023 (or at least that’s what was stamped on it) BarX motor that was blown up and included in the sale of the remaining BarX suzuki...
This forum topic has 33 replies.
CrGuy2T Liked a reply to forum topic 05-07 cr 125-250 Showa a kit mint! SOLD!!!!
8/4/2026 5:57am
Bike and wheels are sold... suspension is all that's left 5k usd.. 👎🏻 🤡 the new generation of vital is a disaster. Used to be a cool place...
This forum topic has 3 replies.
CrGuy2T Liked a reply to forum topic 05-07 cr 125-250 Showa a kit mint! SOLD!!!!
8/4/2026 5:50am
SOLD!!!!
This forum topic has 3 replies.
aavee211 Liked a bike check Kx125 1999 Splitfire
7/31/2026 1:39pm
This bike check has no comments yet.
RussB Liked a reply to forum topic Another RM 250 build
7/25/2026 3:05pm
I personally like the original front number plate and mudguard. I've been riding RM's for over 15 years and did the RMZ front plastic swap for a long time. In the end, every RM I saw also had the same swap done, it almost became a bit boring and over done. I've seen gone back to all original. It's becoming a classic bike, no need to try make it something it isn't. Can't stand the re style kits 🤢 Here's my pride and joy
This forum topic has 5 replies.