Recent Activity

All

BlairYZ250 Started a new thread 140 hour 2019 KTM 150SX. What will need replacing?

11/15/2023 10:55pm
A guy I know from racing is selling a 2019 150 with 140 hours for 4k. He bought it with 120 hours off of a younger kid that just rode it around a farm. The bike is super clean for that many hours and I’ve been wanting one forever. I’m just wondering what all is gonna need replacing soon. He...
This forum thread has 5 replies.

BlairYZ250 Started a new thread 2018 250SXF stripped oil filter cover threads.

9/18/2018 12:30pm
Went to tighten down the cover for my oil filter and pulled the threads out of the bottom bolt hole. I drilled, tapped it and used a helicoil. The only thing I don't know is if it's like Yamahas where oil runs through there where I drilled out. Do I need to do anything else or should it hold? I...
This forum thread has 3 replies.

BlairYZ250 Started a new thread 2018 250sxf oil screen bolt stripped.

9/11/2018 11:32am
Went to change the oil on my bike and I could not get the bolt for the oil screen by the shifter. I ended up rounding it off. What can I do? I'm literally so pissed off at this bike. I swear the bolts are made out of plastic. I called dealership and they don't even want to mess with...
This forum thread has 8 replies.

BlairYZ250 Started a new thread Riding after stitches?

9/10/2018 6:59pm
Was practicing today and overshot a jump. I'm at the hospital now about to get stitches on my chin. They say I'll probably get 8-10 stitches. That's all I know. I have a race Sunday and I'm wondering if I'll be good to ride as long as I'm careful. It's about a 3 inch cut on the bottom of my...
This forum thread has 40 replies.

BlairYZ250 Added a reply to Riding after stitches?

9/6/2018 7:54pm
Thank you for understanding. I love riding and only being off 7 days a month this is literally me losing 1/6 of my riding this year

BlairYZ250 Started a new thread 2018 250sxf stalling when cold. Normal?

9/5/2018 5:33am
I have a 250sxf that has 30 hours now. I'm not sure if I'm just being paranoid but sometimes if the bike sits a few days and I start it it'll die out I'd I give it any gas and sometimes at idle until it warms up a little then it's fine. Usually if it idles for like 20 or...
This forum thread has 1 reply.
I just got a super clean yz250. Checking it over closer I noticed at the bottom of the shock where the linkage goes through the bottom, I can move the shock side to side about 1/8 inch left and right. No up and down play and none of my other yz do this. Was just wondering if this is normal...
This forum thread has 1 reply.

BlairYZ250 Started a new thread Need help with yz250 fork swap

4/2/2018 11:32pm
I have an 06 yz250 but it has 05 shitty forks. This bike beats me up cause the suspension is so shitty. It has the newer clamps since it's an 06. I'm wondering if I can just drop 250f forks in? Thanks
This forum thread has 3 replies.

BlairYZ250 Started a new thread 2007 yz250

6/10/2017 2:06pm
Got a crazy ass deal on an 07 yz250. 1900 bucks. Bike was clean as hell when I got it, new top end, the usual 2 stroke goodies. fast forward 40 hours later I noticed a burning tranny oil smell. Figured it was my crank seal so went to change it and noticed play in my primary drive gear...
This forum thread has 11 replies.

BlairYZ250 Added a reply to 2007 yz250

5/15/2017 4:31am
Yes they are the 05 forks and shock, set up for my height and weight though because the girl I bought it from is a similar build.

BlairYZ250 Added a reply to 2007 yz250

5/14/2017 12:11pm
Cracked piston skirt, cylinder needs replated, crank webs are worn. I work at a dealership so getting parts is easy. Oem piston and rings, bearings, gaskets, seals and a hot rods crank all for 330 bucks. Sending my cylinder to powerseal next week sometime for a freshen up.