Kick a** two strokes!

mtb133
Posts
29
Joined
1/5/2022
Location
Erie, PA US
6/18/2025 5:50am
mtb133 wrote:
2022 RMZ250 chassis 2007 RM250 engine

2022 RMZ250 chassis 2007 RM250 enginePXL 20250427 211639500 1.jpg?VersionId=SEmOp1.OewpC

It seems that the silencer is very low, do you think it will not be in contact with the rear brake caliper?

I know it won't because it doesn't even get close. Could have heated it up and bent it up but I like that I could make the standard rm250 mounting work and swap it for any other silencer at a moments notice. It is a little low but the plastic exaggerates that compared to the steel frame style too.

1
SoCalMX70
Posts
3499
Joined
4/1/2008
Location
Thousand Oaks, CA US
6/19/2025 9:50am

Just sharing the new look...

1000010420 1.jpg?VersionId=6raGc0U3PGDYGpHdVLeF9BFqJS5ml81000010422
17

The Shop

6/19/2025 1:18pm
SoCalMX70 wrote:
Just sharing the new look...

Just sharing the new look...

1000010420 1.jpg?VersionId=6raGc0U3PGDYGpHdVLeF9BFqJS5ml81000010422

That is slick!

6/28/2025 11:22am

s1200 89142650 1270541771.jpg?VersionId=gC3

The graphic theme just simple and clean. Factory kx 250 sr (Bubba stewart) late 2004 (05 preseason) test.

15
7/4/2025 9:31am
-MAVERICK- wrote:
1000007734

Marv,s bike ? Really happy with the hgs Budd pipe I ran it with a fmf shorty. IMG 3646

4
3
-MAVERICK-
Posts
65603
Joined
3/26/2015
Location
Ontario CA
7/4/2025 10:21am
Marv,s bike ? Really happy with the hgs Budd pipe I ran it with a fmf shorty.

Marv,s bike ? Really happy with the hgs Budd pipe I ran it with a fmf shorty. IMG 3646

Kaven Benoit's bike. 

3
-MAVERICK-
Posts
65603
Joined
3/26/2015
Location
Ontario CA
7/4/2025 3:25pm

Cobra 'KX65'

1000007769
5
1
Bearuno
Posts
5248
Joined
6/28/2014
Location
AU
7/5/2025 12:57am
-MAVERICK- wrote:
Cobra 'KX65'

Cobra 'KX65'

1000007769

A KermyCobra? Or, CobraKermy? 😁

bonseff
Posts
1994
Joined
3/29/2011
Location
Frisco, TX US
7/9/2025 8:45am
image 1844

 

11
bonseff
Posts
1994
Joined
3/29/2011
Location
Frisco, TX US
7/15/2025 7:41am Edited Date/Time 7/15/2025 7:41am
image 1850

 

7
7/15/2025 7:45am

ATK 125 now a 144 still racing it. IMG 3720 4.jpeg?VersionId=IfHKHS1S

7
1
bhamm4
Posts
21
Joined
3/16/2018
Location
Rigby, ID US
7/15/2025 9:33am

06 cr 250 I rebuilt from the frame up. It was a budget build and the first one I did. Can’t wait to do another. IMG 1427 2.jpeg?VersionId=lPVMLXM4UaXTdIx.WK2ivxIMG 1420 2IMG 1425 2IMG 1428 4.jpeg?VersionId=hR7vSAVFEIuQ

6
KHNC
Posts
613
Joined
5/24/2023
Location
East Flat Rock, NC US
7/25/2025 10:45am
-MAVERICK- wrote:
10000077631000007764.jpg?VersionId=sm76.5CF7k2XDBnC4Hqw1qKoRf6HN1000007765100000776610000077671000007768.jpg?VersionId=6ZptmKhqsX8Y.zV1wGf0uLKDnWT

No way this bike gets ridden at all!! 😃

Tomok
Posts
230
Joined
9/10/2010
Location
Epping, NH US
7/26/2025 9:30am
-MAVERICK- wrote:
10000077631000007764.jpg?VersionId=sm76.5CF7k2XDBnC4Hqw1qKoRf6HN1000007765100000776610000077671000007768.jpg?VersionId=6ZptmKhqsX8Y.zV1wGf0uLKDnWT
KHNC wrote:

No way this bike gets ridden at all!! 😃

I think Liberace rode it one time.

2
1
bonseff
Posts
1994
Joined
3/29/2011
Location
Frisco, TX US
7/27/2025 3:01pm Edited Date/Time 7/27/2025 3:02pm

image 1899

 

7
7/27/2025 5:19pm

My 2011 YZ250 with 2015 plastics - Eli Tomac edition. 09 yz450f swingarm conversion, new gen four stroke brake pedal, lots of carbon, Ti pegs. If you want to see my step by step build I posted it in the Bike Builds section under “Project - Beast Mode” 

IMG 1211 5.jpeg?VersionId=B6xtVhuS5.GCb6hWEEN6.wufIMG 1225 6IMG 1232 1.jpeg?VersionId=hOLNcbzVwRmEMaTHK8w4rnQchLdGTIMG 1233 7IMG 1235 3IMG 1236 4.jpeg?VersionId=CmSWtbW8gzHk4tbxonImPIMG 1237 4IMG 1264 2.jpeg?VersionId=UyQj474S0UAOe1Vj6yU4IMG 1281 4.jpeg?VersionId=REdDzGO6FNr2PFRMnFa3s8.AUr
18
CrGuy2T
Posts
4503
Joined
3/11/2015
Location
Santa Fe, TX US
7/27/2025 6:13pm
My 2011 YZ250 with 2015 plastics - Eli Tomac edition. 09 yz450f swingarm conversion, new gen four stroke brake pedal, lots of carbon, Ti pegs. If...

My 2011 YZ250 with 2015 plastics - Eli Tomac edition. 09 yz450f swingarm conversion, new gen four stroke brake pedal, lots of carbon, Ti pegs. If you want to see my step by step build I posted it in the Bike Builds section under “Project - Beast Mode” 

IMG 1211 5.jpeg?VersionId=B6xtVhuS5.GCb6hWEEN6.wufIMG 1225 6IMG 1232 1.jpeg?VersionId=hOLNcbzVwRmEMaTHK8w4rnQchLdGTIMG 1233 7IMG 1235 3IMG 1236 4.jpeg?VersionId=CmSWtbW8gzHk4tbxonImPIMG 1237 4IMG 1264 2.jpeg?VersionId=UyQj474S0UAOe1Vj6yU4IMG 1281 4.jpeg?VersionId=REdDzGO6FNr2PFRMnFa3s8.AUr

I got some forks for you 🫣

1
-MAVERICK-
Posts
65603
Joined
3/26/2015
Location
Ontario CA
8/8/2025 7:17am

First Ducati conversion. 

10000080531000008054100000805510000080561000008057.jpg?VersionId=KSxomz2iYITD68HPgyW6mchxm5KdXvd10000080591000008060.jpg?VersionId=cey4dmANjsK e10000080611000008062100000806310000080641000008065.jpg?VersionId=l4TdEFicvI9XGSsafvInb7muuG
15
2
Bearuno
Posts
5248
Joined
6/28/2014
Location
AU
8/8/2025 8:56pm Edited Date/Time 8/8/2025 8:57pm
-MAVERICK- wrote:
First Ducati conversion. 

First Ducati conversion. 

10000080531000008054100000805510000080561000008057.jpg?VersionId=KSxomz2iYITD68HPgyW6mchxm5KdXvd10000080591000008060.jpg?VersionId=cey4dmANjsK e10000080611000008062100000806310000080641000008065.jpg?VersionId=l4TdEFicvI9XGSsafvInb7muuG

Well, someone was bound to do it!

I daresay they can sell the 450 Engine package for quite a considerable sum. So, whoever did this conversion / who is selling / buying it, they get a unique 'special', at what might be a reasonable cost, by todays 'exotica ' standards.

I showed these pictures to friends of mine that are much more 'Ducatisti' than I am, and, they had no conniptions about it. But, they, and I, are not 'precious' about our favourite brand of bike. 

1
Trackdog
Posts
34
Joined
1/15/2022
Location
Shrewsbury, MA US
8/9/2025 6:37am

My first frame up restoration. 

Always wanted one of thee when I was a kid. Used to frequent the local Kawi dealer just to stare and say to myself, some day.......

2005 KDX 200 0.jpg?VersionId=7pAB1UyNQjXGmAEM 0FnZXGVh0BGdGIMG 3790 0IMG 3793 0.jpg?VersionId=MoPs zEgND6JbvYg8ODW.svaIMG 3882 0IMG 3884 0
11
Trackdog
Posts
34
Joined
1/15/2022
Location
Shrewsbury, MA US
8/9/2025 6:41am

What started the passion at this point in my life?

Unadilla MX Rewind. It was a bluebird weekend! Thought I died and went to heaven.

This is 99% finished.1986 Honda CR 125

8
Trackdog
Posts
34
Joined
1/15/2022
Location
Shrewsbury, MA US
8/9/2025 6:45am Edited Date/Time 8/9/2025 6:47am
IMG 9426 0

Sitting by the computer Sunday mornings with my coffee, searching ebay etc for parts...

4
Trackdog
Posts
34
Joined
1/15/2022
Location
Shrewsbury, MA US
8/9/2025 6:58am

But after finishing the CR, my friends said" you can't ride that now!" So it's the centerpiece in my man cave.

So I did a frame up resto an a 2003 KX 125.

2003 kx 125
5

Post a reply to: Kick a** two strokes!

The Latest