2017 KTM 150SX

macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400
Edited Date/Time 10/11/2022 2:56pm
2017 KTM 150SX 43.3 original hours. Bike was completely stripped down to the frame, cleaned, every bearing greased, then rebuilt using a ton of new parts. Only has been started and ran in my driveway. Hasn’t seen dirt yet. Between the kids sports, work schedule, and fishing, just don’t have the time. Sell with a 5 gal VP container of fuel, extra parts and oils. Have MSO for bike since it was purchased out of state. All parts that are listed are brand new.
- EBR Suspension setup for 175lb vet
- OEM top end and gasket kit
- Tusk wheel set
- Dunlop MX33 tires
- Firepower gold chain
- Renthal sprocket
- Keihn carb and JD jet kit (light years better than the stock Mikuni that comes on these bikes)
- VForce4 Reeds
- FMF factory fatty and shorty silencer
- Red Bull KTM GoPro team graphics kit limited edition (very hard to get a hold of)
- Renthal KTM low bend bars
- ODI grips.
- Titanium foot pegs
I’m sure there’s much more I’m forgetting. Brake and hydro clutch have all been bled. Bike is 100 percent ready for the track. Price is $6200 FIRM. No trades, no BS. Will not part out. I don’t HAVE to sell it, just would like to. Located in League City TX








17
1
|
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 6/15/2022 4:19pm
6/15/2022 4:19pm
Still for sale
1
brocster
Profile picture for user brocster
Posts
4474
Joined
6/9/2009
Location
Aliso Viejo, CA US
brocster 6/17/2022 5:27pm
6/17/2022 5:27pm
So damn tempting!!!!
2
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 6/17/2022 9:17pm
6/17/2022 9:17pm
brocster wrote:
So damn tempting!!!!
Give in! Lol
1
1
MaxPower
Profile picture for user MaxPower
Posts
2697
Joined
8/15/2006
Location
NJ US
MaxPower 6/26/2022 10:46pm
6/26/2022 10:46pm
My bikes have more scratches on them by the time I get them home from the dealer. 43 hours, it looks like 4 minutes. Your bike looks so fresh
4

The Shop

See All »
hog501
Profile picture for user hog501
Posts
17
Joined
5/23/2022
Location
Little Rock, AR US
hog501 6/27/2022 9:58am
6/27/2022 9:58am
Damn she's clean
1
ElliotB16
Profile picture for user ElliotB16
Posts
1122
Joined
6/10/2019
Location
Cairo, GA US
ElliotB16 6/27/2022 6:27pm
6/27/2022 6:27pm
Clean ass looking bike!
1
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 7/3/2022 7:59am
7/3/2022 7:59am
$6000 firm
1
2
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 7/8/2022 11:38am
7/8/2022 11:38am
macz400 wrote:
$6000 firm
Sr_Vet_Rider wrote:
That is a smoking deal.
Thanks I think so too. Still no one has came and got this sucker yet 😂
2
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 7/14/2022 12:57pm
7/14/2022 12:57pm
Last price drop to $5800. Will not go any lower. Would rather just keep it then give it away.
2
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 7/26/2022 5:18am
7/26/2022 5:18am
Still for sale
2
tylerbernauer 7/26/2022 10:46am
7/26/2022 10:46am
If I didn't live 24 hours away I would definitely pick this up. GLWS
1
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 7/26/2022 2:53pm
7/26/2022 2:53pm
tylerbernauer wrote:
If I didn't live 24 hours away I would definitely pick this up. GLWS
Road trip! Lol
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/1/2022 1:39pm
8/1/2022 1:39pm
Will sell for $5600 with the stock pegs on it and I’ll sell the Ti pegs separate.
1
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/17/2022 4:03pm
8/17/2022 4:03pm
$5600 for the bike with the Ti pegs and other spare parts.
1
ppalomino
Profile picture for user ppalomino
Posts
122
Joined
2/3/2012
Location
Waterford, MI US
ppalomino 8/17/2022 4:54pm
8/17/2022 4:54pm
You ever up in Michigan?
mxracer828
Profile picture for user mxracer828
Posts
212
Joined
5/23/2020
Location
Lake Elsinore, CA US
mxracer828 8/18/2022 6:50am
8/18/2022 6:50am
Crazy to think you still have this. I know prices are starting to go down and people don’t know what’s going to happen to this economy and they are being tight with their money. I’m trying to sell a bike also with nothing but low balls. Good luck and that thing is badass
3
braaap_man
Profile picture for user braaap_man
Posts
172
Joined
3/19/2018
Location
Valley Center, CA US
braaap_man 8/18/2022 8:53am
8/18/2022 8:53am
^^^ what mxracer said, if you were in Cali I would’ve snagged this ages ago! GLWS man, beautiful bike 🤘🏽
1

Pit Row

See All »
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/18/2022 10:06am
8/18/2022 10:06am
If your interested and buying and having it shipped, I’ve used U-ship before. Sent a bike to Cali for $380 and one to Montana for $460 a couple years ago. Im sure prices have went up though due to the Bidenflation.
1
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/25/2022 6:33am
8/25/2022 6:33am
Still for sale if anyone interested. Willing to work on the price a little bit if interested in shipping.
johnk408
Profile picture for user johnk408
Posts
1062
Joined
1/20/2022
Location
Ft Mitchell, KY US
johnk408 8/25/2022 10:01am
8/25/2022 10:01am
I think the market is settling a bit, at least in my area. A few shops have 22 leftover 150's for not a whole lot more than used 17's/18's were selling for at the beginning of the year. You may not like to, but could probably get more money parting it out. Any motor I have sold has went for about $4500 alone (with carb and electrical) because kart guys use them.
Chris5406
Profile picture for user Chris5406
Posts
169
Joined
5/21/2019
Location
Lehi, UT US
Chris5406 8/25/2022 10:47am
8/25/2022 10:47am
johnk408 wrote:
I think the market is settling a bit, at least in my area. A few shops have 22 leftover 150's for not a whole lot more...
I think the market is settling a bit, at least in my area. A few shops have 22 leftover 150's for not a whole lot more than used 17's/18's were selling for at the beginning of the year. You may not like to, but could probably get more money parting it out. Any motor I have sold has went for about $4500 alone (with carb and electrical) because kart guys use them.
Ya $5800 for a 17 150 isn’t a good deal lmao
1
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/25/2022 11:33am
8/25/2022 11:33am
johnk408 wrote:
I think the market is settling a bit, at least in my area. A few shops have 22 leftover 150's for not a whole lot more...
I think the market is settling a bit, at least in my area. A few shops have 22 leftover 150's for not a whole lot more than used 17's/18's were selling for at the beginning of the year. You may not like to, but could probably get more money parting it out. Any motor I have sold has went for about $4500 alone (with carb and electrical) because kart guys use them.
Wow that’s crazy $4500 for motor,carb and electrical!? I’d do that deal right now
johnk408
Profile picture for user johnk408
Posts
1062
Joined
1/20/2022
Location
Ft Mitchell, KY US
johnk408 8/25/2022 11:57am
8/25/2022 11:57am
Responded to you pm, let me know if you got it as I was on my phone and not sure it actually sent.
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/25/2022 12:06pm
8/25/2022 12:06pm
johnk408 wrote:
Responded to you pm, let me know if you got it as I was on my phone and not sure it actually sent.
I got it and just wrote back. Looks like I might go the parting out route. If anyone is interested in anything let me know! Thanks!
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 8/31/2022 10:14am
8/31/2022 10:14am
Price is lowered to $5400 for the complete bike as is. I already sold the Ti pegs. If I can’t get that, then I will start parting it out if I can sell the motor first.
yz133rider
Profile picture for user yz133rider
Posts
5033
Joined
8/1/2013
Location
Avondale, PA US
yz133rider 8/31/2022 11:04am
8/31/2022 11:04am
macz400 wrote:
Price is lowered to $5400 for the complete bike as is. I already sold the Ti pegs. If I can’t get that, then I will start...
Price is lowered to $5400 for the complete bike as is. I already sold the Ti pegs. If I can’t get that, then I will start parting it out if I can sell the motor first.
My advice, take it for what it’s worth.

Sell off all the aftermarket parts. Put the bike back to stock.

Quick glance saw:
keihin carb sell for 300 shipped
Tusk wheels 375 shipped or more if they’re complete
Full Fmf 300 shipped

Plus you sold the pegs for around 200 I’m sure

Now drop the price to 4200 on Facebook market place and it’ll be sold quickly.

6k for a 2017 150 just wasn’t realistic. I have to take 6k for a 2019 rockstar edition with 20 hours on it.

12k bike 2 years old with 20hrs was halved in value
7k bike 5 years old with 40 hours brings 4k plus you did good.

Plus all the extras you can sell off, bars, reeds, box of filters all that adds up and you’ll be over 5k and not have remotely the headache that parting out the complete bike will be.

And that bikes 2 generations old so the non big ticket item parts won’t bring much.

You may know 10x this information already so take it for what it’s worth.
1
walent215
Profile picture for user walent215
Posts
2513
Joined
12/6/2014
Location
Ridgecrest, CA US
walent215 8/31/2022 12:15pm
8/31/2022 12:15pm
macz400 wrote:
Price is lowered to $5400 for the complete bike as is. I already sold the Ti pegs. If I can’t get that, then I will start...
Price is lowered to $5400 for the complete bike as is. I already sold the Ti pegs. If I can’t get that, then I will start parting it out if I can sell the motor first.
yz133rider wrote:
My advice, take it for what it’s worth. Sell off all the aftermarket parts. Put the bike back to stock. Quick glance saw: keihin carb sell...
My advice, take it for what it’s worth.

Sell off all the aftermarket parts. Put the bike back to stock.

Quick glance saw:
keihin carb sell for 300 shipped
Tusk wheels 375 shipped or more if they’re complete
Full Fmf 300 shipped

Plus you sold the pegs for around 200 I’m sure

Now drop the price to 4200 on Facebook market place and it’ll be sold quickly.

6k for a 2017 150 just wasn’t realistic. I have to take 6k for a 2019 rockstar edition with 20 hours on it.

12k bike 2 years old with 20hrs was halved in value
7k bike 5 years old with 40 hours brings 4k plus you did good.

Plus all the extras you can sell off, bars, reeds, box of filters all that adds up and you’ll be over 5k and not have remotely the headache that parting out the complete bike will be.

And that bikes 2 generations old so the non big ticket item parts won’t bring much.

You may know 10x this information already so take it for what it’s worth.
BOOM
nail meet head
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 9/10/2022 6:57am
9/10/2022 6:57am
Last bump. $5000 price is firm
macz400
Profile picture for user macz400
Posts
1388
Joined
8/20/2013
Location
League City, TX US
macz400 9/27/2022 8:37pm
9/27/2022 8:37pm
$4800 absolutely cannot go any lower. Would rather keep it. For So Cal guys interested, another potential buyer got a quote from U-Ship to get it shipped for $585 FYI
4

Post a reply to: 2017 KTM 150SX