Keihin Carb Hardware replacement

MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
Edited Date/Time 6/7/2021 10:18pm
Is there any hardware out there to replace the stupid phillips head screws on top on the keihin carb? Im sure I could just go to ace hardware and find something, but just wondering if theres a kit to replace the phillips head bolts on the Keihin, and really the YZ250 as well. Thanks.
1
|
soggy
Posts
9126
Joined
12/3/2018
Location
USA
2/27/2021 11:59am
The kx250 keihen carb uses Allen key bolts maybe try those?
MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
2/27/2021 12:07pm
soggy wrote:
The kx250 keihen carb uses Allen key bolts maybe try those?
ill check that out thanks
Rider 5280
Posts
2408
Joined
11/9/2011
Location
Denver Metro, CO, USA
2/27/2021 6:48pm
I think ZipTy Racing and Tokyo Mods is where I've purchased sets.

The Shop

Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
2/27/2021 7:29pm
You can get m4 hex Allen bolts from any lowes , home depot, ace etc
1
cdoggy81
Posts
1496
Joined
1/1/2018
Location
St. Petersburg, FL, USA
2/27/2021 7:41pm
I’ll be selling kits for them here soon when I get my site up & running. 4 stainless steel shcs with Allen wrench for like $5-$6. I’ll also have matching screws for the top of the slide too. I may even get them in a4 stainless too 👍🏻
MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
2/28/2021 3:14pm
Cool thanks for the replies fellas.
m21racing
Posts
649
Joined
7/19/2016
Location
Reno, NV, USA
2/28/2021 3:26pm
I got a pair of small pliers with teeth that I use on stripped float bowl/carb screws. Got it from snap on. They look like mini chanel locks. Ace seems to have a good replacement bolt selection, and only keeps getting better.
captmoto
Posts
5928
Joined
4/22/2009
Location
Rancho Cucamonga, CA, USA
2/28/2021 10:18pm Edited Date/Time 2/28/2021 10:19pm
You can save yourself the trouble on your new screws by buying a set of JIS screwdrivers. Those screw heads look like phillips but they ain't. JIS screw drivers will grip buggered out screw heads most of the time.
4
MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
3/2/2021 10:56am
captmoto wrote:
You can save yourself the trouble on your new screws by buying a set of JIS screwdrivers. Those screw heads look like phillips but they ain't...
You can save yourself the trouble on your new screws by buying a set of JIS screwdrivers. Those screw heads look like phillips but they ain't. JIS screw drivers will grip buggered out screw heads most of the time.
Well that is a nice piece of information right there. I didnt strip them out, but working on the jetting and trying different needles out I knew it was bound to happen and I was trying to avoid that. Thanks.
CSAR FE
Posts
645
Joined
5/30/2017
Location
Tucson, AZ, USA
3/2/2021 1:00pm
Go to ace and find Allen head screws with the same thread pitch. Or get some from sudco. Jets r us is good too, as others have mentioned.
cdoggy81
Posts
1496
Joined
1/1/2018
Location
St. Petersburg, FL, USA
3/4/2021 7:08am
MotoCoUSA - send me your address & I’ll send you my first kit for free 😎 I’ll also try to include the 2 slide screws too.



Someone here in this thread did something nice for me so I want to keep the good karma going & do something nice for someone too!
4
MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
3/4/2021 7:11am
cdoggy81 wrote:
MotoCoUSA - send me your address & I’ll send you my first kit for free 😎 I’ll also try to include the 2 slide screws too...
MotoCoUSA - send me your address & I’ll send you my first kit for free 😎 I’ll also try to include the 2 slide screws too.



Someone here in this thread did something nice for me so I want to keep the good karma going & do something nice for someone too!
Oh hell yeah man thank you! Ill be sure to do the same when I get a chance to.
1
cdoggy81
Posts
1496
Joined
1/1/2018
Location
St. Petersburg, FL, USA
6/7/2021 12:00pm
MotoCoUSA - did those screws work out ok for you? I want to make sure the lengths were all good.
MotoCoUSA
Posts
368
Joined
2/16/2018
Location
Colorado Springs, CO, USA
6/7/2021 12:15pm
cdoggy81 wrote:
MotoCoUSA - did those screws work out ok for you? I want to make sure the lengths were all good.
Yeah they were good for me man thanks.
2
Factor E
Posts
988
Joined
9/22/2011
Location
So Cal, CA, USA
6/7/2021 10:16pm Edited Date/Time 6/7/2021 10:18pm
Most hobby stores selling RC models have them in packs
Every philips head on a Jap bike is JIS
2

Post a reply to: Keihin Carb Hardware replacement

The Latest