Added reply in a thread KTM 150 SX 2017 carb tuning 10/25/2020 3:50 PM

You can play around with the Mikuni all day and it will be ok, only to then have to change it next time you go out. Or, bolt on a Keihin from the 2016 and live happily ever after.

Added reply in a thread Ktm 150sx talk me out of it 9/3/2020 1:50 PM

Peak HP was I believe 44HP. Do your self a favor and first mods should be a Keihin carb, shorty silencer, and a force reeds. Runs even better after that!

Added reply in a thread Ktm 150sx talk me out of it 9/2/2020 5:15 PM

The funnest bike I've ever had. Not the fastest, just the most fun.

Added reply in a thread Showa A kit xtrig clamps $2200 6/3/2020 12:43 PM

No

Added reply in a thread 2019 CRF450R nearly new part out 5/17/2020 5:58 PM

I’ve parted out a few bikes before. More times than not, you end up getting more than you would if you would sell it whole. The thing with it is it’s a PITA to ship all the parts and it could take a while to get what you want for each part. GLWS

Added reply in a thread WTB: Showa A-kit suspension set for 2008 Honda CRF450R 5/16/2020 10:37 AM

To run the newer crf front fender on 08 triple clamps, you still have to drill 2 holes in the fender to mount properly.

Started new thread New 13-16 CRF450 14-17 CRF250R FX red/black seat cover 5/13/2020 12:03 PM

New FX seat cover. Same cover Reedy ran on his two-two team in 13 for a while. Will fit 14-17 CRF250 and 13-16 CRF450. Out of package but never been mounted. $50. Robinmac82@yahoo.com

... more »

This forum thread has 1 reply

Added reply in a thread New 2020 OEM CRF250R wheel sets 5/6/2020 8:06 PM

Damn that’s a good deal. Just bought a set for my 17 a few weeks ago. Would have jumped at this deal.

Added reply in a thread 2016 Crf250r Go fast parts for sale! 5/2/2020 8:34 AM

Shoot me details on what mapping Tokyo mods done to robinmac82@yahoo.com

Added reply in a thread Help with crf shock lengths please 4/24/2020 9:26 PM

You can run 09-12 CRF450 forks on the cr250 no problem. Just have to run the triple clamps and CR250 lower steering stem bearing. Top is the same.

Added reply in a thread Help with crf shock lengths please 4/23/2020 7:47 AM

10-13 CRF250 and 09-12 CRF450 shock will bolt right up.

Added reply in a thread "Cheap" new KYB kit air forks 4/21/2020 12:04 PM

I’m sure I’m in the minority, but the KYB PSF1 air forks are really good. Easy to set up, light, and work good. Just got to check pressures before you ride. Not a fan at all of the Showa SFF airs.

Added reply in a thread Showa Spring A-Kit From 2020 KX250 4/17/2020 7:53 PM

Any idea on how much PC charged him to make a traditional dual spring setup? I have a set of SFF air A kit forks too that I’d like to do that to.

Added reply in a thread WTB: Any '18 CRF250 parts 4/9/2020 8:11 PM

I have a brand spanking new OEM one $85 shipped to your door. robinmac82@yahoo.com

Added reply in a thread 2013 CRF450/250R Parts lot 4/9/2020 9:35 AM

Are the HRC bar mounts for 1-1/8 bars? Got any close up pics of it?

Added reply in a thread WTB: Any '18 CRF250 parts 4/9/2020 4:57 AM

sold the used one. I have a brand spanking new one and matching rear if interested. Also have a 270mm CRF stuff front rotor kit. Robinmac82@yahoo.com

Added reply in a thread WTB: Any '18 CRF250 parts 4/6/2020 11:57 PM

I have a titanium tank, airbox w/ filter, throttle assembly, pegs, triple clamps, hammerhead shifter, CRF Stuff 270mm wave rotor, KYB A-Kit PSF1 air forks, OEM wheels, front and rear OEM rotors.

Started new thread WTB 48mm or 49mm Showa spring forks for a CRF 4/6/2020 7:19 PM

Looking to get a descent set of 48 or 49mm Showa dual spring forks for my 2017 CRF250R. Not looking for A-kit stuff just stock. Preferably stock valving also. Thanks

This forum thread has 2 replies

Added reply in a thread WTB: Any '18 CRF250 parts 4/3/2020 10:17 PM

I have a titanium tank, airbox w/ filter, throttle assembly, pegs, triple clamps, shifter, OEM wheels, front and rear rotors.

Added reply in a thread ISO Honda XTRIGS ROCS 4/3/2020 8:14 AM

13-20 CRF450R and 14-20 CRF250 share the same triple clamp lower bearing and clamping diameters. They are all interchangeable.